Page 1 of 1
Differences between a XXCR and XXCR BK
Posted: Sat Dec 15, 2018 11:29 pm
by SPLATT
I have what I believe to be XXCR. I don't know the history of the car as I inherited if from my wife's cousin after he passed. What are the differences between the XXCR and the Kinwald version?
Re: Differences between a XXCR and XXCR BK
Posted: Sun Dec 16, 2018 1:57 am
by works92
blue motor mount on the kinwald, front shock tower in a more square design, xcelerator body, blue shocks springs...
Re: Differences between a XXCR and XXCR BK
Posted: Sun Dec 16, 2018 10:39 am
by Essejay
Hello,
There is no hydradrive on the BK edition, all the parts are made from graphite (instead of stiffzell), you also have the titanium turnbuckles from lunsford and Tin shock shafts.
Re: Differences between a XXCR and XXCR BK
Posted: Tue Dec 18, 2018 6:10 pm
by mytimac
Blue wing buttons.
Re: Differences between a XXCR and XXCR BK
Posted: Fri Dec 21, 2018 1:00 pm
by SPLATT
Well It didn't have a body or wing when I got it. It has a squared off front shock tower with blue front shock springs and pink rears. The motor mount is silver but no Hydradrive and the turn buckles I believe to be titanium(they aren't steel anyway). The chassis along with most of the other parts are marked as graphite. One thing I've noticed that I haven't seen on others is where the ESC and receiver are usually mounted a slight recess is machined in. I'll try to get some picture posted soon.
Re: Differences between a XXCR and XXCR BK
Posted: Sat Dec 22, 2018 8:06 pm
by SPLATT
Re: Differences between a XXCR and XXCR BK
Posted: Sun Dec 23, 2018 1:56 am
by works92
nice BK you got there; with some aftermarket parts ( i see losi and trinity)
never seen a machined XX chassis before , probably home made ... gives me some ideas...
thank's for sharing.
PS: front C-hub got a popular modification too (more front bit in long turns)
Re: Differences between a XXCR and XXCR BK
Posted: Sun Dec 23, 2018 2:47 pm
by SPLATT
works92 wrote: ↑Sun Dec 23, 2018 1:56 am
nice BK you got there; with some aftermarket parts ( i see losi and trinity)
never seen a machined XX chassis before , probably home made ... gives me some ideas...
thank's for sharing.
PS: front C-hub got a popular modification too (more front bit in long turns)
Knowing who had it before me I'm positive he bought it the way it is minus the parts box electronics I installed. I'll have to get some pictures of the semi restored condition it's in now. I'm looking to install one of the 2 Novak ESCs along with a period correct motor. I'm going to be going with a modern 2.4 radio and NiMH batteries. My end goal is something I can run on open track days.