RC10Talk - The Net's Largest Vintage R/C Community

Here's a new one, first gen SC10 being built for the street outlaw class so I can enter 2 classes at the races.......................

Full carbon fiber chassis, aluminum/titanium hardware, beadlock wheels and the new Pro Mod Corvette body from Proline which is at Andy's paint for one of his badass jobs..............................

chassis assembly has begun:











More to come.............................

little more progress:

Loving that! What a cool build!

I wonder if this class will take off in the Uk?

Headling wrote: ↑Fri Oct 18, 2019 3:09 pm Loving that! What a cool build!

I wonder if this class will take off in the Uk?

i hope it does brother cause here in the states it is getting bigger then indoor clay tracks for us off-road guys.

Those are some serious shock towers! You might not even need a wing.

Coelacanth wrote: ↑Sat Oct 19, 2019 3:51 pm Those are some serious shock towers! You might not even need a wing.

What sucks is that the front tower was to wide hitting the body so me running my short onroad shocks didnt work. I had an extra Jconcepts carbon fiber stock type shock tower/body mount so I used that and ran .89 body shocks with 6mm limited 1.02 shafts & 3000w oil, hope they work in the real world.......................

Got the body back from Andy's Paint...







Close up of the DE Racing wheel and tire package...



And the Schelle Triple disk slipper...

Preliminary body fitment testing............................ Had to change the front arms to B4, the truck arms were just a tad to wide they fit in the well but couldn't steer.

Body on moved the rear axle to the rear position for better fitment, now just waiting on ESC to match the 3.5T Novak Velociti..................................

















DE Racing Street Outlaw Drag Slicks...........................

Finally got the ESC installed, running the Hobbywing BL120 amp. Race is this weekend the 9th hope she places........................................

that is super sweet.

jwscab wrote: ↑Wed Nov 06, 2019 9:33 am that is super sweet.

thanks bud hope it does way way better then the DS dragster that killed the TrackMaster belt drive trans spur that thing couldn’t go straight if it’s life depended on it, haven’t given up on her yet but that car has no specific class but this one should be a little lore fun to figure out.

First time out with the car went into round 2 and lost, need to do more adjusting on the ESC. Cars pretty consistent but I need to get into the 2's to be competitive, my MPH is there for the 2's just need one more round of races to finalize on the 24th...........................

Broke the rear control arm at the hinge pin on the first test pass

Looking around no aftermarket rear control arms were made except for a “HARD” version from AE and aluminum ones for the b4?????

Luckily I took the DS made number 2 qualifier but lost in round one due to a red light start

Really nice build. Love the body & paint work as well.

Well here’s the sweet looking titanium hinge pin from the rear inner arm mount.