RC10Talk - The Net's Largest Vintage R/C Community

Anyone no the difference between the 10t vs rc10 rpm enhanced steering kits?

Steering knuckles are different. Longer and angled differently.

Damn! Well that sucks guess the hunt continues unless i can find someone that wants to trade.

Do you have the buggy or truck ones?

Truck set

I don't have a set to swap but I would be interested in your truck pair if you want to sell.

I will probably just hold onto it until I find the buggy set.

Is this the set you’re looking for?

He wants the castor blocks and knuckles.

If you are brave, you could trim the truck arms down to buggy size. That's the only difference. There is a rib on the bottom side you need to reshape also.

I was thinking of just using stock rc10 steering arms with the rpm castor block.

mikea96 wrote: ↑Fri Nov 13, 2020 9:53 am I was thinking of just using stock rc10 steering arms with the rpm castor block.

You'll have ridiculous bump steer issues doing that.

Ok guess I will have to wait for a buggy set to come around again.

orangemazda wrote: ↑Fri Nov 13, 2020 12:58 am Is this the set you’re looking for?
0038848E-B27B-4B04-8F1F-44C29E019833.jpeg

I have this in my box but not sure if it’s for rc10/rc10t/rc10t2. Any ideas?

Bholzz wrote: ↑Sat Apr 06, 2024 9:54 pm

orangemazda wrote: ↑Fri Nov 13, 2020 12:58 am Is this the set you’re looking for?
0038848E-B27B-4B04-8F1F-44C29E019833.jpeg

I have this in my box but not sure if it’s for rc10/rc10t/rc10t2. Any ideas?

It was made for the rc10 buggy at the time. But with the proper screws it can be used on the T2. In order to use them on a 10t, they would need to be mounted in the short wheelbase position on the nose plate.