Page 1 of 1
Yokomo WSC 93/94 Arms
Posted: Wed Mar 03, 2021 9:02 pm
by Oozzee
Can anyone advise or know if the WCS 93 came with the lightened arms or the solid arms, searching through the forum I am thinking that it may have been either ???
Photo credit to RC10th
cheers
Re: Yokomo WSC 93/94 Arms
Posted: Thu Mar 04, 2021 5:49 am
by RC10th
Archived..... lol
Maybe something useful or telling?
I wouldn't know what was original on that car due to all the custom machining.
Re: Yokomo WSC 93/94 Arms
Posted: Thu Mar 04, 2021 11:03 am
by Dual
Hey mate,
The Yokomo 1993 WCS production model came with the solid arms. Same versions that came standard on the 1994 YZ10.
Vin
Re: Yokomo WSC 93/94 Arms
Posted: Thu Mar 04, 2021 2:27 pm
by Oozzee
ok good news then, thanks for the heads up,
also have you ever seen this type of rear bulkhead on a WCS
cheers
Re: Yokomo WSC 93/94 Arms
Posted: Fri Mar 05, 2021 10:26 pm
by Dual
Oozzee wrote: ↑Thu Mar 04, 2021 2:27 pm
ok good news then, thanks for the heads up,
also have you ever seen this type of rear bulkhead on a WCS
cheers
Very nice
I have seen similar modifications performed on mag/alu bulkheads in the past. The machining work on the bulkhead on your WCS looks very well executed.
Re: Yokomo WSC 93/94 Arms
Posted: Sat Mar 06, 2021 5:56 am
by RC10th
I wonder who modified your bulkhead as mine has been machined as well. Are there other machined touches to your car?
Re: Yokomo WSC 93/94 Arms
Posted: Sun Mar 07, 2021 2:26 pm
by Oozzee
I will have a look at it again tonight mate and post up some more photos, from my amateur eye it looks stock except for the bulk head
do you have a photo of your bulkhead ??
Re: Yokomo WSC 93/94 Arms
Posted: Wed Mar 10, 2021 6:30 am
by pedro
All the arms i've seen for this model are slightly different from the later yz10 in that they don't have the letters L and R molded into them and they also don't have the small (about 4mm) hole in them up near the bulkhead end of the arm.
Peter
Re: Yokomo WSC 93/94 Arms
Posted: Wed Mar 10, 2021 7:38 am
by RC10th
Oozzee wrote: ↑Sun Mar 07, 2021 2:26 pm
I will have a look at it again tonight mate and post up some more photos, from my amateur eye it looks stock except for the bulk head
do you have a photo of your bulkhead ??
Re: Yokomo WSC 93/94 Arms
Posted: Wed Mar 10, 2021 8:16 am
by Dual
pedro wrote: ↑Wed Mar 10, 2021 6:30 am
All the arms i've seen for this model are slightly different from the later yz10 in that they don't have the letters L and R molded into them and they also don't have the small (about 4mm) hole in them up near the bulkhead end of the arm.
Peter
Great attention to detail Peter. I never noticed this and had to check my own NIB and new built versions. True enough, no L and R markings nor the small hole near the inside of the arm. Cheers.