RC10 Composite Craft Worlds build

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

User avatar
juicedcoupe
Super Member
Posts: 2975
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 229 times
Been thanked: 1737 times

Re: RC10 Composite Craft Worlds build

Post by juicedcoupe »

Phin wrote: Thu Oct 28, 2021 10:53 pm Got lucky and found it on the first search. If you don't already do it, using site:rc10talk.com in the Google search terms, and looking through the Images results are both a big help.
I Google "rc10talk". When you do, an additional search bar will show up in the results. It is much better than the search function on the site and allows you to look at images, even some Photo bucket images that can't be viewed here.
Always looking for new and interesting ways to waste money.

User avatar
morrisey0
Super Member
Posts: 1257
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 54 times
Been thanked: 1227 times

Re: RC10 Composite Craft Worlds build

Post by morrisey0 »

Phin wrote: Thu Oct 28, 2021 10:53 pmGot lucky and found it on the first search. If you don't already do it, using site:rc10talk.com in the Google search terms, and looking through the Images results are both a big help.
What is this Google you speak of? :mrgreen:
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

User avatar
MarkyDents
Approved Member
Posts: 1019
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1335 times
Been thanked: 509 times

Re: RC10 Composite Craft Worlds build

Post by MarkyDents »

Oh good to know, thank you very much. I can’t tell you how many times I’ve tried to figure out how to word something differently on the site search just to end up being extremely frustrated
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

Retro rc
Approved Member
Posts: 530
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 548 times
Been thanked: 380 times

Re: RC10 Composite Craft Worlds build

Post by Retro rc »

MarkyDents wrote: Thu Oct 28, 2021 10:06 pm
Retro rc wrote: Thu Oct 28, 2021 5:44 pm
MarkyDents wrote: Thu Oct 28, 2021 1:07 pm Here’s one that is currently listed on eBay, hopefully the owner doesn’t mind me sharing this pic :wink:
Not seeing a servo saver hole in this one. 9F55B2C1-BE32-4E66-B8A9-EABDFFC38B00.jpeg
Look closer it’s there under the servo saver
Yea I still don’t see it :lol:
😂
508A6CF7-EBEE-44E3-961B-A505B1909E92.jpeg

User avatar
juicedcoupe
Super Member
Posts: 2975
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 229 times
Been thanked: 1737 times

Re: RC10 Composite Craft Worlds build

Post by juicedcoupe »

I'm pretty sure that is part of the servo saver.
Screenshot_20211029-071353_Gallery.jpg
Always looking for new and interesting ways to waste money.

User avatar
Lavigna
Super Member
Posts: 1283
Joined: Wed Aug 05, 2015 8:24 am
Location: Petaluma, CA
Has thanked: 796 times
Been thanked: 1041 times

Re: RC10 Composite Craft Worlds build

Post by Lavigna »

juicedcoupe wrote: Fri Oct 29, 2021 12:16 pm I'm pretty sure that is part of the servo saver.

Screenshot_20211029-071353_Gallery.jpg
This is the bottom of the buggy. There is a cutout.
Attachments
Screenshot_20211028-164206_Chrome.jpg

User avatar
juicedcoupe
Super Member
Posts: 2975
Joined: Sun Aug 16, 2020 8:05 pm
Location: Pascagoula, MS
Has thanked: 229 times
Been thanked: 1737 times

Re: RC10 Composite Craft Worlds build

Post by juicedcoupe »

Yeah, but the white piece that he circled looks like part of the servo saver.
Always looking for new and interesting ways to waste money.

User avatar
MarkyDents
Approved Member
Posts: 1019
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1335 times
Been thanked: 509 times

Re: RC10 Composite Craft Worlds build

Post by MarkyDents »

Okay, now I see it. :lol:
Wow that car is in fantastic condition :D
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

aip47-2008
Approved Member
Posts: 1186
Joined: Mon Feb 09, 2009 2:20 am
Location: Spokane, WA
Has thanked: 135 times
Been thanked: 23 times

Re: RC10 Composite Craft Worlds build

Post by aip47-2008 »

Lavigna wrote: Fri Oct 29, 2021 4:14 pm
juicedcoupe wrote: Fri Oct 29, 2021 12:16 pm I'm pretty sure that is part of the servo saver.

Screenshot_20211029-071353_Gallery.jpg
This is the bottom of the buggy. There is a cutout.
Very Clean. I'd be bidding on that :!:

User avatar
a01butal
Approved Member
Posts: 2397
Joined: Sat Jan 12, 2008 2:15 pm
Location: Shorewood, IL
Has thanked: 33 times
Been thanked: 39 times

Re: RC10 Composite Craft Worlds build

Post by a01butal »

This a really special build and I quietly watched as it has progressed with interest as I have many years ago started a build of a Composite Craft Team car and tried to fit it out with as many RPM Team car parts as possible. When I got to the choice of shocks I was never able to make up my mind but maybe one day soon I will get some gumption and finish it.

IMG_3047.JPG
___________________________________________________________


This is all very interesting!

User avatar
MarkyDents
Approved Member
Posts: 1019
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1335 times
Been thanked: 509 times

Re: RC10 Composite Craft Worlds build

Post by MarkyDents »

a01butal wrote: Sat Oct 30, 2021 3:34 pm This a really special build and I quietly watched as it has progressed with interest as I have many years ago started a build of a Composite Craft Team car and tried to fit it out with as many RPM Team car parts as possible. When I got to the choice of shocks I was never able to make up my mind but maybe one day soon I will get some gumption and finish it.


IMG_3047.JPG
Very nice ! I’m starting to think the Team Car chassis are more scarce then the worlds cars at this point.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
Lavigna
Super Member
Posts: 1283
Joined: Wed Aug 05, 2015 8:24 am
Location: Petaluma, CA
Has thanked: 796 times
Been thanked: 1041 times

Re: RC10 Composite Craft Worlds build

Post by Lavigna »

Well, I was fortunate to find this long CC Worlds chassis. Here it is in comparison to my original short chassis. The top plates are identical.

This latest chassis wasn't brand new. It came from a very crusty buggy. I could tell it was free from scratches and damage. However I did discover that several electronics had been epoxied to the chassis. I spent several hours very carefully cleaning and removing goo and epoxy. It's very hard to remove the epoxy without damaging or removing the chassis material. The final result isn't perfect, but once built none of the small flaws should show.

Now I can start this build, again.
Attachments
20211113_145000.jpg
20211113_145036.jpg
20211113_145111.jpg

User avatar
MarkyDents
Approved Member
Posts: 1019
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1335 times
Been thanked: 509 times

Re: RC10 Composite Craft Worlds build

Post by MarkyDents »

Fantastic !!
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
Lavigna
Super Member
Posts: 1283
Joined: Wed Aug 05, 2015 8:24 am
Location: Petaluma, CA
Has thanked: 796 times
Been thanked: 1041 times

Re: RC10 Composite Craft Worlds build

Post by Lavigna »

I got a start this evening. I finally decided on this vintage RPM steering rack. I was torn between A&L, Composite Craft, or Jconcepts steering setups, but I think this will fit well.
Attachments
20211113_214045.jpg
20211113_234126.jpg
20211113_234146.jpg
20211113_234233.jpg

User avatar
MarkyDents
Approved Member
Posts: 1019
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1335 times
Been thanked: 509 times

Re: RC10 Composite Craft Worlds build

Post by MarkyDents »

Lookin great, what manufacturers hardware are you using ?
I really like their sheen.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

  • Similar Topics
    Replies
    Views
    Last post
  • RC10 Composite Craft Worlds build #2
    by Lavigna » » in RC10 Buggy Forum
    18 Replies
    615 Views
    Last post by Lavigna
  • Composite Craft Worlds build
    by fastang » » in RC10 Buggy Forum
    7 Replies
    1831 Views
    Last post by scr8p
  • '91 Composite Craft/RPM Worlds build
    by vsefiream » » in RC10 Buggy Forum
    63 Replies
    11391 Views
    Last post by Peakey
  • Composite Craft Worlds Car build
    by transamman908 » » in RC10 Buggy Forum
    26 Replies
    2632 Views
    Last post by wyldbill
  • need help with Composite Craft worlds car build
    by asashaw » » in RC10 Buggy Forum
    8 Replies
    776 Views
    Last post by badhoopty
  • Composite Craft RPM '91 Worlds build thread
    by jcwrks » » in RC10 Buggy Forum
    47 Replies
    2312 Views
    Last post by jcwrks
  • Factory Works Composite Craft Worlds Cheater RC10T build
    by Lavigna » » in RC10 Truck Forum
    15 Replies
    4044 Views
    Last post by scr8p
  • my worlds composite craft rc10 on a budget
    by hugger19 » » in RC10 Buggy Forum
    19 Replies
    4258 Views
    Last post by hugger19

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot], No User Avatarsixdub and 0 guests