RC10Talk - The Net's Largest Vintage R/C Community

So, I’ve had this car for evvvvvver in parts. Recently I decided to put it back together and run/race it so I used whatever used parts I had and saved the white parts. However, after careful consideration I elected not to run it and put all the original white parts back on it. I have most all of the original kit parts, but I am a bit confused on the shocks though. Would it have come with gold or the Teflon shocks? Chassis has never been run and I intend to keep it that way. Here’s a pic of it as it sits.

Both shock configurations were sold with the RC10 Graphite. Either is correct. The Team Car had the gray shocks.

https://www.rc10talk.com/viewtopic.php?f=35&t=13059

Ok, that makes since now. Mine did have the teflon shocks and my gold tub(used) had the gold shocks. I’m gonna make a racer out of a TQ10 chassis(used) and try to mimic the AE graphite car. I have noticed though that the TQ10 chassis does flex more than the AE graphite chassis. Maybe a top graphite plate(1.5mm) would stiffen it up. Thanks again