RC10Talk - The Net's Largest Vintage R/C Community

I have bought three SE's On Ebay and they all have different chassis. does anyone know which chassis is a true SE. two have ones the same as the Junior two with the 5 link points and one has the longer one like on my LXT. did the se come with the shorter chassis? thanks

the pro-se should have the 2 sets of rear suspension mounting holes and no side mounts for the 5-link suspension, same as the LXT

So are the ones with the 5link mounting holes are all Junior Two's?

bearrickster wrote:So are the ones with the 5link mounting holes are all Junior Two's?

or junior-T's

that seems to be the only ones you can find. I have about 6 of them. Do you know does the pro use the longer wheel base? thanks Rick

The Pro-se came with the long wheelbase chassis but was to be assembled out of the box in the short wheelbase position.
There is an adapter kit for using the long wheelbase position
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=150227814641
When It gets here I will take pics of the instruction sheet and post it.
The manuals can be found here:
http://www.vintagelosi.com/Manuals.html
The pro-se manual is just an addendum to the pro manual.

I know about the kit I just got one for the LXT I am restoring thanks. I got the book you talked about but it is very vague to say the least. I have a Pro And A Pro se they are very different. Pluse I just bought a Pre se off E-Bay but it has a Junior Two Chassis with the sides shaved off.

What does the wife have to say about hobby parts taking up 1/2 of your sink?

I bet she says the same thing mine does....

during the week she doesnt care but she likes it cleaned up during the weekend when shes home. she is really tolarent of my hobbies!!

I think you guys pretty much covered it all.

As for the "pre-SE" chassis, it's possible that someone just shaved off the sides of the jr2 chassis. I'm not sure if that was something that came from the factory.

regards,
highwayracer

no its not factory looks like it was done on a table saw!! but its not to bad I ment mine is a Pre Se just a pro with a graphite chassis.

bearrickster wrote:no its not factory looks like it was done on a table saw!! but its not to bad I ment mine is a Pre Se just a pro with a graphite chassis.

Dude, that's so funny I stole the quote [with some added punctuation]

Glad you enjoyed it!! but look at the pictures you tell me?