Page 1 of 4
- Andy's conversion kit, escaped from a family... -
Posted: Tue Nov 21, 2006 2:43 pm
by Asso_man!
I finally obtained a Andy's chassis, though not totally complete, but in pristine condition
it also came with a spare rear bulkhead and 2 additionnal rear arms
Posted: Tue Nov 21, 2006 2:47 pm
by Asso_man!
I already build the front end with a graphite shock tower (Lyte speed?) that replaces the missing Andy's one. The specific steering is also missing so I've chosen
a spare aluminium Losi steering rack and add a RPM center link, here's the result
Posted: Tue Nov 21, 2006 5:07 pm
by scr8p
sweet. i need to find one of those chassis', too. and a bulkhead, also.
Posted: Tue Nov 21, 2006 5:34 pm
by Asso_man!
they don't seem to pop-up very often, personally I've never seen one on Ebay, at least not in this shape, all my parts are brand new
I'm going to track the front and rear shock towers, the battery cup and the so special steering rack... if someone has one of those Andy's parts, I could consider swapping my spare parts (rear arms, mountings and bulkhead)
Posted: Wed Nov 22, 2006 12:22 am
by shodog
If I knew they were so rare I wouldn't have hacked my NIB one up to make a chassis for my sprint car.
http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_22082006050157_4.jpg
Posted: Wed Nov 22, 2006 3:30 am
by Asso_man!
if only, if only... makes me think of the song of Lou Reed... do you have the other parts of the Andy's chassis shodog
Posted: Wed Nov 22, 2006 3:39 am
by Asso_man!
Posted: Wed Nov 22, 2006 3:40 am
by Asso_man!
Posted: Wed Nov 22, 2006 7:49 am
by Asso_man!
It going on pretty well...
Posted: Wed Nov 22, 2006 11:27 am
by Asso_man!
Posted: Thu Nov 23, 2006 11:19 am
by Asso_man!
I mounted the rear shocks today, and there's a deal there, since I am missing the Andy's shock towers, I decided to use stock ones (at least in their shape
) the fornt one is ok but the rear one is too low by half an nch or so and the rear shocks can't travel the right way... seems like I'll have to make a custom one or find the one that originally came with the kit
anyway, it will never run, but I like when they could take the track at any moment... I'll post some pics tomorrow (GMT + 1 here
) stay tuned guys
Oh, of course another solution, though more expensive, would be to use some shorter shocks (front truck ones for example)
Posted: Fri Nov 24, 2006 4:17 am
by Asso_man!
Posted: Fri Nov 24, 2006 4:21 am
by Asso_man!
I decided to install the MIP tranny in a chassis that really deserves it
The white brace should be soon replaced by a black one to make it more harmonious...
Posted: Fri Nov 24, 2006 4:21 am
by Asso_man!
Posted: Fri Nov 24, 2006 5:07 am
by Asso_man!
I had to cut the stock battery cup to adapt it to the recessed chassis:
