Page 1 of 1
YZ-10 WCS - black or white?
Posted: Tue May 27, 2008 8:16 am
by minichamps11
Hi,
I'm restoring a YZ-10 WCS (Pavidis) which came with white battery strap posts. I've also got a second WCS which came with black battery posts, and I've seen 1993 YZ-10's which have white rear posts and black fronts!

Any one know which combination (if any

) is correct for a 1995 YZ-10 Pavidis?
Cheers,
Ian
Re: YZ-10 WCS - black or white?
Posted: Tue May 27, 2008 8:44 am
by Asso_man!
Re: YZ-10 WCS - black or white?
Posted: Tue May 27, 2008 4:44 pm
by hkp
99% sure the pavidis was black.. I'll need to check my old ads though..
Re: YZ-10 WCS - black or white?
Posted: Tue May 27, 2008 7:16 pm
by bscotti
add another for black battery posts.
Re: YZ-10 WCS - black or white?
Posted: Thu May 29, 2008 3:35 pm
by minichamps11
Cheers for the answers. I've just checked some old magazines and it was the 1993 YZ-10 with the white glass fibre towers which seem to have white rears with black fronts
Re: YZ-10 WCS - black or white?
Posted: Fri May 30, 2008 5:36 pm
by kenooze
If mine could help somebody

Re: YZ-10 WCS - black or white?
Posted: Sat May 31, 2008 6:18 pm
by minichamps11
Cheers for the photo Cedric. Am I right in thinking the carbon fibre brace for the steering is an upgrade for the Pavidis, not standard?
After looking at your car I have a new question...... my car has a black plastic cap/brace across the layshaft bearings whilst yours has white!! Which is original?
I love those yellow wheel stickers - to me they are a Yokomo 1990's design signature. Can they still be found anywhere or does someone do repro's? (I'm assuming they are a sticker??)
Re: YZ-10 WCS - black or white?
Posted: Sun Jun 01, 2008 10:48 am
by Asso_man!
The carbon brace for the steering is certainly an upgrade, the plastic cap/brace across the layshaft bearings is indeed supposed to be black and Cedric's car is also missing the little carbon brace that bolts on the top deck... I think Cédric built his Yokie based on a 93 Works and just swapped all the necessary parts to make a Pavidis edition
Here's mine for a comparison, totally stock besides one or two screws and tires off course.
http://www.rc10talk.com/viewtopic.php?f=5&t=2580&st=0&sk=t&sd=a&start=30

Re: YZ-10 WCS - black or white?
Posted: Sun Jun 01, 2008 4:10 pm
by kenooze
Yes I upgrade a standard YZ10, but I follow evrything from the original Pavidis edition from screw to Air scoop special body!
I'm sure my spur gear and wing mount are the right one ...
I have more original Yokomo options, look the titanium turnbuckles !
About the small little carbon brace that bolts on the top deck, Yes I miss, but just because I have not, if somebody could help me !
I have some extra wheels dot, in different colors !
David, if you need, I think to have some extra tires like on mine !
I'm not sure if the layshaft cover come black ! I'm pretty sure that's originally white !
Cedric
Re: YZ-10 WCS - black or white?
Posted: Sun Jun 01, 2008 5:26 pm
by minichamps11
After some research I'm pretty sure the motor mount cap should be black. This is because the original (but poor condition) car I'm restoring had a black one (although the middle has been cut out) and this ties up with Asso_man's 100% unmolested car.
Also see this picture.....although this YZ-10 appears to have the white battery posts which is what confused me in the first place!
