Page 1 of 2

Stock RC10 tire replacement?

Posted: Thu Aug 28, 2008 5:58 pm
by call-911
Is there a knock off tire that at least looks similar to the stock RC10 front and rear tires? I'd like to put some new shoes on this BEAUTIFUL box stock car I just got, but I don't want to put 50% of what I spent on the car to go into new tires.

Re: Stock RC10 tire replacement?

Posted: Thu Aug 28, 2008 7:28 pm
by mrlexan
Fronts: early cars, you can either use CRP or AYK, if you can find them. Later cars, there really isn't anything that looks close. I would go with Proline three rib.

Rears: Your best bet is AJs or Tamiya Holiday Buggy... they are plentiful. As for the duplicates, early: Proline did make a close set, but I have never seen them anywhere. Late: Traxxas made something identical with no lettering, but again, I have never seen them anywhere.

Re: Stock RC10 tire replacement?

Posted: Thu Aug 28, 2008 8:52 pm
by call-911
Oops, yeah probably should've specified. The original RC10 with the kidney bean wheels. Would anyone happen to know of a source of the tires Jay mentioned?

Re: Stock RC10 tire replacement?

Posted: Thu Aug 28, 2008 9:56 pm
by JPAE07
CRP has an ebay store where they stock the vintage Tamiya rear and front tires

Re: Stock RC10 tire replacement?

Posted: Thu Aug 28, 2008 11:44 pm
by call-911
Thanks, I'll keep an eye out. No tires currently listed from them. :(

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 7:52 am
by mrlexan
Good luck on the search Keith, it won't be an easy one.

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 8:24 am
by Mr. ED
call-911 wrote:Is there a knock off tire that at least looks similar to the stock RC10 front and rear tires? I'd like to put some new shoes on this BEAUTIFUL box stock car I just got, but I don't want to put 50% of what I spent on the car to go into new tires.
Put up a picture of what you want, that will help us less knowledgable on the rc10 originals and variations to make a suggestion.

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:01 am
by call-911
Here are a couple that I found...

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:35 am
by highwayracer
Hey Kieth,

Traxxas makes a rear tire that's nearly identical to the original Associated tire (the one with Team Associated on the side wall).

Regards,
highwayracer

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:51 am
by highwayracer
As many of you know, Associated used a couple of different tires on the original rc10.

There was the AJ's tires that Kieth's last picture shows. They also had the tire with the TEAM ASSOCIATED on the sidewall. Below is a picture of the TA tire (right) next to the Traxxas Cat tire (left).

The TA tire has a little bit of wear, tha's why the tips of the spikes look a little bit larger. One thing to note, is that Traxxas used 2 types of rear tires on the CAT. This one, and another version that has "V" gorves with the spoke. The tires below do not have a part number on the original header card.
rc10 tire.jpg
rc10 tire.jpg (98.94 KiB) Viewed 1929 times
rc10 tire.jpg
rc10 tire.jpg (98.94 KiB) Viewed 1929 times
Regards,
highwayracer

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 12:18 pm
by Mr. ED
I'll keep an eye ou for stuff like this 'round here, not that I can remember seeing it anywhere yet though.

those fronts are similar to tomahawk or scorpion ones. What diameter is the inner bead of the wheel?

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 2:31 pm
by highwayracer
Oh...one more thing...

Another little secret that I've kept to myself is that the original ultima front tires (for the 2 piece wheel) fit the original rc10.
rc10 tire 2.jpg
rc10 tire 2.jpg (45.49 KiB) Viewed 1874 times
rc10 tire 2.jpg
rc10 tire 2.jpg (45.49 KiB) Viewed 1874 times
Regards,
highwayracer

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:17 pm
by MelvinsArmy
Won't re-release Tamiya Hornet tires work? I put some Grasshopper tires on my 1.4 Tecnacraft rears, I just had to trim some of the inner bead off, they fit just fine.

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:25 pm
by Mr. ED
MelvinsArmy wrote:Won't re-release Tamiya Hornet tires work? I put some Grasshopper tires on my 1.4 Tecnacraft rears, I just had to trim some of the inner bead off, they fit just fine.
It sounded like he was on a search for something which looks closer to original :mrgreen:

Re: Stock RC10 tire replacement?

Posted: Fri Aug 29, 2008 9:56 pm
by MelvinsArmy
Mr. ED wrote:
MelvinsArmy wrote:Won't re-release Tamiya Hornet tires work? I put some Grasshopper tires on my 1.4 Tecnacraft rears, I just had to trim some of the inner bead off, they fit just fine.
It sounded like he was on a search for something which looks closer to original :mrgreen:
Oh that.

Usually I'm good with the details. Not tonight. I'm going back to the TV. :lol: