Page 1 of 1
RC10 Team Car Tub Steering
Posted: Tue Sep 23, 2008 10:29 am
by Wolffux
Hello guys!
I recently broke my steering bellcranks on my RC10 Team Car Tub Version! Is there any possibility to uprade the bellcranks to B3/T3 or B4/T4? Photos and/or discribtion of parts and how to do is greatly appreciated!
I don´t know if this was discussed already! I don´t wan´t to search all topics in this forum!
Thanks in advance!!
Re: RC10 Team Car Tub Steering
Posted: Tue Sep 23, 2008 10:46 am
by scr8p
here's a write up that aeiou did.....
http://www.rc10talk.com/viewtopic.php?f=1&t=5551
or, you can just hunt ebay for an aftermarket kit.
Re: RC10 Team Car Tub Steering
Posted: Tue Sep 23, 2008 1:00 pm
by Wolffux
Thanks, helped a lot! Ordered some parts via Ebay!
Greetings From Germany!
Re: RC10 Team Car Tub Steering
Posted: Wed Sep 24, 2008 9:44 am
by Brandon G
Tower still sells the MIP bearing bellcrank kit.
Re: RC10 Team Car Tub Steering
Posted: Wed Sep 24, 2008 11:29 am
by skunk.werkz
bngiles wrote:Tower still sells the MIP bearing bellcrank kit.
Nope, I bought the last one sometime early summer
Re: RC10 Team Car Tub Steering
Posted: Wed Sep 24, 2008 11:48 am
by Wolffux
Thanks a lot guys! Sadly, that Tower Hobbies ran out of the BB steering ass´y! Would´ve been intrested me!
At the moment I´m helping myself with 2 old cross servo arms which I cutted and mounted to survive training day at our track
!
Here is the pic:
Re: RC10 Team Car Tub Steering
Posted: Fri Sep 26, 2008 1:00 pm
by badhoopty
how'd you break a bellcrank?
skunk.werkz wrote:bngiles wrote:Tower still sells the MIP bearing bellcrank kit.
Nope, I bought the last one sometime early summer
i never much cared for the mip bellcranks with the uber thin bellcrank posts anyway...
i really wish ae would re-re the worlds car... imagine how much easier that would make things...
Re: RC10 Team Car Tub Steering
Posted: Fri Sep 26, 2008 8:48 pm
by wyldbill
kippy from dirtoval.com makes these,
http://cgi.ebay.com/TERMINATOR-RC10-ALUMINUM-STEERING-BELL-CRANKS-DIRT-OVAL_W0QQitemZ360092310954QQihZ023QQcategoryZ34061QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
they are for dirt oval terminators but are the same as the worlds except for some added ackerman holes.
then there are the G.F.R.P. ones that dustin makes that are made from delrin
http://rc4less.com/GoFastRacing_Dirt_Oval_Part/c10/p124/GFRP_Bellcrank,_Standoff_Posts_&_bearings/product_info.html
either of these should work as sutiable replacements.
Re: RC10 Team Car Tub Steering
Posted: Sat Sep 27, 2008 7:07 pm
by Wolffux
badhoopty wrote:how'd you break a bellcrank?
skunk.werkz wrote:bngiles wrote:Tower still sells the MIP bearing bellcrank kit.
Nope, I bought the last one sometime early summer
i never much cared for the mip bellcranks with the uber thin bellcrank posts anyway...
i really wish ae would re-re the worlds car... imagine how much easier that would make things...
Oh yes! It "worlds" make life and getting spares a whole lot easier!!!