RC10Talk - The Net's Largest Vintage R/C Community

Hi
My name is David and I am new here. Let me try and sum this up quickly. While trying to find info on some T4s for my kids I found out that there was still interest in the old RC10. I went and dug out my old Dually Conversion and since it had been sitting for 15 plus years the front tires dried out and cracked. So I was wondering if there is anything that would work, even just enough so that it can sit back on the shelf and look decent.



The ones I need are for the front. They were the two piece chrome, but I changed the outside to some aluminum. The back tires are proline slicks but they are OK.

Thanks

Lets see a body off pic of it.Is that the TMS KIT?Or custom done?There are some tms alloy wheels on ebay sometimes.DON

Like that paint job. Welcome to the board

Yes this is one of the TMS kits.I will get some pictures without the body. I think I titled this post wrong, it should have been tire size. I have the Original dually wheels, but I took them off. I was going for more of dragster dually look, so I put wheels discs on the rear with slicks and then the centerline type wheel in front. Glad you like the paint. I had a friend at work do all the line work with a sharpie, then I taped it off and shot it with spray cans.

Dave

I believe the fronts are 1.9s