RC10Talk - The Net's Largest Vintage R/C Community

Were the best place to get bearing for RC10? and what size do i need for the rear hubs.
Tahnks

Boca bearings probably has a kit with all the bearings for your car. I got a set for a JRX2 on eBay it was about $17. Excellent product and very reasonable price. http://www.bocabearings.com

rear hubs are either 1/4x3/8 flanged or 3/16x3/8 depending on the axles and hubs you are using.

I buy my bearings from avidrc.com $1 each for most metal bearings, more for the ceramics and baja 1/5 scale bearings, shipping is always quick and reasonable.

Avid RC,,, hands down! great to deal with, most plain metal and their sealed "revolution" bearings are a buck each!

a01butal wrote:Boca bearings probably has a kit with all the bearings for your car. I got a set for a JRX2 on eBay it was about $17. Excellent product and very reasonable price. http://www.bocabearings.com

Do they include the 2 oddball size bearings in the diff? (can't remember the size exactly)

I always went with Avid. Never had any problems with orders, price, or quality.

bngiles wrote:

a01butal wrote:Boca bearings probably has a kit with all the bearings for your car. I got a set for a JRX2 on eBay it was about $17. Excellent product and very reasonable price. http://www.bocabearings.com

Do they include the 2 oddball size bearings in the diff? (can't remember the size exactly)

I always went with Avid. Never had any problems with orders, price, or quality.

Yes it is all included I have been building a JRX2 and a Pro, all bearings are included and I've already built the 2 gearboxes.