Does anyone have or know of a place to get a template for drilling a gold pan for a stealth trans? Anybody have a rental .
I don't have the funds to buy a drilled chassis right now and it's the last thing I need to do to get the racer ready. I could use a paper template if there is such thing then try and transfer it to steel .
Is this a rare weave pattern? I have several graphite chassis and this is the only one like this I've ever seen, anyone else have this weave pattern?
Last post
Yeah production variation was pretty constant. I'm sure it's a less common part, but hesitate to say it's worth more or less than any other graphite chassis(other than the very late version that was shaped differently). If it's in great condition,...
I've been collecting hardware for RC 10's for a year! I would appreciate a source, like a manufacturer (so I can get a bunch of them) .
I can't find any small pattern 4/40 nuts. Any one have a lead?
Last post
Glad I was able to help you out. :)
It can be quite difficult to find small specialty hardware. I've spent many hours looking, and places either require you to buy in really large quantities or don't sell to the public. I've found that...
Anyone whose been around here or enjoys racing vintage knows the countless threads and ways we adapt 2.2 rubber to our cars. I can't help but wonder would anyone be interested say a modern Barcode or whatever clay type tire yet in the old 2.0 or 1.9...
Last post
I think a good portion are, but you'd think they would be more clear on every one of them as not to mislead. Worth referencing and searching if you find one you like
Ignoring the compound, just looking at tire tread patterns. What would you prefer for use on grass - square blocks, or round spikes?
I guessblocks will last longer in any environment as they are chunkier and each block is typically larger and...
Last post
If you're talking about racing competitively with them. I usually get maybe 4 meeting out of a set of rear minispikes before they drop off too much. So that's 16 races for me. You can rejuvenate them though half way through their lifespan by...
Getting worried about breaking my transmission and spares are hard to find. So I'm considering using a different unit. Do we have any bolt patterns?
Last post
couple of guys have retrofit B3 and B4 transmissions to the gold pan. Search through the forum or use google advanced search for 'b4 transmission gold pan' (the search here will ignore 2 letter words). Toastedcoastie is one guy I know did it....
Does anyone know what kind of bolt goes on the end of the differential shaft? Mine stripped out and I don't have any more, there is not a part number in the original manual.
Last post
I hope you or the previous owner didn't put a 4-40 nut on that shaft. That would pretty much do it it.
I am in the making of an adapter for the old RC12l/LW/LS to mount the newer 3-bolt wheels. I know one is available from shapeways, but I want it made out of alloy. I just need the exact diameter of the 3-bolt circle. It is not very exact to...