RC10Talk - The Net's Largest Vintage R/C Community

I double checked that connection but i'll check again. I know this is a dumb question but where and how should i apply the "AE diff lube"? Do I just rub it on the pinion and spur gears or is it designed to use on the internals of the transmission? or something else? Also, suggestions on wh...

That sound correct on the motor. It definitely sounds like alot of vibration in either the gear or the shaft or both. Since I was NOT impressed with the speed of the buggy last night I may go ahead and either go brushless or buy a faster brushed motor. Since i'm just getting back into this, I don't ...

Finally got the ol RC10 gold pan running last night and a couple issues arose. First, I noticed immediately that at about half throttle the gears or either the motor made a screaming noise from time to time like there was vibration or either it needs lube. I have the original diff lube so do i just ...

How does a new Futaba S3010 sound? Is that a good one?

I mean its only about 24 yrs old! hhhahaha

Finally got her running last night with the LiPo and Losi ESC. The engine or either gears are making a screaming noise from time to time which I'm thinking is because there is no diff lube on them. Let me know if you know what causes that. Battery life is great. I'm running a new Futaba 3PL and the ...

OMG! I just watched the worlds fastest RC10 video on youtube. 86mph?!?!?!?! I guess u just pull the trigger and hope it stays straight

Super awesome buggy man

Motion Magic dirt oval on Airport Blvd in Mobile, AL. They would bunch all the buggies together 2 and 4wd and let us rip. That's when my RC10 was new and I could kill any of the other competitors(once I got the front bumper installed) hhahaha. Before the bumper I popped the left turnbuckle off every...

That's fast, that's real fast. Take the wing off, raise the springs to lower it and put skinny tires on it. Turn this into a bonneville salt flat runner hhhahaha. Glue solid discs on the outside of the wheels

AWESOME! Lucky for me, the parts chassis i bought has this setup! However, it is a graphite chassis with Andy's front arms so the clearances are way different than the stock chassis. I noticed yours has what looks like some type of metal spacers under the bellcranks. I am about to try to space mine ...

Ok I'm getting a little frustrated. I've purchased a new GT and the B2 steering setup and neither looks like they will work because the bolt diameter is way larger and the servo rod mount is in line with the bellcrank instead of being at a 90 degrees angle to it. Am I going to have to spend 20 bucks...

Agreed, I was afraid of doing that cause that board looks menacing but since I already bought the 3PL I'll tackle it now. Thanks.

My does not spin AT ALL which leads me to believe it needs a rebuild. Also, are you supposed to get opposite direction wheel travel all the time? Mine is very intermittent.

That is an incredible find. Congratulations!