RC10Talk - The Net's Largest Vintage R/C Community

BattleTrak wrote: ↑Sun Nov 26, 2023 11:13 am You ordered the correct dogbone. The telescoping driveshafts can be used with the retrofit trans if you get the A-3095 outdrives.

Thank you!

Do you know if bodies from other LOSI 1/10 scale trucks fit the LXT or even if a body from other brands fit?

Than you!

juicedcoupe wrote: ↑Sat Nov 25, 2023 10:28 pm The Cobra motor is likely a tuned Trinity Monster Stock Jr. That bright pink can jumps out.

That is a Bolink Legends spec motor. I think they are 19T but I'm not positive.

Thank you! I appreciate it.

CAM made pretty good brushed motors. That Super Stock is one of their later motors. PXL_20231126_032540105~2.jpg . PXL_20231126_032636016.jpg . Cobra motors seem to be a little less common than CAM motors. The Venom stock aren't always that colorful but that looks right. I occasionally see motors l...

Hey guys, I recently came across 3 Losi RC's (a JRX Pro and 2 LXTs) that were raced back in the early 90s. They came with a bunch of brushed motors and there are a few of them that I cannot identify. Has anyone seen these? One says something like CAI11 Super Stock, another is a Venom Cobra, and the ...

Hello, So I picked up another used Losi LXT. This one seems in decent shape over all with one major issue. The right rear driveshaft is broken/missing (pictures attached). I got a few accessories that included rear universal shafts and I think they might fit the truck. It looks like plastic universa...

ChocoTaco73 wrote: ↑Wed Nov 15, 2023 12:20 pm That poor motor is overgeared like crazy, good thing it has that heat sink

It ran really good! I went hard for like 5 min straight on a baseball field before it started to get hot. It went 33 mph on pavement which was quicker than I expected too. It handled great.

ChocoTaco73 wrote: ↑Wed Nov 15, 2023 12:20 pm That poor motor is overgeared like crazy, good thing it has that heat sink

Sure is! I only plan on running int for 2 or 3 minutes on road and if it is too bogged down I will not run it on the baseball field..... but maybe it will do okay... we shall see.

Thanks guys! Well, I am learning there is a lot of specialty parts to vintage Losi's and I am not sure I am going to keep it (I am more likely to keep the truck). I will probably make a few videos of it (I took off the rear tires and put some Traxxas tires on the rear as I am going to run it on pave...

So I recently got this Losi buggy that I am fixing up and it says JRX2 on the front of it in the plastic molding but it does not have the weird rear suspension arms of a JRX2. It guess it is pretty JRX Pro like but it does not have the big socks up front. I was not sure if this was a modified JRX2, ...

You'll need 133 and 136 then it'll all go back together minus the hydradrive. Thank you! It has the same part number A-3124 for 133 and 136. So this looks like everything? https://www.ebay.com/itm/335088521339?chn=ps&mkevt=1&mkcid=28&srsltid=AfmBOopR7fhGpqjLt6A83szrL_Kq3iIkbrdA9m3pw9VZR...

That is not a JRXT...it’s a LXT. It has some nice upgrades..Tecnacraft titanium turnbuckles, Litesink, A&L/Factory Works Steering arms and RPM gear cover and tall chassis brace. The transmission is the Retrofit with slipper and Hydradrive. I wouldn’t recommend trying to get this to run 70mph..y...

Toyotachris1982 wrote: ↑Sun Nov 12, 2023 8:15 pm Looks like a nice LXT! Like mentioned on the earlier post. It has some nice upgrades added also. Yours also has the nice "Retrofit" transmission

Thanks, looks like I am going to have to change the titles of my videos! Oops!

That is not a JRXT...it’s a LXT. It has some nice upgrades..Tecnacraft titanium turnbuckles, Litesink, A&L/Factory Works Steering arms and RPM gear cover and tall chassis brace. The transmission is the Retrofit with slipper and Hydradrive. I wouldn’t recommend trying to get this to run 70mph..y...

Looks like you have a Losi hydra drive on the truck. It should have a slipper also. Take a look at Dan's site OLDRC.COM / Sabula Tech. http://www.vintagelosi.com/Instructions_files/HydraDrive_A3100_1.pdf Try not to put too much power to the trans. The diff can have a tendency to slip, get too hot a...

Hey guys, I always had Kyosho RC cars growing up but I recently had a chance to get 2 Losi RC's and I was able to get both of them for a total of $100. I had to give them a try! They are by no means shelf queens but that is good because I am going to run them! One is a JRX2 (I think) and the other i...