RC10Talk - The Net's Largest Vintage R/C Community

Asso_man! wrote: ↑Wed Jan 11, 2017 5:39 am Clear shocks were made by Hammad Guman and although they look trick, they are a PITA and leak quite badly. These are Losi versions but they also made Associated style shocks.

Haha not to mention they're about as rare as unicorn farts! I've been looking for a set for a long time now

Man, that Lego set brings back fond memories. :D 852 is a crap model for playability :twisted: The rack&pinion relies solely on clutchpower to hold it together and the transmission is really only 1WD :roll: Ok ok, so it's from Lego's first generation of Technics. But how long did we have to wai...

I have found that the best offset is 0 in the front and 3mm or 6mm in the rear if im using a 200mm HPI body. You can go wider in the rear if you run the 200mm front/210mm rear HPI bodies like the barracuda, challlenger and 68 camaro. I have a 6mm offset wheel with a wide hex to get the tire close to...

Sometimes you have a clearance issue. On my lamborghini DS i used 0 offset Associated NTC3 12mm hex wheels and they spin freely when fully turned without rubbing suspension arms. At the same time i have my DS Camaro with HPI 0 offset vintage wheels and those tend rub when fully turned. I remedied th...

How about if you take out the bottom shock bolts and swing everything up?

I have a truck already missing shocks. It kinda works.....

hahaha guess i dont have to measure the box bud................................................

Avid 12mm adapter part number av1014. There is a set on ebay

Might try going directly to Avid
https://www.avidrc.com/product/5/accessories/437/B41-12mm-Spring-Collar-Adapters-AV1014-accessories.html
$7.00 + $4.?? shipping. Ebay $17 - $30

Chuck

8443 are 3/16 axles
10L wheels are made for a 5/16 flanged bearing
Thus you need a 3/16 x 5/16 flanged bearing (same as the RC10 used)

Original axles were 1/8”