RC10Talk - The Net's Largest Vintage R/C Community

I have the top shaft,and spacer.....The shaft diameter of the b4 is way bigger than stock......Even if I change the bearing size is still wont work? Not sure whats going on here? I did notice one thing, I have the mip aluminum top shaft,Pretty possitive it is the same as the stock unit? Maybe? The ...

I think some of the lazer kits had the plastic battery straps on the parts tree, but those kits likely also had the frp battery straps in a bag. Lots of un used parts on the plastic parts trees.

Ahh, I do that all the time... waste money on stuff that I thought would work and it doesn't or it's a part that I already have!

I dig that ESC, very nice

Nice job indeed -- the body looks amazing. Is the metallic gold paint a transparent color applied over a silver base perhaps? It looks great!! 8) Thanks to all for the kind words. For the "yellow" color I used Tamiya Gold PS-13 (picture below) and backed it with silver. It is ridiculous h...

Yes the final machining is done post anodizing. I highly doubt it is reanodized after.

Set money aside, keep you’re eyes open. I used to see stuff like this and think “man I can’t afford that”. Setting money aside gives you time to say, “I can afford that”, and it gives you time to see other options. You might find a super clean built example for half the cost. Anyways keep your head...

I'm curious; why doesn't the idler gear shaft pass through both sides of the case?

It's landed... IMG_20210811_160607_m.JPG IMG_20210811_160550_m.JPG IMG_20210811_160538_m.JPG IMG_20210811_160525_m.JPG IMG_20210811_160520_m.JPG IMG_20210811_160458_m.JPG IMG_20210811_160450_m.JPG IMG_20210811_160442_m.JPG A few non-standard bits I think. Looks like nylon bulkheads. If anyone spots ...

I picked these 3 up from a local seller who’s clearing out a house. The previous owner must have been a real enthusiast……

Welcome rwordenjr, lots of great people, RC vehicles and info here.
- limestang

Matching Composite Craft rigs with Andy's paint.

Some more mock up with Pavidis style rear 3d printed arms with rear diff and rear belt in to get a sense of fitment.

Found a few more GPM alloy parts for this so on they go.... super-rare top deck and also the steering link. Just the front and rear gearbox eccentrics to add now. I have also added some Japanese mag decals across the battery straps and switched the motor to a red prism label 30deg 1990 Demon 27turn ...

mikea96 wrote: ↑Thu Oct 20, 2022 1:47 pm Hey also did you cut those arms by hand or are they machined?

by hand

All done.