Bellow is a Yokomo Timeline of all the Yokomo Off-Road cars that I am aware of. I have heard of other versions (not listed below) such as the 'Craig Drescher' Version but I cannot personally confirm the release of such models ( Maybe there is...
Last post
Hi,
Bellow is a Yokomo Timeline of all the Yokomo Off-Road cars that I am aware of. I have heard of other versions (not listed below) such as the 'Craig Drescher' Version but I cannot personally confirm the release of such models ( Maybe there is...
Something new I started on. Fanrc chassis kit and a works 91 donor car. Cleaned up the aluminum bulkhead, finishing up on motor mount and the caps are painted and drying. Next rebuild diffs with new pulleys and install with new 2mm pitch belts.
Last post
Thanks and yes I used the re-re rear arms and haven't decided on the steering arms yet.
SOOooo..
Here's the resto of my boxart Dogfighter.. man alive I used to lust after this off roader (well out of my price range back in the day) always had the...
As per my last post concerning the fitment of th re-re motor mount. I just got in all the parts to check for fitment of the re-re 870c slipper on an original 870c, works etc. As you can see from the photographs below it works and the fitment appears...
Grasping at straws these days looking for another Yokomo project to keep me occupied and I started thinking (yes, it hurt :lol: ). Given the current price of anything YZ10 related, there have been some amazing reproduction parts become available as...
So, a friend of mine says he has an 80% complete YZ-10 and was wondering if I wanted it. I get my hopes up as I've always wanted one but haven't come across one, nor have I actively searched for one either. Anyways, he brings it in and it turns out...
Last post
My first attempt at making a “vintage” battery
MCI Stickers, and white shrink wrap. Had to redo them once as I wasnt aware that the cardboard sleeve would just slide off, so I put the shrink wrap over it. Then it wouldn’t fit in the chassis. All...
I originally posted this on one of the Yokomo Facebook groups but I thought I would also post it here as, quite frankly facebook is absolute trash for anything other than posting pictures and asking for parts.
First I want to start off with a thanks to all the forum members who have put up and are about to put up with :lol: a number of questions regarding this restoration project. Forum member 59Burst was kind enough to sell me this car and shipped it all...
Last post
Thank you for leaving it for me sir, I might have cried if I missed out on this one lol
This could take awhile but one has to start somewhere :D
I can't believe how modified the 4wd cars were back then about the only stock part is the motor mount everything else is either modified or replaced the car you purchased in the shop was...
Last post
Absolutely incredible build, thank you so much for sharing your journey. I really hope Cliff Lett see’s it one day :D
Me and my brother are gathering parts to replicate this car....does anyone know where to get similar 1.5 tires? they dont have to be exact just close....thanks
20200821_162921.jpg
Last post
That is an amazing Yokomo! If it’s a runner, post some race footage!
Hi, everyone! I'm new to the board. I signed up because Google searches kept landing me here; sounds like there are knowledgeable people, here. I'll probably be bombing the Losi forum, before too long.
When I got...
Last post
Last night I did my most anxiety inducing task, which was to trim the body. I try and leave extra material the the rough cut because I'm always afraid of trimming too much, but I had done the ends of the bottom tray years ago and must have taken too...
Here are some relatively rare Yokomo 870c white nylon suspension arms. I'm tempted to replace the black arms with these.
As close to Jesus' legendary cup as there is :)
Last post
If you want an alternative, I have had these floating around for years, honestly, until today didn’t realize they were that rare….these look like fronts? But happy to chat if you need them.
I will have to pass on your generosity as I will be...
Another conversion kit for the Yokomo YZ-870c/YZ10 but this time from the U.S.A. courtesy of J.D. Beckwith's former company Duke Concepts. Just like Craig Drescher and CML did with the Yokomo Works '91, J.D. Beckwith (Factory Driver)...
Last post
Where's Scr8p?
All of the files are ready. I just lost my wingman when it came to the delrin stuff. It may get revisited, but I don't know if any of it would work with the rere.
In keeping with tradition I'm making a thread on my latest Yokomo build, thanks to the work of Cheng Fan's amazing reproduction parts, some new old stock Yokomo parts, some old parts including some that I actually used in my 870c as a child from the...
Last post
Painted, the MCI stickers area bit off but acceptable.
I got a custom painted Masami body for my runner last year, but it was to nice to use, hence this build.
Purchased a Bezerk 89 masami kit as a start, I just need to find everything else as all I have are the alloy bulkheads and motor...
Last post
Rob's car courtesy of the vintage bash..... :mrgreen:
Hey guys.
I'm starting my restoration on my 870c i got off ebay many years ago, after receiving I placed on the shelf with my other Yokomos. Only got my hobby room back after a leaking pipe in the wall flooded the room, so I thought it was about...
Associated cars have always been my staple for the past 23 odd years. I always remember seeing the YZ-10 Super dog fighter in magazines and always wanted one but have never really searched for one either.
Well, the day has come where I aquired one...
Last post
Fan RC has titanium turnbuckles now as well.
I just had a look and ordered a set of these, not cheap. I didn't want to buy them just yet but I figured I'd grab them while they were available. Too many times I've sat on my hands only to miss...
Hello!
Can we build a YZ10 based on Pavidis chassis and 97 carbon parts?
Whether both Pavidis Edition and 97 version share the same transmissions? What about suspension arms? Should we use Pavidis front arm with 97 carbon parts?
Thanks 🙏
Last post
P.s. don’t forget to check out ‘Factory Works’ who also has some Yokomo parts :D
After being inspired by both Dan's and Reggie's brilliant WCS builds I have decided to attempt another WCS. Over the last 3 years I managed to collect most of the parts needed for this build, and with Dan's hard work on the chassis it has now become...
This is my vintage 1980s Yokomo Super Dog Fighter buggy unveiled in 2023. This build is 90% complete with period-correct batteries and electronics.
I prefer the look of a lay-down receiver configuration. This allows just enough space for a...
Hello!
Can anyone tell me the major differences between these three cars? It seems the MX4 is pretty close to the YZ10 based on what I have heard. The MR=4BX has a motor placed right at the center.
This is my original race car as hauled out of the loft over the past couple of days.
I originally had an 870c in around 1989 and then upgraded to this (still got the former). We raced it hard and the car got modified quite a bit. I eventually came...
Last post
Martin !
did you found a sponsor in the meanwhile :-) ???
Started my works 91 Project recently, built comes Nicely together. Donor car Was original with Lots of spares.
Will use the original shocks.
Chassis Set is a special one from a good friend of mine.
Last post
Some general built information:
- used Associated ballcups or RPM (on the steering)
- uses FAN RC front arms and original (NIP) rear arms
- FAN RC bulkheads and middle shaft with slipper unit (no one way anymore)
- steering knuckles are from...
Here are higher-quality pictures from RC magazine for Yokomo Super Dog Fighter fans with more detailed google translations. Enjoy! I'm happy my local library subscribes to this magazine :)
What suggestions do you have for their possible reissue?...
Last post
I hope they follow through on this. YZ10 prices have gotten insane and it'll be great to have a supply of harder-to-find parts which don't cost my soul.
Some things on my wish list for an 870 re-re:
1.) Slotted rear bulkhead mounting holes on the...
So this is my best (and cheapest) Yokomo find yet!
It didn’t look like much at first glance but after having a closer look I noticed it’s originality and the lack of track dirt!
Of course the paint job and wheels combination looks super ugly but...
Last post
First stage complete!
The wheels turned out to be the original kit wheels that were brush painted black. The pink was protected by the paint so it’s still super rich and not faded at all!
Gave the chassis a quick wipe down and the metal parts a...
NOTE: Much later I discovered that the chassis brace and shock towers on this car likely point towards it being a 1997 car and not a 1995 as I had originally thought.
While I have stalled on both the 1994 box art and the Kyosho Burns I was...
Picked up this very nice duke concepts yz10. Just needs cleaning and I need to make a new right side steering arm as this one was broke and glued. Trying to decide on pink or white wheels as well.
Nice rear shock mount detail (which is actually the same rock 'n' roll design as the Dunn Pro Radiant front end mod). The upper chassis brace looks to be comprised of two bars as well if you look closely - upper and lower....
Last post
Love the floating left rear wheel in the pics , who ever did the buggy insert on to the arrival must have cut out the rear arm by mistake 😂😂😂😂
Here are some pics of most of the parts for my custom works 92 build. Waiting on my axles to get here as well as wheels and wing and some misc hardware. It has new tub chassis, factory works towers and top deck, 2mm pitch belts, aluminum bulkheads,...
Last post
Ok I mounted the front and rear bulkheads and motor mount. Going to build center shaft and diffs tomorrow and install.
This conversion was advertised in very early 1990 in the UK RC mags, and it turns out the alloy chassis was provided by Racecraft (located just down the road from WASP). This is the only WASP lower chassis I have seen apart from in the old black and...
Hi guy’s, it’s been a while sins I started a building thread here at RC10 Talk. Not sins Drop Box stopped the possibility to link pictures… you can say that I’m a drop out… :mrgreen: But now I will try to make a new attempt to make a new building...
While asking for compatible parts for my Yz10/870, I was approached with this deal on Facebook group. A used standard MR4BX with a TON of parts. One way diff, shock parts, arms, bearings, an extra body etc, to name a few. Worth it to me, and I got a...
Big thanks to Hyung, DerbyDan, Cedric, Jeff, Asa, Lee, Peakey, Masami and everyone who helped!
I had a real headache sorting out the front and rear pitch belts/diffs/TCS, initially I was going for M2 up front and M3 to rear but then Dan and I...
Last post
Hey number 7 unfortunately Dan passed away a couple of years ago. There are some pretty knowledgeable yokomo guys on here so I’m sure someone will be able to help you out
Wow, I am sorry to hear that and my apologies if contacting him was...
I have little experience polishing RC metal parts nor removing rust from vintage parts. Can all of this be done easily by hand and a simple drill?
This is almost 30 years old and is in amazing condition despite the humidity getting the best of the...
Last post
I learned how to do gun bluing on steel R/C parts a couple of years ago and the results are always fantastic. It's the closest thing I've found to a factory style finish. Although the process can give a bluish tinge sometimes but that's to be...
Hey gang, quick question for you. Does anyone happen to know what Yokomo or AE graphite piece Masami cut down to make the custom rear extension for the rear turnbuckles to attach to on his 870? Trying to figure it out is giving me a headache lol
Last post
I don't think it was anything in particular. Just some flat carbon fiber cut to shape. Probably 3mm thick.
Here is my new Yokomo MX4 with Masami style painted body. This is a very clean buggy and all I added was new wheels and tires. I am looking for period electronics and motor.
Last post
Ok I have almost everything to throw on this I want to but still looking for one more set of the blue factory team turnbuckles.
Got a challenge, probably not enough parts to complete 1 but likely enough to get close to 2. Looking to build a Worlds and a non worlds. Then I am on a parts hunt :)
Last post
Cool. Old thread but thought I would respond anyways. I have a new built from box BX and one with the Worlds kit added to it. Both are shelf queens. I also have a used one with some parts that I intend to use as a runner. I will likely need parts....
When I first posted up pictures of my bog standard 834b, which i gained in a trade and by my own admission is absolutely lovely, a couple of people pointed out it wouldn't be long until i built another more modified version to race.
Turns out I...
Last post
Few more parts going on to the mock-up build now, and some subtle trimming and stickering for the Cheetah Dogfighter bodyshell. The rear bar and shocks sit within the bodyshell which is cool, although part of me does think i could dramatically lower...
I recently joined this forum after being suggested so by a facebook group. I've been looking at sales groups etc recently for a Yokomo 870C/YZ10. I'm quite in love with the shape of the car and the simplicity of the engineering so I...
Last post
Apologies yes, you are correct it is a 1993, a car I personally think is one of the best of all the yz10’s.
Does anyone have any information regarding these two '94 onwards YZ10 rear pivot blocks? the one on the right also has a cut out for extra drive shaft clearance.
YZ10 Rear Pivot Block.JPG
Last post
I was hoping someone else would have responded as I also ran into this during one of my rebuilds and wanted to know.
Have to wonder if the one on the right is for something like the later model 95 years whereas the higher one on the left is for the...
I've just received a Yokomo 870c and I'm starting to collect parts for the rebuild.
Does anyone know the size of the ball diffs/thrust balls. I've done a search on here and have come across two answers 3mm and 4mm so not sure which is...
Users browsing this forum: No registered users and 2 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
