This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
well, thanks to bigmoose, i now have the andy's chassis i'd been looking for. and to make it even better, it's the entire kit. all new, in the original box. :D
shodog, remember when you asked me if andy's made rear arm mounts, and i said i didn't...
Last post
It was sold with all of my other Andy's builds back in 2008 when all my health crap started. Never finished it.
It was shipped to me in a separate box. But it had changed hands a few time, and the address labels stuck to the back of the kit box....
New member here in the Indy area. Mine is a classic I found our childhood cars in the basement story. Got the DS and T2 up and running with updated transmiter/receivers ( They don't have crystals anymore?! ). 25 years later and these are...
Last post
Speaking of the stadium Blitzer, looks like the materials are all plastics. No need to rehydrate as with the nylon on a team associated vintage car, right?
I just restored my RC10 Championship Edition (B Stamp) that has not run since the early 90's
I swapped out most of the parts with matching aluminum, and still have the original parts (some broken)
I did a simple paint job to show off the gold pan....
Last post
Thanks for the clarification! Thats good news for me because all I have is a 6 gear and I can still build a correct representation of the CE.
This is my first RC10 runner and I had a spare Tamiya grasshopper body around. This is how two iconic cars look together :). A nice match?
The gold pan chassis and the grasshopper body actually line up together from the top and side view. I just...
Last post
Hey Dadio, can you post more full buggy pictures of the RC10 Grasshopper design? All these years I have a grasshopper but no RC10 to do the install of your rear suspension stay. When you get a chance, would like to see how it looks.
Were the wheels on the original World's Car fluorescent yellow or standard yellow? In most pictures of original cars, they look like plain yellow, but I'm not sure if that is due to aging. Pictures of the World's Re-Re look fluorescent.
Last post
I have a nib late all black 6037 Worlds kit, and the wheels are neon yellow. However, the shades can and do vary based on how much sunlight they have been exposed to. Here's an example of a few shades of the neon yellow.
Today was exciting. The first batch of iridium carbon fiber parts got cut. This includes BK rear towers for the 93 worlds car (mounting holes still need to be countersunk) as well as a batch of towers for the Losi mini JRX2. I’m sure many of you...
Last post
CustomCarbon, check your pm for a request on cuts.
Looks like the message was deleted. Let me know if need to follow up.
Anyone know what make these are ? Would they have had foams glued to them ? DA6ECC37-7CDE-4189-BB52-0223100EF44D.jpeg
Last post
@MarkyDents, did you ever get tires for these?
I'm trying to get the 5 bean version of these Mini-Mags reproduced, would you mind if I used your excellent pics to show the machinist how it was done? Can I also use your pics for reference in my, RC...
Can someone point me in the right direction as to a good set of snap ring pliers that fit these shocks without modding? I bought a set at Harbor Freight with multiple attachments but non worked for me. Thanks
If these parts ever become available, does anyone know the cost effectiveness of having them anodized to match the classic RC10 gold?
Last post
They have been for sale, the website is sold out now though.
I searched a few times since they had the clear announced and nothing ever showed up. Did they actually have stock? I know I missed the gold re-release parts by a bunch of years, but I...
I acquired a new build buggy from mikea96 several years ago. I was very pleased with his vision, but the purist in me decided to strip it down and make it an AE parts car only. The pic below shows some of the original parts that were sourced. Neon...
Last post
I think we’ve recently spoken about this build🤔 it’s about time this thing gets some love. Nice to see a nice clean build using AE parts sprinkled with some hop up. Excited to see it come together
So I am trying to rebuild an old early model Competition Edition and as I am going through some of the old nylon parts I am finding what looks like little tears where pins and screws have been. Was wondering if this is a common thing with these...
Last post
FanRC parts are great stand ins for original parts, and half the price on those rear arm mounts. Just depends on what your build will be. For a shelf car id go original but for a runner, brand new parts for less money is the way to go.
Hello all! I'm a new member here on this forum, and I'd like to show off 1991 RC10 Team car, all original, built by my father, an older member on here by the username of CharlieDon'tSurf. He build this car for the upcoming 2nd annual Vintage World...
Last post
welcome CharlieDon'tSurfJR!...sorry, just had to. :lol:
Hello, I just purchased my first gold pan restoration project and had a few questions specifically about rebuilding the transmission. I have not cracked it open yet but I have a sneaking suspicion that it was rode hard and put up wet many years ago....
Last post
There's also this option to build a new gearbox with parts that are still in production
Yeah I have run across several companies making reproduction moldings which I think is great especially for those wanting to race these in vintage...
Last night I did a test cut for a Brian Kinwald 93 worlds style rear shock tower as close as I can reasonably get it I think. Let me know what you think.
Last post
This took a lot longer than I wanted, but the 93 Kinwald towers are going on eBay today made from 0.072” iridium carbon. Obviously, these are going to be fairly limited being a niche item, but if you are looking for one, check my eBay store.
Just putting the pics back up of the MMS Schumacher RC10 after it was deleted by the crash, once again thanks to Charles (CNA75) for recommending this forum to me and thanks for all the previous comments. There was a post with some...
Last post
Hi, it was made by mms using the early Schumacher cat running gear, not sure how many Alan sold but we had 3 of them at our club in the late eighties…… the club was YORCC …. York, North Yorkshire ……… sorry no photos, have been looking for one for...
I wanted to share my current RC10 collection in one photo with them all together. Its taken about two years to acquire these buggies and its on going! I've tried to fully restore each one of them to the best of my ability! My goal is to get...
Last post
Is that a Factory Works chassis? Looks good!
Yes, it is! Its pretty good quality too. Thank you!
I'm new to the vintage RC10 platform. My time as a kid was with Tamiya Grasshoppers, Hornets and Frogs. I always wanted a RC10 but the prices were way over our budget.
I was recently re-introduced to the vintage RC world which re-ignited...
Last post
I only mention replacing the bushings because they can stain the white parts and a car with bearings just fits together so much better :wink:
That's a good tip. With the white plastic parts still pretty bright, I want to preserve them as well as...
I finally found a new body for my old oval car and it has sparked my interest again, my car is quite unusual. RC10 based dirt oval cars vary wildly and tend to be scattered on the board so why not start a picture thread of different cars, ideas and...
Last post
Came across this guy. Is this a McAllister conversion?
Also has quite a few Andy's parts as well.
I decided to cracked open my B2-B3 conversion kit but after some heavy breathing and humming and hawing, I decided to leave my B2 alone and not convert it.
So now I've been considering to build up a RC10 B3 from the RC10B2-B3 conversion kit -...
Last post
It will be a runner, I am just waiting for the last part - a battery strap of all things. I could only find the Thundertiger version and it has had to come all the way from Australia.
Does anyone make a super knobby tire like the oroginsl gold pan cars came with? I picked up a couple sets of the new concepts tires, but what are options for super aggressive tires for the RC10….if there are any options that’s. My track in my yard...
Last post
I believe that Tamiya Hornet rear tires will fit on the three piece Jellybean wheels.
To start this off, I would 1st like to congratulate Jay Halsey himself on winning the 1st ever IFMAR OffRoad Worlds in 2WD, and sending the RC10 and RC World into a spiral of evolution that has taken the RC10 to many subsequent World Championships!...
Last post
Love these jay halsey builds I styled my b6.4s with a touch of this styling. Still want to add black front wheels. It’s not as detailed but is a bit of a throwback.
Hi...
First post here... Last night I decided to dig out my rc10 that I purchased and built in 1985. I was in 7th grade and was hooked on rc immediately. I drove and raced this car for several years thereafter. Needless to say time went by and the...
Last post
I’m jealous that you still have your first RC. I sold my first and I would love to have my Rc10gt rtr, but I’ve replaced it in my adulthood with others, but there is something about all the others I’ve had the won’t ever match my first one. Congrats...
With a couple of projects nearing completion I've been collecting parts for another. Finding a nice black chassis seems to be difficult and $$$, so this is another build where I will be taking the long way around again making an equivalent to the...
Last post
It's an upgrade for sure.
Although I have several Tekin esc's and receivers, I agree. Calling them finicky would be mild.
Not to blow past that impeccable and periodly painted paint, but the body itself is really cool. It's kinda wild that IFMAR doesn't allow, say, a vent flap cut into the body unless it is originally molded/part of the body. I remember an A&L body...
Hi and apologies if this has been asked before but I couldn't get anything useful from the search.
When was the first aftermarket Graphite or Carbon chassis released?
I went down a bit of a rabbit hole after making a comment regarding the JJ Ultima...
Last post
Bolink listed graphite material and a chassis in their 1982 catalog, and I'm certain other onroad cars were using it well before that.
Hi all, just wanted to share my blue carbon fiber shock towers I made today for my A stamp car. I think the blue works well with the gold. Also blue is my favorite color so that’s a thing too. Let me know what you think.
Last post
That's a pretty clean looking buggy. What sort of paint job is going with this? The blue is cool but it would be nice to tie it in with some other blue. How thick are your parts? If thicker than OEM, do the ball cups in the steering bell crank area...
I bought a near mint RC10 yesterday. It came with two sets of tires. The set that came in the kit had Associated on the side wall on both the front and rear tires. It appears that these tires have never been used. Are the tires with writing on rare?...
Last post
I bought a near mint RC10 yesterday. It came with two sets of tires. The set that came in the kit had Associated on the side wall on both the front and rear tires. It appears that these tires have never been used. Are the tires with writing on rare?...
I’m trying to restore and/or make correct my RC10 Collection. After reading the 25 years of the RC10 thread it appears I have a Cadillac chassis with Edinger parts. The chassis is the darker gold. It does have the thicker mill front shock tower....
Last post
Some late Edinger parts were packaged in early Cadillac kits. Lots of running production changes, and of course the location change.
First post in this cool forum. My local indoor dirt track is starting a vintage class for gold pans. I would like to revive mine and am wondering what I need to do to my old RC10 CE chassis. I know I need to rebuild the stealth and shocks. Anything...
I figured I would combine this build thread for the two B3's I'm building. I've been on a big B3 kick lately. I have been hunting donor cars and parts for nearly a year.
FT - This is going to be a shelfer fitted with a lot of vintage upgrades and...
Last post
Hey Lavigna - I know this is an old thread but I have questions!
What did you use for these items:
Rear Shock Tower
Battery Hold Down
Ball Ends / Turnbuckles
Did you use the MST ball nuts on front AND rear inside link spots?
What size front tires/wheels did the graphite car come with stock? Want to make sure I’m looking for and buying the right size tires for the stock wheels..
Also if you have a newish pair that will work let me know!!
Thx
Last post
If you don't care about tread patterns, Traxxas still makes a step-pin front and Schumacher has a couple rears.
Some of the re-re Tamiya's might also have options.
Hey all. So my neighbor always sees me messing around with my cars out front and it gave me this old RC10 that he didn't know much about. I'm trying to decide if it makes sense to actually give this thing some love and get it back into good running...
Last post
Did you decide against doing the outdrive bearing mod? That no longer requires the felt seals.
You know .. I totally forgot about that. Going back to remind myself now. Thanks
Hello!
Any difference between MIP RC10 4x4and Ten4?
Is Ten4 still available?
What is the rear transmission on the Ten4? The AE stock 6 gears transmission?
Thanks 🙏
Last post
Most parts are available but the most critical parts from Robinson Racing have a hard time sourcing. Most likely it might not be available. If I have the used piece on hand, I can ask the local shop to custom-made. 7075 and exotic plastic can be...
Admittedly going to be a long while until I get into this one, still working out exactly what I want to do with it. C5A92806-54BD-485C-B3E3-C0C7D9E0EE3A.jpeg 0BA8FDC2-4871-4BA4-BAF1-B6DA66345508.jpeg DB2881C1-9CC4-4534-8453-CF8FA7371D6D.jpeg...
Last post
Are you wrenching on this one still? My interest is piqued. :D
RPM Worlds front springs RCCA 05-1993.JPG
Btw probably the only description I’ve ever seen of the springs short of medium and soft.
was going to tear this thing apart and convert to a dirt oval car but longer i looked at it the more i just dont know...i know for sure all electronics have been upgraded recently inc. motor thats about it on that....
but i noticed some oddities...
Last post
so i ended up finding a already done chassis out of a old bolink super speedway pan car....very nice and alot lighter ...so now thinking list this....but have no idea...seems market is a little crazy on price range for these so will keep doing some...
The CC RPM Worlds was based on the '91 Worlds Stealth buggy that AE developed for the loamy Freedom Hill Park track in Detroit that was hosting the 1991 IFMAR Off-Road Worlds. RPM developed the '91 Worlds front end kit for AE team drivers that...
Last post
The vintage Autographics number decals arrived today. At this point I am calling it done for now. Thanks to all that offered advice and contributed parts to the build. :D
I'm in the middle of building a composite craft/RPM worlds buggy and trying to figure out the best body to use on it. It looks like the ultramolded chassi preference is a losi xx body, but I haven't seen if there is something recommended for the...
Last post
Possibly. I've got other stuff I want to pick up that is higher priority right now.
Parts are finally coming together for my Worlds chassis build. The bulk of the chassis will be aftermarket parts from Composite craft, RPM and Tecnacraft. I just put the finishing touchs on the wheels. Here is a peek.
Last post
Thanks for the compliments guys
So what is the history behind this car? What year worlds were these parts made for? This car is funadamentally different that the worlds car associated released.
Jim, I know you are looking down from above. Hard...
Users browsing this forum: Amazon [Bot], Bing [Bot], Facebook [Bot], jcwrks, Semrush [Bot], Tbot [Bot] and 13 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Amazon [Bot], 
jcwrks,