This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
I'm in the middle of building a composite craft/RPM worlds buggy and trying to figure out the best body to use on it. It looks like the ultramolded chassi preference is a losi xx body, but I haven't seen if there is something recommended for the...
Last post
Possibly. I've got other stuff I want to pick up that is higher priority right now.
Parts are finally coming together for my Worlds chassis build. The bulk of the chassis will be aftermarket parts from Composite craft, RPM and Tecnacraft. I just put the finishing touchs on the wheels. Here is a peek.
Last post
Thanks for the compliments guys
So what is the history behind this car? What year worlds were these parts made for? This car is funadamentally different that the worlds car associated released.
Jim, I know you are looking down from above. Hard...
:? well maybe. i don't have much info on this chassis yet. maybe an andy's prototype :roll: the chassis is drilled for the 6 gear trans and traxxas trx10 (bullit) front bulkhead.
Last post
I see a few TPS Chain Gang guys ran one of the NOVA oval and sprint versions at the 1990 Dirt Oval Nats. I don't recall ever seeing one in person bitd.
Please look closely at the bottom of this RC10. The additional servo and battery mount holes appear to be factory drilled. I say that because the inside of the holes appear to be anodized. Yes some are not countersunk...
Last post
WOW that's it, I wonder how many of these got out into the world. Thanks for your pic and post!
I have a chance to buy what the owner claims is a never run, Edinger RC10 with box and everything with it, motor and electronics still in bags. Only the body had been painted. His pictures support this claim, but wondering if worth the 600 dollar...
I've got a couple of Comical RC10 buggies to build. I'm starting out with the shorty Masami style build.
.
PXL_20230905_143031186~2.jpg
.
A little kickoff to the assembly work.
.
PXL_20230905_160007395~2.jpg
.
PXL_20230905_171439623~3.jpg
Last post
Got some running footage today. I had a guest driver while I fumbled with the recording. :mrgreen:
I also added a skid plate. It comes in handy. :lol:
.
PXL_20231015_200726313.jpg
.
PXL_20231016_181231914~2.jpg
.
The shiny spot in the...
I had always assumed AE just copied Composite Craft's bellcrank design and modified the post to be on top instead of the bottom for the 6037 Worlds Car. However I never knew it was primarily due to Kinwald using the CC bellcranks at the 1993 IFMAR...
Last post
I'm still not sure why the front Wide-Fives were not included in the kit.
There's so much other stuff wrong with the Worlds kit compared to his actual car the tires almost don't matter.
After their domination at the 85 race, what was the race story for Team Associated losing in 1987?
Do we have closeup pictures of what Team Associated raced with? I see that the MIP RC10 placed 4th below...
1987 IFMAR 1:10 Electric Off-Road World...
Last post
Kyosho superior, Associated inferior.
(In his best Soundwave voice.)
:lol: :lol: :lol: :lol: :lol: :lol: :lol:
Sorry Jason, I couldn't help myself.
Well, Kyosho is still popping out vintage cars and AE is not. So in that respect yes.......
Hello, could someone tell me if the RC10 Graphite came with the short or long front arms?? I've looked at pictures and it confused me even more. The reason i aske is that i recently acquired a graphite chassis and would like to piece together my own...
Last post
There was a sort of plated version that flaked off, olive drab, then the powder coated ones you have.
With the trans brace you have, a 6 hole front tower would probably be best. Early stealth trans cars had a 6 gear brace with 2 new holes added for...
I figured the only way to get a coffin chassis RC10 Graphite is to have a replica chassis made. Since I have an extra later model RC10 Graphite in nice condition, it seems like a good option for the making a coffin chassis style buggy.
Disclaimer...
Last post
I decided which one gets the skeleton chassis and 48p Thorp 6 gear setup.
.
PXL_20230921_154526689~2.jpg
.
PXL_20230921_155143944~2.jpg
.
PXL_20230921_155511891~3.jpg
.
PXL_20230921_162536099~2.jpg
Sorry, but I am having trouble searching and trying to find what is needed to upgrade my Early (80’s) RC-10 buggy.
Many upgrades back in the times, sway bars motor etc but never did anything with the wheels and tires.
I would like to know ways to...
Last post
Welcome. If you're looking for aluminum wheels and still have the 1/4 tapered rear axles, these wheels on eBay from Korea are pretty nice.
.
Screenshot_20230919-143033.png
.
I have them on this buggy.
.
PXL_20230919_193321464.jpg
.
They could work...
Hey guys, posting up some pics of a build I have been putting together for a while now. Many of the vets here have helped me source things (thanks to you all). Here are some pics, hope you enjoy.
Last post
its been a blast building, thanks to everyone for you help and imput.
This was the first RC10GX (NIB) I ever saw auctioned off in Japan. It is the earliest version of the RC10-GX. The main difference between this and the US spec is the inclusion of Yokomo aluminum wheel adaptors for Yokomo 2.15 inch rear wheels, extra...
Last post
How about it’s only a box of spares if it ain’t built.
Only reason I buy anything nib is to build it myself otherwise what’s the point
That's the great thing about this hobby. Some collect sealed kits, some have open box but unbuilt, some build...
Hi there ....
I am a New member from germany, building a New RC10 with JC suspension parts.
Got a New tub, stealth is like New.
Run the donation car at the last Euro Masters in GB together with Mr Drescher in the A Main ....
Looking forward to a...
Last post
Yes, B6 shocks with internal limiters ....
Raced it in dirt with Jconcepts tires, went awesome and was very nice to drive.
13,5 Motor, no issues with slipper/stealth unit.
I present to you my freshly built Team Associated RC10FX. This model was released in Japan only and is essentially an RC10 Championship Edition with a few extra parts not included with the American (and everywhere else except Japan)...
Last post
Since it's the future and photos can now be translated...
It's been a while since I built an RC10. So I figured it was finally time to open a NIP Lightz oval conversion I've had for many years.
There's nothing fancy on this one and I built it as more of a gearbox club racer.
I will come back and update this thread in a few weeks. But for now, I just want to show it off for guys that donated parts to the project. This is where your stuff went. If you know the back story, please keep it to yourself for now. I'll explain...
In looking for a couple of sets of Hazard wheels, all I can find available anywhere (including manufacturer's site) is yellow, and a few sites I have been to are listing the white and black versions as Discontinued. Anyone know for sure if they are...
Last post
It looks like the yellow Hazzard wheels are available directly from JConcepts.
I picked this car up a couple years ago now exactly as you see it. Well actually it’s probably a little dirtier now from just sitting on a shelf in the garage.
Since there’s not too many AE parts on this one I figured we could all have a little fun...
Last post
That swiss cheesed transmission brace is trick. Slightly stiffer than a wet piece of cardboard!
Don't worry, I have not forgoten the 1993 Kinwald replica, but due to some difficulties with the right Carbon fiber plate of the rear tower, and about the machined motor plate, I work on some extra project until...
Last post
I am in the process of reassembling this car. I have absolutely everything, except this famous part. Do you know if anyone has tried to reproduce it in 3D printing?
Intro & Background
Hello everyone - I'm new here (as you can probably tell) so forgive me if I commit any infractions to unspoken rules. I read the forum rules and I think I've got everything down correctly.
I got a set of rims like what Jay Halsey used on his 1985 IFMAR winning buggy. What bearings or bearing inserts did he use? Does anyone have a link to where I can get what I will need?
Also, does anyone have a lead on the right tires for...
Where to begin... After acquiring parts for different projects and changing directions midway this buggy finally took form. After seeing scraps b1.5 build awhile ago i always wanted to build something similar if i ever came across a t2 for a doner....
Last post
So many possible ways to be creative on this, I created a t2 chassis equipped buggy once but I did it by taking a worlds car rere and introducing the t2 chassis to it. Looked slick with all the team car white plastics with the more modern tub. Ended...
Has anyone managed to paint associated shocks with good results to refresh them or change colors ?
In the process of putting together a RC10 stealth 91 replica I have to get many parts from the rc10T.
I found some in my area but the...
Last post
For something sitting on the shelf, paint works fine. Otherwise, as scr8p said, you can find most standard shock stuff still around.
It won't be immediate but with a little patience you will find what you need.
Sassy Chassis ad's were plentiful in RCCA starting in 1990. I figured that I would try to source a standard RC10 chassis as the base for an all new hopped up build. There are only a couple of AE factory pieces such as the tranny brace, ball cups,...
Last post
Dats a whole lota rare nip parts your working with, this things gunna be pretty sweet 8)
Those Trinity shocks are neeeew !
Sometimes I feel like the hunt for nip parts is just as exciting as the actual build. I also get a sense of enjoyment from...
I finally have my holiest of grails, thanks to Asa. :wink:
And to think, I nearly parted this car out and sold it out of frustration of not being able to find my Aero-foil. I'm still not sure if I'm 100% settled on the Worlds chassis, or if I...
Last post
I figured this thread deserved a 15 year bump. :mrgreen:
Do you notice any handling differences between the RC10 graphite team car and the RC10 team car with tub chassis (both fitted with white nylon parts throughout)?
I haven't driven either yet. Been a while...greetings all :)
Last post
I would say the tub chassis has more flex and probably a lot bigger sweet spot for setup
What aftermarket tires (front and rear) will fit the original stock rims? I believe the Kyosho Sand Super tires will but want to confirm and see if any others fit. Thanks a bunch...
Last post
Hi All,
What aftermarket tires (front and rear) will fit the original stock rims? I believe the Kyosho Sand Super tires will but want to confirm and see if any others fit. Thanks a bunch...
Years ago I got my built in 1989 JRX2 off ebay. All it said was new built in 1989 never ran, with like two blurry dark pics of a car and box. The price I paid was either a steal or gamble. When it showed up new as could be with original sales...
I'm pretty new to the forum, at least this is my first thread.
I recently scored this RC10, that I believe is an Edinger from the mold of the gear cover and the stamp on the chassis.
It's in a great shape, besides a few scratches on the...
Last post
Wow that cleaned up nicely. Congrats on the find I have a couple I’ve found but they all had the chassis drilled
Hi All,
I searched the forum first so if I missed it, please post the link...
I am rebuilding an original RC10 and building a B6 (going for a retro look). I would like to get both anodized in the original Associated gold. Where might I be able to...
Last post
I used oven cleaner in the past to remove existing anodizing but this was years ago, I'm not sure if the cleaners are the same as they were back then..
You want the yellow can. Real Easy-Off seems better than the off brands but definitely has a...
Just got inspired by some threads on the Tekin conversion to post an old build. As per usual I had collected parts for a long time and wanted to build a mid motor conversion for vintage racing on modern carpet tracks. In 2014 I was ready to assemble...
Last post
.... I hit the wall with the same frequency and force with or without it.
My original body has seen better days and I'd like to get either a new OEM body or maybe an aftermarket that fits my 1989 RC10 Graphite. Anyone know what the name/part # is for the original body & wing that came with it? I keep reading about the...
Hey guys! Years ago, I built an RC10 with the A&L C2 chassis set. I originally put a ProTech II on it with the rear of the body going over the top of the shock tower. I thought the body looked too high so I trimmed the back off to lower the body. It...
A few years ago, I picked up not less than 3 early Edinger RC10 rollers in various shape and more or less complete so as to complete my Box Art RC10 project ( There were two A-stamp chassies and one non stamped one. The left-overs have been sitting...
Last post
Killer to see this. Came out absolutely perfect! I love Funco/Rough Rider bodies on rc10s. Always will.
Huge shoutout to Larry Doe for all of this help in making this replica as accurate as possible. Still need to add the IFMAR tech decals, number plate and chassis protector but she's 99% of the way there.
Hey guys. I've been updating some of my RC10s. Also, I moved to a new, bigger house back in early 2021. This means that I've been able to organize all of my cars and parts. I've found that I had lots of stuff squirreled away including plenty of RC10...
Last post
Also, I moved to a new, bigger house back in early 2021. This means that I've been able to organize all of my cars and parts.
Picked this one up today. This is my brother's original RC10 from the 80's. It started life as an original A stamped gold pan, but he modified it with the long arms and longer shocks in the front along with new arms in the rear. After sitting for...
Last post
That losi definitely looks a bit sad, looks to be the bones of a pro with some randomness on it, rare to see one with a mechanical fire starter on it :)
Good day, folks...another question to pose, where I couldn't find an answer previously posted.
I'm (mostly) rebuilding my A-stamp, with the early gold shocks...the era when they only had a hard nylon washer to seal the caps to the bodies. I've got...
Last post
For the cap seal I've used 13 mm OD 1mm thick O-ring. When tightening you first need to smear the o-ring with shock oil and not to overtight. For the bottom seals I used Traxxas 2362 kit. These were the shocks of my 1986 car, and I ran a full day...
I dont know if I will follow through on this or if it is just a 3d modeling exercise, but I have been modeling RC10 parts and trying to translate them to 1/16 scale. I do not have any front arms anymore apparently so I had to find some parts on...
Last post
i apologize, all the modeling between this and the losi mini kinda burnt me out. the big issue i had working up a trans was finding a diff small enough to not raise the outputs too high above the chassis, was like dropping a gt diff in an original...
Not much of a build thread as its almost complete few decals to find and apply
Wasn't really sure which way to go with this (replica wise) as there was only 5 of them with very few pictures as AE wasn't keen on photos being taken.
This is one of my current projects, coming along nicely I think but not yet finished.
I would like to use an RPM transmission case, but that will require some work on the housing to make it fit....
Last post
How did these compare to the tubs and graphite chassis on the racetrack?
Really depended on the track...the buggy was designed off of the associated worlds version and was well suited for rough and loose tracks common at that time. I raced for RPM...
I've purchased Customworks titanium turnbuckles many times in the past and they appear repackaged Lunsford. I swear we've had this discussion here in the past. OR, I'm just getting old and not remembering. I bought more titanium turnbuckles from...
Last post
Just came across these which might be them.
Looks like a good alternative to Lunsford.
I like Acer stuff. Just note that the turnbuckles are priced individually, not as a set.
And some of their stuff is cheaper on their Ebay store,...
I am officially an RC10 owner. What better first car than this beauty. I just received.
Vintage Team Associated RC10 Gold Pan RPM ULTRA MOLD.
Has stealth transmission and Losi HydroDrive.
Period correct tekin ESC and unknown brushed motor.
MIP...
Last post
As of last year…
“Yes,we do still have both the silver and yellow springs. The springs are $5 per pair (either color choice), plus $5 shipping for up to 10 pairs shipped anywhere in the USA.”
“We are offering those motor plates for $10 each, plus...
So I'm in the middle of restoring an RC10 B3. It was only lightly run up to this point, but has a mix of parts from other cars. A lot of B2 parts, and shocks from a B4.
Compress_20230430_150032_2331.jpg...
Last post
Pretty much got this car wrapped up. It's all original team car stuff except the RPM front bumper, rear bumper, gear cover, and the Lunsford turnbuckles. Oh, and I opted for the factory team gold shock shafts. I took it out and ran it a bit, and...
Users browsing this forum: Amazon [Bot], Google [Bot] and 9 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Amazon [Bot],