This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
Winter time means getting the back burner projects done. This was one for me.
Got the car about a year back. Came to me very dirty, but in good condition. Everything was dyed before I got it so.... The front shock tower was busted, so I placed an...
Last post
The narrow RPM RC10 arms in black are still available, so they are not too rare. They are if they were white however. Anyway, they are not the same as the ones on this car. These are wider and are designed to be mounted more inboard in the rear and...
So im so happy to have some of these i saw the edge of them in a picture of a lot of rc stuff and took a gamble. Well i got them and i was sure happy to see they were advance wheels and even better there were two complete sets the other has slicks....
Last post
yes.... those are sweet.... just like the ones i had...had...had.... except they were for a rc10...i scanned a old advance ad in the scanned section...
I Have been working on a RC10 runner and have ran into a bit of a problem. The only steering bell cranks I have are off my RC10 graphite and they are all metal w/ball bearings:
rc10.JPG
Well the runner i'm building is a gold tub with an original...
I have had this car so long it has spider webs on it :? , thought it might be time to freshen it up a bit :D 1 a1 worlds 002.jpg 1 a1 worlds 003.jpg 1 a1 worlds 004.jpg
I'm going to try to use this car to get my juices flowing toward building the...
Well as if i dont have enough builds i got bored waiting on some stuff so i got started on another :roll: Just finished sanding and repainting the chassis and got the front end together not sure what direction this one is going any suggestions?
Last post
did you buy that bulkhead from me? i had one, but don't remember who i sold it to.
First off, I wanna say thanks to everyone on this forum. I cannot believe how many folks still are putting their blood, sweat and tears and MONEY into this awesome car. The amount of knowledge here is overwhelming and much...
Last post
Welcome aboard! You've been bitten by the RC10 bugs and you're definitely not the first person!!! :mrgreen: Post some pics when done buddy.
well after getting started on my wife's rc10 runner and racer builds and my son's rc10 project i figured i would get started on one for myself. this car is being built as a tribute of the rc10 i raced bitd. some of the things i am doing to this one...
Last post
Pink and neon colors mixed together, Isnt that what the 80's were all about. :D
I tried a search on this forum and didn't find what I was looking for, so I'm sorry if this has been asked before but... I had a website bookmarked that sold metal a-arms and rims for the rc10. I think it was a dirt oval type website...i can't...
Hi everyone, :mrgreen:
Heres a little winter project I started working on. I know you all have probably seen lots of these, LOL but its my first resto project. :D Sorry I don't really have any before pics, but trust me the car was pretty nasty....
Last post
Body just came in. :mrgreen: Just waiting on the wing and wire now. Then its off to paint.
A shot next to my B4
And I wonder if I can get a hybrid this way...hmmmmm
Wanted to get back into rc's. My son is old enough to work on them and i can use that as a excuse to buy some fun toys. Was looking around and found a guy locally who had a fleet of buggies and a huge toolbox full of parts and 6 racing motors. A box...
Last post
I can tell you how many times I pull up craigslist and wish that I find something like this. This is a find well worth what you paid for! Congrats
While its not complete, I still cant believe i got this for $70 shipped.
Its missing rear wheels and tires, battery strap, and body.
I have a battery strap NIP, and a set of rear wheels and tires that will work.
The body I will have to get a Mirage...
Last post
The deals on these vintage cars definitely is getting to be a rarity, so it makes you excited when you do come across a deal.
hi guys
i couldnt imagine at 10.000 miles from me people r discussing about my rc10.
A guy from this forum, was so kind , and he contacted me...i still dont know how he find my email, anyway we talked about our long story on rc10s and i decided to...
Last post
Great pics and post! Welcome and we look forward to you sharing your other imagineering projects.
I got this is a trade from matthew john(Thanks Matt!). I just got back from Hawaii and don't have to go to work until Monday so I'm starting the tear down for resto. It's kind of rough but I think it has potential, besides, I love a challenge! I...
Last post
Rick, I always wanted one of these back in the day but couldn't afford it. I was buying diapers instead. :?
me to I traded something for it I worked in a hobby shop and people would just give you cars when they were up gradeing and tradeing them to...
So I found may self in a very interesting and introspective position over the last few nights. My daughter's birthday is coming up (she will be six on the 12th), and she asked me for an RC car. Quite surprised I told her she could have one, but she...
Last post
My daughter has a Grasshopper, Frog, Slash and a Lunchbox kit. She's actually the reason I got back into r/c in 2006. She saw the Grasshopper and RC10 (and others) in a box at my folks' house and she asked what they were... so much to my wife's...
hi all
after waiting two weeks it came ad of course all other projects got scapped to one side but after a couple of hours i thought i would read the instuction :lol: thats was vauge and the pics were no help but i kinda new that as ive been doing...
Last post
Here is an explanatory pic, you can see more pics of it in my collection thread here:
Hey everyone, new guy to the forum. I, like alot of others on this forum found 'the box of parts' from my youth in the basement.
Needless to say I am doing a resto-mod on a gold pan rc-10. The pan was pretty beat so I painted it black and used...
Last post
I would go with a larger spur and a smaller pinion, specially if you are bashing. something like a 87/20, or lower pinion specially if you are using a 6 gear trany.
First off, I'd like to say hi to everyone! I'm new to RC cars in general & just got my first RC10. I have some questions about it that hopefully y'all can help me out with. I got a gold pan in a trade recently that I was going to sell, but after...
Last post
LOL, yeah the zip tie cracked me up. I need to find a battery cup & fix the front spindle/hub assembly before I can toy around with it too much. I don't think I will make it original, it's pretty scratched up so I just want to use it as a toy.
My fun restoration and sale of an old RC10.
Airtronics radio/servo, Trinity Joel Johnson signature motor.
Lots of cleaning and rebuilding done to it. A couple parts missing, but no biggie.
yummy!
That box below is supposed to be a youtube...
Last post
Oh it's gone, I was just showing off the pics and vid I used to sell it on rctech.
I'm been looking on here to see if anyone is running a new age/style body and wing on there rc10 and didn't find any. so if you are or have, please post a pic and what the body was for.
thanks
Last post
This is aeiou car.
You can probable find some more if you browse around. :)
WOW that was a lot of reading :shock: what a clean build!!!
thanks for the link
been thinkin of doin this for a long time...nothing fancy just a rc10t with buggy body and maybe buggy wheels and tires.... i wanted some ideas...like how to go about mounting (front body mount)a buggy body,what wheels to run.... plus did anyone try...
I was wandering if anyone in this forum has any info on this car. Found it on an Italian Forum but I don’t speak Italian. If anyone know any Italian and has some time to help, I would love to see some more picture of the car with out the body.
I've wanted to build one of these for a long time, I even went as far as to buy the arms from Dynotech a couple years ago, and then sold them to a member on here. Anyway, I decided this time around that there's going to be some follow through with...
Last post
That would make a nice donor for rcbonezzzzzz. :lol:
I may have an opportunity to get chassis parts reproduced with a CNC machines. For example I have a sassy chassis as a model that could be modified by adding stealth tranny mounting holes and possibly a bend along the side edges to reduce...
Another project I recently picked up. Came with MIP trans, unknown graphite chassis (MIP?) Andy's short front arms, Andy's rear arms, and mics other parts.
I have some long Andy's front arms to use, polished SS universals, as well as Houge steering...
Last post
Well...the Optima Mid could use bearings in the trans and hubs, as it has bushings. One half of the front bulkhead is damaged, so need one of those, as well as wheels/tires and a body.
Overall though, it's in good shape....started cleaniong and...
Well what can i say santa came a bit late for me but he got here in the end i just won it on fee bay something ive craved for a long time i hope it gets here quick
My question is what do i need to get her running apart from the obious wheels...
Last post
most of the parts are readily available from tower or ebay
well I have a few things left tell i can run my gold pan :twisted: :twisted: here is my question
what spur and pinion ratio should I run? here is my setup 6 gear trans, ruby 16 turn brushed, novak fusion, 2200mh battery
a link would be awesome...
Last post
The six gear trans is a fairly high ratio and that is a relatively low turn motor compared to what was regularly used in that era. I would start with the smallest pinion/largest spur you can fit, especially if you are using modern tires which are a...
so, here is my first post on this forum... If there is somewhere to intrroduce myself, just let me know ;)
I recently fell in love with the carbon fiber tub Fiber Lyte makes for the RC10. So I had to get a RC10... I had seen this car on...
Last post
Hi Matteo!
It's pretty nice indeed. I didn't want a worn car for this build as I want to make a shelfer from her... The plans are a Fibrelyte chassis and damper mounts, titanium turnbuckles, alloy wheels, a nice body (Proline if I can source...
I just finished an RC10 runner and I'm in need of a set of tires. And since I love the look, I wanted to know if any tires are currently available that look similar to the TQ20 rear and TQ70 front pyramid spikes?
Hello everyone,
I am intersted in building an RC10 Hot Trick Stuff shelfer.
I wanted to pose the question which is better for this build.
Original white plastic parts or black plastic parts?
Which would hold more value?
Transmissions? Belt,...
Last post
Here is a pic of one of mine.
Composite Craft front nose. I forgot what are the special clips to hold the pins?? settin03 of ebay RC10 Hot Trick .jpg
I recently dug my old RC10s out of the basement and have put one together. I have a new battery and a new engine that I bought myself for christmas.
I am using an old novak receiver and an old novak T1 speed controller. The new engine is a trinity...
Last post
Just start fresh on your solder connections. You probably have a cold joint that is limiting the transfers of power and overloading the esc. Make sure you are using good solder (ie. deans) with flux and a hot iron. I my experiences, this should...
Hello.
Ok i won this car as i always wanted one was not to worried of its condition as its going to be a runner.
After some realy helpfull coments on Oople i now think i might have a team car,witch is what ive always wanted.
Any way i will put some...
Last post
Ok iam giving up on the shell and going to buy a new one,lol.
Its quiet beat up also and the wing is in a poor state,but put it all together just to show the end product.
Ive got the bug now iam now looking a graphite one.
Thanks all.
Leon
Hello all, this is my 1st post on here. so here is goes I'm not new to rc's (I have 2 hpi bajas had lots of nitros and electric), my 1st rc was a rc10 gold pan and rc10t years ago (80's and 90s). I just picked up a rc10 gold pan and missing a couple...
Last post
going look at them now. guess i should have done that 1st :?
Today one of my friends was talking about replacing his RC10's chewed up transmission with a metal geared Traxxas Magnum 272. :shock: :roll: He likes to run his RC10.... a lot, and would like the convenience of going to the lhs to get parts instead...
Last post
Thats a lot of wrk doin up that list of parts from LowclassCC :shock: :shock:
im going to attemp a homemade aluminum wing for my rc10...cause i cant find 1 to buy anywhere..i cant even find any pics....can you guys please show some pics of your aluminum wings? or a aluminum wing?
thanks 8)
Last post
OK , so i got messing about and managed to bang out a prototype wing based on a few pictures I found on this forum , One thing is for certain, it looks way easier than it truly is, mind you , other than a corded drill i did everything by hand, I...
Hey guys, I'm new around here. I just picked up an RC10 for a project off of ebay a week or so ago and found this web site as a result. I am excited to find such a large group of people who are still into old RC10s. I have been in and out of the...
Last post
Welcome Matt. I dig the mechanical speed controller. Reminds me a lot of my first rc10. There are a great bunch of guys here that will help you with any issues or parts you might need. I say build the car exactly as you want it. I have a couple very...
okay i have a few questions. the edinger and caddilac gold pans have a few different parts.
the caddilac gold pans came in boxes that had the caddilac address, some still came in edinger boxes, but is the picture on the box the same? also the...
Last post
Reply with quote
Post Re: RC10 Newbie
For me by far the easiest and most successful way I have found to search the forum is to use Google's advanced search option as shown below.
Attachment:
Enter in the Search within a site or domain: box and...
So I picked up a buggy about a month ago and then got slammed with work. Last week I finally had some time to start tinkering with it. It had a spur gear with a million teath on it and I wanted something a little better for all around use. So, I...
Last post
HEY GUYS sorry for repeating this but I hit the send befor I was ready and found a couple of mistakes . YUP even your OLD Rustbucket screw up .;-)
Hello. OK IF nothing works after you do what has been sudjusted I have a feeling what may be going...
Hi all :)
Today I finally got my first set of T-crafts all the way from Sweden. Have been wanting a set of these beauties for a while and I have given up hope 1000 times when a friend in snowy Sweden told me that he had a set for sale - I don´t...
Last post
:shock: WOW, your stuff always looks good, but those tecna's make it look sweet :wink:
Still assembling parts for my team car, and really like the looks of the graphite with the blue anodized parts, I found some blue anodized shock bodies for the GT I think but I don't know if these are the same size as the hard anodized that came on...
Last post
I have a couple of blue shocks if ya need 2 more 3.25 eye to eye. JohnnySr.
okay, I'm hoping I get lucky with this one. I've been wavering the last couple days looking at this one. Not sure if it's a real deal '93 worlds or not, seems to have the right bits. I'm really hoping that the tub is as clean as it looks in the...
after seeing some pretty cool beatle on this and TC i have been bitten by the bug (lame i know but the crime would be not to use the pun) so i polished up a hole ridden pan with a hot trick wide front end grafted in a kyosho lazer trans half a...
Last post
good idea to put a mid-motor transmission on the short wheelbase: should help to keep the front tires in touch with the ground.
If you can : flip the servo over and mount the ESC across from it. That's a heavy piece you'd rather keep low in the...
I am starting my second project this one is a graphite team car I got off ebay. My first was my old gold tube that I rebuilt for my sons birthday. My questions are back in the day I replaced my stock RC10 shocks with kyosho gold shocks because of...
Last post
E-clips are 1/8 .....easy to find at any hardware store.
Hello fellas....new guy here at the forums, I hope this is an OK place to post an intro...cool site! Brings back alot of fond memories from my racing days.
A little about me...I'm 36, live in WA and getting back into RC pretty hard. I'm a mechanic,...
Last post
Some progress.....body painted and mounted, still need a wing.
Swapped out the motorplate for a black LiteSink, hope to locate a blue one one of these days.
Also need to find proper rear tires and install one of the Revtechs I recently scored....
Users browsing this forum: Google Adsense [Bot], jcwrks and 14 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum