RC10Talk - The Net's Largest Vintage R/C Community

I have built mostly buggies. Recently i finished building rc10gt electric conv and rc10 t. I have heard of the axles breaking whether dogbone or cvd. I am trying to find out if there are any other options without doing some extreme overhaul . Thank...

I had some old rc10gt and some NIB parts and am building a race worthy GT “factory team”
My local track is going to run gas truck class.

Going to run a new OS CZZ engine with MIP 4in1 clutch, associated tuned pipe, Robinson metal diff gear, V2...

Looking to start restoring an old rc10gt and trying to figure out the wheels.

- Where can I find original style wheels with 3/16 pin-axle rear and bearing-type fronts?

If I want to convert to 12mm:

- Is there a way I can I use original rc10gt...

Came across this truck for $40.00 as is and couldn't pass it up. The guy I got it from said it had been sitting for a few years in his garage but it was a strong runner. It is pretty dirty and will need a full break down and rebuild. My son got the...

Need a little help with a body ID. Kinda looks like an RC10GT body......but I don't know for sure. My bet is associated, but 100% sure. Thanks for the help.

David

So I have a proline truck conversion that I’ve mounted onto an Andy’s trailing arm car and need to find a nice factory looking way of mounting the body

As most of you will know most of the conversions use a front body mount that attaches via the...

Here is my original RC10T purchased when they were first released. Its been hanging on the wall in the garage for years waiting for a restoration. Only two things I had to replace were a rear limkage and body mount. Don't tell anyone but the rear...

There must be a way to Convert RC10T to take Hex Wheel & Tires.

Does anyone have any information on that.

Thanks in advance.

So I came upon a great deal on a RC10GT, which in was planning on cleaning, getting running, and selling. After long and deliberate consideration (about 15 minutes after I got home with it), I decided to keep it. Seeing as how there's really nowhere...

On the nitro versions of trucks,
I cant claim to have the mental dexterity to keep each model clear in my head but im guessing you cats savvy to them will know what im babbling about, and set me straight.

Ill grab pictures of the blue when im out...

So while digging through some of the bodies I have I came across this. It's a Dean's body for the Associated RC10GT, which normally is nothing all that special but on the tag is a stamp that says it's a pre-production sample . Do these normally get...

uABXllr04OM

I picked up two RC10T Team Trucks last year and used all of the best parts from them.
Did the hydrogen peroxide treatment on the white plastics.
One truck came with a new, unpainted body :P
This is the first body I've airbrushed.
No mods, just...

Hello there RC10 Talk world.

I have been racing them for about 20 years but I am new to restoring RC Cars! This is going to be my first crack at this and rightfully so, I chose the first race kit I ever built. The RC10T.

I originally learned of...

RC10.jpg

Good morning all,
I am far from any expert on RC cars. I purchased this about a decade or so ago and i ran it a good bit. It sat for several years, the other day i got it back out and its got issues. 1. Battery chargers, steering works...

Was wondering if anyone has run DuraTrax Sixpack MT 2.8 Mounted Truck Tires 2WD C2 on a RC10T4?

My questions, if so:
do I get the 2.8 or the 2.2 and I heard you should have a half inch offset on these, so does that mean a half inch offset on the...

Hi folks,

I'm looking to restore an old RC10GT and looking for help identifying which model it is. It's a blue chassis model with blue metal nose brace rods, black topped fuel tank. The front shock tower has RC10GT stamped on it and I can't find...

Here’s a cool kit that I got from Factory Works. Special thanks to Jeff for making it in red for me.
27E9FDA4-D3FB-4143-A7F9-F5BB78F6553C.jpeg
28B80CFC-0A32-4207-96AF-CA68C31C299F.jpeg
39E661CC-CD52-42CB-8BFB-DC27252E40A5.jpeg...

Today I pulled out my T2 that I bought in '96 after working and saving a long time as a teen. And that is my one and all jewel RC car. It hasn't been run a lot. The last time was in 2009. Since then it has a kind of shelf queen status.
Out of...

Years ago I picked up one blue shock body - somehow, somewhere

on seeing the color schemed posts on this forum, I got inspired to add some blue to my son's buggy -- wel, you know how that goes... -everything blue!

Anyway one of these past late...

Hi Everyone,

After being away from RC for about 25yrs, I am returning to the addiction :twisted: I recently purchased a RC10GT that I have always wanted as a kid, but could never afford one. I have no experience with nitro, but I am fairly up to...

Here is my ‘other’ stadium truck entry for VONATs...an RC10T Team Truck.

Hi,

I have a 10T back from 1994. It's sat on the shelf for a while and then my daughter got interested in cars and thought this would be a great teacher car.
I do a simple warm up with the truck (nothing aggressive) and I broke a rear dogbone (it's...

Does anyone have a template for the top deck / plate on the duratrax nitro rc10 kit ?

My truck has a piece of sheet metal that's been cut out and doesn't look pretty.

Also on these conversions, was everyone running stock rc10 T bodies ?...

Well SC10 and B4.2 front hex stuff is just as rare and expensive today as anything. What are options for available wheels these days. Seems various front stock (7842) is out there for non nex conversion but nothing really available for rear.

1/4...

I may have access to one of these that is in really good condition but I doubt the engine is usable. It seems that this chassis shape would hinder an E-conversion. But I also have a spare RC10 original buggy chassis. Does it make sense to combine...

As some of you already know, I’ve own many many Team Associated Buggies and Trucks, and although, I owned a B2 converted into a T3, I’ve never owned an actual T3, until now....

Seeing that Jconcepts re-released the T3 body, I desperately needed a...

This is Adam's other rig that dominated the vonats, and is still in use. his t2 is close to stock just like his b2 buggy. very little done, kept simple, and used minimal modifications to make the truck drivable and durable as possible. great tips if...

local hobby shop called me up a few weeks ago and said get up here we have some old rc trucks for you
showed up and was greeted with a custom all metal clodbuster , losi jrxt , and this old n crusty narrow front rc10 t...

Hello. I have an RC10T I purchased maybe 6 years ago and sparingly used in the driveway and things like that. My daughter now has an interest so I just purchased a new lipo battery and we went out to try it. It’s an rtr truck with the controller...

What is the inside dimensions on a factory team RC10T3 box? Reason why I ask is I have a T3 original FT box on its way to me and need to know if my assembled T3 will fit in it. It’s been a very long time since I had any original boxes for the 10T,...

This is my second purple RC10T build. However I bought this truck instead of building it from parts. It was a very nice build, but I still gave it a full rebuild to bring it up to my standards.

I changed out much of the hardware, ballstuds, arms,...

I seem to remember a thread about installing a gear diff from a current Associated buggy into the RC10GT transmission? But I can’t seem to find the thread. Anyone know about this? Thanks

Hi everyone, a neighbor down the street gave me her son's RC10T from when we was a teenager in the 90s. Complete with box (says model 7011) and manual and 75mhz controller.

I put fresh batteries in it (7.2v 5000aH and replaced AA duracells that...

What is the difference between the original stealth tranny and the T2/T3 tranny? I have been told it’s the gear case and the diff gear? Is that the same as a Losi XXX-T too?

I posted a couple years ago about having some issues with my RC10GT that I converted to brushless. It just would not put the power down. I drive mostly on the street just fooling around and that ball diff would inevitably chirp and get gritty after...

There's a guy here selling an RC10GT front and rear (but nothing else).
The front end looks complete, mounted on front plate and including steering, suspension, shocks, shock towers and wheels, etc.
The rear includes suspension, shocks, stealth...

Has anyone had a Rc10 with a buggy body? I remember seeing a pic of one in the forums but I cant find it again. If so what pieces are needed?

Anybody ever seen a T2 with a dark blue anodized tub? I recently came across one for sale that's stated to have been bought from a former factory driver. The truck looks super clean, but it's got what appears to be a dark blue anodized tub in the...

I was wondering what T4 parts, if any, will fit a T3.

Hi this is my first time on any forum!

I did a trade the other day for an Rc10t3 on Craigslist. I got the truck and it is in pretty good condition. The only problem is that it says Reedy special edition on the box and if you try to look it up its...

0376_1-e1569601014967.jpg

I've just got a rather battered and unloved, though complete, T3 Factory Team.
As is the way, I can't leave it as is so I've ordered an XL chassis for it and a few suspension parts to freshen it up.
Has anyone run the two lengths of chassis on astro...

Well, I guess my first build restore thread will be this 7011 series sport truck to replace the void filled by my original Team truck I stupidly sold in the late '90's. TTRU (Team Truck Replacement Unit) came from fleabay and I may have paid a...

New project in the works going carbon fiber chassis, towers and batt strap. Aluminum/titanium hardware will be used throughout, threaded FT shocks will be used also. Body has been chosen which I will unveil soon as the rolling chassis is complete...