RC10Talk - The Net's Largest Vintage R/C Community

Finally got a chance to start my 10T rebuild. Everything cleaned and started to reassemble. I added new RPM front bumper and nose plate. I have new tires and wheel, new team shocks and new RPM arms on the way. I think im going to add an RPM tranny...

After looking for some time now, I finally came up on some RC10T's:

10Ts2.JPG

10ts.JPG

Not too much to look at right now. One has 4 extra holes drilled in it for the servo :roll: That's gonna be the runner. The other chassis is scratched up...

So are the RC10T and GT noseplates the same?

Hello,

I just picked up a pretty good condition RC10T. Couple of questions....

1. ( Front Wheels ) Wiil modern wheels work on orig axles?

2. ( Rear Wheels ) Same question.....

3. ( Rear Axles ) Can the CVD's from a RC10 GT fit, and if so will...

New to the site. Restoring three three RC10T's to original and one to play with. Can anyone tell me will RC10GT shocks fit the RC10T? Also, what aftermarket or current bodies are easily modified to fit the RC10T?

Any advice as to what parts swap...

Well finally had the weekend to play with it, and yes nothing compares to Lipo so much more power. Just forgot to respect the power, in the front yard hauling @$$ and then I try to pull a 180 and just goes 90 instead radio loses signal and goes full...

RCCA has a preview of the new factory team SC10 kit. It has new shocks, threaded on the bottom, and now come standard with the bleeder caps.

I just got this off craigslist and it came with 3 controllers and tons of extra tires, servos, 3 motors, and 100s of parts for $100. I am new to the hobby so I am sure I will have questions about it. This seems like a very good forum :D

Hi everyone
I am new in the forum need advise pl
just buy from Tower the RPM RC10T Stealth 2.25:1 convertion.
a dont find new parts for it.
Do you have a list of parts or a place to buy them from.

Thenks Miki

New to forum and looking for what and what manufacturers aftermarket aluminum parts will readily fit the RC10T with minimal modifications? A-arms, shock towers, castors etc?

Any help is greatly appreciated.

I got those long time ago with a RC10T. Does someone know who made these wheels? Thay have slicks mounted on them...

My 10t keeps getting dirt in the pinion and spur gear and chews up the gears I sealed the cover with silicone and that didn't help anyone have this problem or a fix?

I just got this beauty from jdensison75 in a trade, thanks Joel! This truck was obviously someone's baby and if I had to guess I'd say it's been run very little if at all. I assume that the anodizing was also done by the previous owner. The truck is...

Does anyone know were a parts list can be found? I have been looking for one and havent had any luck.

Thanks

Well I got bored and never had the heart to throw this truck out. I have had this for 14 years and am now going to get it running again. I have cleaned all the parts and found some parts I needed. The stealth trans has been rebuilt, new RPM a-arms...

If you have a T3 laying around and want a cool project try this. I saw a few people talking about it on another forum and jumped in on it and this is what we came up with.

hY7z93z5lkg&feature

The NW shortcourse is set for May 15th in Pasco Wash. The event seems to have an issue regarding hybrid trucks ---My sc10t is not allowed to race the event...(I WAS ONLY GOING TO RACE HER IN MOD) that also means any xxxt lxt schumacher traxxus cust...

So i just got a set of mip cvds from a t3 and realized there is no axle pin where the wheel attaches too. None of the pins i have fit, which pins do I use???

Hey all...Yes,I am alive (at least I think I am) and (reasonably) well. :roll:

Anyway...I just traded a touring car I had laying around for this Associated Monster GT.
The guy I'm getting it off has no idea about anything regarding it...Can anyone...

You guys see the new 18th scale truck?

Has anyone ever compared the two?

Justin

Sometime in late '91 or early '92 I decided it was time to upgrade from my kick-ass (but far too fragile) Tamiya Blackfoot. I was 14 at the time, and I'd been drooling over the Team Trucks that had just hit the scene. My Dad told me that if I could...

Since I never had a truck conversion til now (thanks Rod for the many truck conversions) I thought I would put one on my only gold pan temporarily. Rod if you come across any cheap RC10s I can put one you these conversion kits on let me know, I need...

First off I'd like to introduce myself I'm James and this is my RC10 I got it in a trade for a another R/C. I'm glad I stumbled onto this site appears tobe quite informative and it has pictures I like pictures :lol:

Plans for the RC10:
Finding a...

Cant wait to drive it, just waiting on fed ex :D :mrgreen: Its gonna be a great backyard basher. Its not perfect but its gonna be fun. Made a good little deal to get it thanks treehugger. I gotta finish cleaning that buggy and get another thread...

I'm not sure if it came from a board member or not, because I won it on eBay. The RC10t was my first electric truck (my first r/c was a Nitro brute) that I raced from about 94-95. Back then I swaped out the pan with a worlds car pan. I think they...

So I am converting this RC10T im building to 3/16 but I want to eventually breakdown and get some aluminum wheels. Would it benefit me to run 3/16 or should I just stick with 1/4 because I want to run maybe vintage aluminum wheels?

So I have a set of rear rpm carriers for RC10T/GT and im gonna get the bearings but AvidRC gives me 2 options, 3/16x1/2 metal and 3/16x1/2 revolution which are better?

And I have an original white stealth tranny and dont want to dye it black, can I...

Can somebody with an SC10 please measure the wheelbase, at standard right height and with the chassis bottomed out? I'm trying to figure out how much to stretch a 10T chassis to fit the body. My original plan was to line up the wheels in the fenders...

8)

Ok, I can't possibly be the only one who's ever thought of doing this.

Ignore the tires & wheels, that's an easy (Proline) fix....

Wheelbase & width are perfect (w/short course tires & wheels)

A front & rear bumper should be easy to...

why the RC10T and some other truck bodies' front wheel wells sit behind the actual wheels.
It bothers me.
Anyone else?

Is there a fix for this?
... aside from the one that I chose, which was the buggy body.

I'm brand new on here but not new to the Hobby. I dug up my old (or what the guy at the hobby shop called vintage - made me feel old) RC10T, after seeing my buddys new HPI blitz. My truck is in good shape and I got it up and running with a shock...

I've got a almost mint RC10T (has white parts) coming in the mail. I really prefer the white arms and parts to the black ones. Do you think the white would be acceptable to put on this chassis? Thanks for your input. To me this car looks too much...

Whats the value of a new t2 just assebled but not ran? Complete no electronics.

Now i know they made various colors of RC10 chassis but what about the RC10T?

You might call it an RC10
maybe an RC10T
I'm still on the fence, but RC10 B/T may be on the build sheet.

Original RC10T... updated with:
Novak 10.5t brushless motor, Novak GTB esc, tie rods and ends, Proline DIRTWORKS tires, a whole new set of...

Wasn't sure where to put this but since I'm interested in making some RC10T parts it seemed best to put it here.

I think this is most useful for vintage goodies that are out of production but there's scope for all sorts of things:

Here's where I...

well my wife was wanting a truck so i picked a rc10t up for her a couple weeks ago. well it included the original skinny front 3 piece wheels and tires with it. so i showed he pics of cds's rc10t with the skinny fronts and she really liked the way...

Hi all ive got a sc10 comong next week,iam going to use at my local club for a bit of racing but apart from that i will use it at my local scate park.
Iam going on holiday soon and i want to take it on the beach,so what iam after is does anyone know...

I had my B4 and my old/new RC10 over to my brother's house last week and my 5 year old nephew had to be a part of the action. His birthday is coming up in January so I am throwing together a cheap, but decent RC for him. So far I bought a RC10T that...

I know I need 2.2... that's it.
Please help.

I've finished restoring my two RC10Ts this fall thanks to the help of this board. They had been collecting dust for about 15 years. Amazingly, everything still works, even my Panasonic 1700 NiCads.

Both are pretty much stock.

Truck 1 is the...

Hello all,

has anyone had a Teambluegroove body in hand? Any feedback on the quality? They are more affordable than other ones, I was wondering if they're still worth covering a painfully restored 10T?

thanks!
Paul

Got this on ebay for $68, I'm quite pleased because of it's minty goodness :D

Other than that I am amazed by the way the truck has been put together, can you spot the wierd stuff?

this is the other thing i was givin by that guy that I bought theorignal hpi rs4 from for $15.

it also came with the stock rubber tires as well.

what would be the best power plant for the 10t i picked up another one this week end and it going to be a runner

I got this very nice RC10T from a now infamous member in a trade deal a while back. Contrary to other folks on here I have had a very pleasant and lucrative trading experience with him. This truck is just one example. I got the body in a separate...

I finally got around to snapping some pics of my carpet oval 10T project. It will probably never see the carpet, but it sure looks good. My favorite mods are the NTC3 shocks with internal springs. I got the idea from the crawler guys who do this,...

Hi being a newbie ive sorta sat on the sidelines ive read almost every post in here and ive come to the conclution that i like it alot :lol: anyway back to the truck its a rpm i picked up on fee bay a couple of weeks back someone had tried to dye it...