I read earlier in the thread about the Novak Havoc problems one member had with running a brushless system with an older radio.
Is glitching a common problem with running a brushless set up with an older radio (non 2.4ghz)
I am wanting to buy a...
Last post
I run an old Futaba Pistol radio, and I've NEVER had any problems of any sort while running my EZRun brushless combos, and none of my racing mates have had any issues either. Go for it mate, you shouldnt have any hassles...
I have a Futaba 3PDF on 27Mhz that I bought new in Japan back in 1998 when I was stationed there. Well about 6 months ago the thing totally crapped out. So I disassembled it looking for something simple that...
Last post
Go for it, what you got to loose at this point. IMO 2.4G is the way to go.
Everyone else has it, so there's really no need to bother. That's what I told a friend of mine who was reluctant to start racing because he didn't have one. No one I can think of(including me)runs an AM/FM radio at my track. Or PCM(although I would...
Last post
Personally I have had no problems with the Traxxas Link system. I have three transmitters (me & 2 kids) and have bought receivers for every buggy we run. I had no problem setting them up, but I am not looking to set exponential steering or anything...
I have been unable to find a comparison chart between brushed and brushless motors. For example, a 10.5 turn brushless is equal to a __ turn brushed.
I want to place a new brushless system in my RC10T and want to make sure I will not overpower the...
Last post
GTB's are programmed with the setup button:
With the B4, you should be able to gear the 17.5 high enough to give you plenty of speed to clear the jumps. The 17.5's like big pinions! I ran 28/81 in my RC10 with the 2.25:1 stealth. Final drive...
Does anyone know what size lipo batteries will fit in the rc10T battery tray? The one running down the middle of the truck.
Robert
Last post
Hey Guys,
Will most of the hard case lipos that fit the current buggies (B4) fit the first gen RC10 and on up to the worlds car. I am mostly interested in if they fit the original RC10.
what are you all running for stock class brushless. I see all kinds of Mods but for the Vonats it says 17.5 brushless, and I looked them up and their all over the place in price. what is everyone running?
Last post
I can't personally vouch for the XP stuff. If it is indeed made by LRP, I'd say it would be allright as long as the motor limits are adhered to. I have a sneaking suspicion that they are made by Thunder Tiger and not LRP, seeing as they are...
Kinda like the header states...what should 'ballpark' temps be for electronics?
Say for instance...this was last weeks temps on a first run setup on my b44.
Castle Brushless ESC=240+*
castle brushless 7700 motor=188+*
Maxamps 6K lipo...
Last post
Went to pick up a 23 yesterday and had the last one in my hands. Of all the things a new customer was there pickin up parts and his last request was for a 23t pinion :roll: . He had money on him and alot of $ in parts he was pickin up and they...
so my car arrived today sporting a thunder power 5000 mAh 1 cell 3.7v and i was wondering if i bought an identical pack could i then use them as a saddle pack the pack reads charge as a single pack.
Well, its finally happened. All my 14 year old Nicads are starting to die out on me, and since I'm faced with having to buy new batts I was looking at Lipos due to their low weight and cheaper prices then NiMH cells. I have a charger on the way that...
Last post
for $35 each the turnikey packs are great. i have 4. you cant even get good nimh packs for that. i get excellent run times with them. i wouldnt even consider buyin a nimh pack again.
Im thinking of getting the new ESE. I can't race my 1:1 this year because of my back deal but they have RC races at all the events so Im thinking I might as well do that.
With that said I am clueless about all the modern electrics. What do I need?...
Last post
Same with me. I am not preaching to anybody. Castle is all that I have owned. I really think any brushless system is better than not. You don't need to get crazy with the high KV rating motors and 3s Lipos. I think the insane speed that always gets...
so i just finished my lot racer a cut down ds it has a ten turn hand wound motor i have run it before with no probs
its got a tekin speed star 412P some runner nihms 3800s and my new perfex radio first time out new build you take it easy i had to...
Last post
well i m glad i didnt leave feedback i got it for about 12 bucks it was new out of box (probably came out of some kit)
if it persists he will be getting it back
i am going to be buying a mod motor lathe. what is better v block or bearing lathe i am looking at the entegy mod fasion motor lathe with bearing support. what is the best and why? i have found one for 39.99 plus shipping.
Last post
Cool, my Hudy Pro came today. Looks in great shape, lots of copper shavings but everything is nice and snug. I stripped it down, cleaned it, rebuilt it, and it seems to be pretty good. Tight tolerances, so lubricant makes a big difference. I look...
I just took my RC-10(with a b3 stealth) for a run at the park for the first time with the Novak BL 10.5 . I drove in the volleyball area, but spent most of my time on very short cut grass. The motor stayed warm to the touch for the full battery(15...
Last post
the manual on the Traxxas 3500kv motor says that you should be able to hold your finger on the motor for atleast 2 seconds. Hows that for a rule-of-thumb. ;)
after spending 20 years in construction i can pull stuff out of the stove with no glove so...
So whats the latest greatest brushed mod motor for offroad SC type Trucks today? If that new HPI would ever come out.
Last post
As far as mods go, I have always liked Trinity SpeedGem series. Pretty sure they are still available. Recently had bad luck with the Venom series.
Momo
I certainly agree with the SpeedGems recommendation - real good motors.
Does anyone know if the low profile heat sink for the Havoc 1s and 2s will fit the Havoc speed controller included with the Havoc 10.5 Spec combination?
Thanks,
Ed
Last post
I had the low profile on 1/12th scale but couldn't get a good wiring run and the plug to the receiver sat so high that it had to be in the center of the car. Because of this and the beer can size capacitors I took the whole thing off and put it on...
I picked up a new Losi handset for my micro crawler, and 3 sr300 spektrum rxs for $100 the lot, which pair to the Losi fine, all in all a good system for all my micros for around $150.
The Traxxas Summit radio with 4ch is avaailable in 2.4 about...
Hey gang! I bought a Novak Havoc brushless combo for my RC10 a few months ago. I loved it so much that I bought another for my SC10. I've had nothing but problems with second unit. Initially it would not even program. I called Novak and they said...
Last post
Mikey,
gear it down some, 26/78 is a much different ratio on an RC10 than an SC10, even with the trans ratio being lower in the SC10, the tire size on a short course truck will really kill it, monitor your temps too, make sure you're not getting...
I'll try to keep this as brief as possible. I'm looking for clarification/confirmation on my view of lipo/esc combinations. I'm at the track last night racing the SC spec class. Most trucks are Slashes that have to use the XL-5 and 12t Titan motor....
Last post
I didn't want to start a new thread for this, but thought some might find the info helpful. It would be nice if more companies were represented, but it's better than nothing. Although, I would disagree with their final results review of the Winforce...
I know this charger has been mentioned here before, but a buddy of mine got one so I got to mess with it first hand and I can’t see how you can go wrong with it. Comes with about every type of connector, an A/C plug, usb and software for a computer....
Last post
Just a footnote, excellent quality Deans, ordered three sets to get bulk discount, that worked out at $0.60 a pair with shrinkwrap, arrived in UK in 12 days :D
Ive got a Novak Hammer Pro in my gold pan . will I be able to run Lipo with this esc :?: ? Thanks in advance
Last post
you should be able to run a 2S lipo in pretty much any esc, the only problem with the lipo is you need to either make sure the esc has a lipocutoff alarm, install a small lipo alarm, or pay close attention to the cell voltage.
Hey guys, I was running my TA03F drifter with a 5.5T brushless/60A ESC a few days ago, and the steering and throttle started to cut in and out. I pulled the car up, turned it off and back on again, and *pop*- a little puff of smoke comes out of the...
Last post
well, it is very hard to determine what tha part was. It could be probably one of 2 things.
either a tantalum capacitor, or possibly a diode. If the remnants of the part look like they were black plastic, and the leads looked like they came out and...
I went to the track today and found out my new Havoc 10.5 Brushless setup does not work with my radio gear. I couldn't even complete 1 lap it was so out of control. I drove home and installed my Novak T4 & Trinity C027 which did not cause me any...
Last post
Installed a Tower Hobbies 224 2-Channel 2.4GHz radio last night. I was surprised at how small the receiver was when I opened the box compared to my Futaba receiver.
Took it for a rip in my driveway without any glitching problems.
which of the new brushless motors runs the best in a vintage RC10, looking for the same install as the current motor. I still have the origional motor and wont to take it out and keep it aside but also looking for some power as the RC10 will be used...
Last post
For bashing around with a 25 year old car, how much speed do you want? Any car not built for racing is at risk of blowing things up. Upgrade the car if you want to blaze up and down the street with insane horsepower, but if you want to play around...
I'm a newbie here - In fact I am a newbie to the sport.....and I like to built thing.
I have a project that needs a 2+3 channel operation,
First Channel need to mix with 2 slave channel,
Second Channel need to mix with 1 slave channel....
Last post
JET,man I have got to see a PIC of the 6X ,I've been lookin at a couple on 4X4 sites to rich for my blood,but fun to DREAM,welcome to the site,these guys are great,very helpful,you'll see. JohnnySr
hey guys, new to these boards, time for a little introduction
I live in japan at the moment, and the auction sites here are a goldmine for kyosho, tamiya, yoke, mugen etc, so after a 15 year spell away from RC, its reawoken my love for RC :)...
Last post
I will openly admit that smaller scale brushless motors are nowhere near the realm of my expertise, but I would guess that living anywhere in Asia you’re going to be able to experiment quite a bit without spending nearly as much as you would in the...
Hi, the gold pan RC10 I bought used should be coming in the mail soon and since I've been out of the hobby for so long, I'm not sure what is up and down anymore. Brushless? Battery technology? ESC's still the same (I see that the brands I remember...
Last post
Thanks to civilguy (we made up over pm after our row) for the great deal on some gear to get my car going. Now I'm just missing a pinion gear with the right pitch. Maybe this weekend I can get to the hobby store and they will have a gear with the...
Broke the front bulkhead on my traxxas slash so I decided to throw the velineon brushless and 3c lipo out of my slash into my gold pan rc10 with a 6 gear trans. Diden't even last 10 min and tha counter gears in the trans stripped out. Hoped it mite...
Last post
I run the Castle systems in all my cars and trucks. I have a few Mamba Max's and the new Mamba Max Pro which is ROAR legal (don't know why the older ones aren't). I could not be happier. I have not run them in a 6 gear but use caution. A 4600 would...
Looks capable but I have no idea. Comes with power supply and other goodies.
These are the batteries I'm starting with.
Thanks, Dave
Last post
The boy and I are pretty excited!!Cant wait for everything to arrive.I was prepared to buy a Hyperion but I just couldnt ignore the Imax's price and Timbo's endorsment.Thanks all!! :)
hi i would like to know what you guys thing, can a standard brushed esc like the novak cyclone, or even a sport esc handle a 550 size motor such as traxxas 12t . doing a budget for now thunder tiger eb4 s2 electric converion. thanks
Last post
I'm giving a shot with one of 550s I got a lot of parts of the bay for 40 bucks
I built I gas car out of it and have the parts for another and the
aluminum i need at work so it's somthing for fun project
if it works ok I'll try brushless thanks...
Is there any issues with using copper stranded wires for the ESC and Motor?
Last post
just be careful when resoldering new wire into a speed control, some of them have multi-layered circuit boards which can pose a problem if you dont re-solder all they way through, try to get the heat on and off as quick as possible as surface mount...
How much are you supposed to discharge NIMH and NICD Battery? To what V?
I just got a Hyperion EOS0606i charger. And I'm trying to tune up some of my Batteries. And I'm not shore how to go about it.
Thanks
Last post
I have that same charger and do I love it :D
None of my Nimh battery's are top of the line. When I first received the charger I just just performed a discharge/charge cycle and it seemed to wake up the batteries better than my Integy Peak charger...
Does anyone know if a JR XR2 transmitter will work with an Airtronics receiver. Both are 75 mhz AM models. My Airtronics transmitter recently quit working and I'm looking into replacing it. I want to keep my receiver because its a micro one that...
Last post
I finally got around to calling JR radios customer service and they said that it will not work. Maybe she was just trying to keep me from using Airtronics gear. I'm gonna just keep my eye out for a vintage Airtronics AM radio.
My Novak 10.5 w/ GTB is shutting down due to motor heat.
What I'm asking for here, are suggestions for heat sinks, fans, gearing solutions, or anything else you can possibly think of to make it run cooler.
My gear ratio is pretty...
Last post
Were the MSCs rated to a motor w/ a certain number of turns?
How about, say, a double wound 13 turn?
You can give me the usual advice telling me that I'll shred the tranny... but I probably won't care.
I've already had the 10.5 turn brushless...
I know with certain cars it's hard/impossible to fit a 7 cell battery or 3s lipo in due to length or height restrictions. There are probably other options out there, but here's one if you don't want to do the research. Not the greatest pack on Earth...
Well I own Speed Passion 1.1
I used to own a Mamba Max Pro, it was awsome but i can't fit it on my chassis and have it hang of the side of my chassis damaged my Fan bracets.
So I am out for a new ESC, its seems its all about programable ESC now.
If...
Last post
My first and car was a buggy with gold chassis when i was 14 and still have and are looking to fix a broken front control are and know where to get that but not sure what kind of esc to get. I had a tekin on it but put it on the son's new rc10 t-4...
I have a 6volt/12volt charger that charges at 2,4 or 6 amps.
It was originally meant for motorcycles batteries, and the like.
I now have a different charger for the bikes so it is collecting dust.
Could I change the connection on that to fit my...
Last post
now i know how turn lipos into a fire ball for fun.
Lead acid no peak detection lots of amps and fuzzzzzz
Could you guys help me Choose a Motor for my Cat 2000ec, i bought it off Ebay & it has a Team Infinity 13 tripple motor. I would like to put this motor into my Cougar 2000 & upgrade the Cats motor. Im unsure of what to go for as im slowly getting...
Last post
In the Cougar2000 i have an old Tekin ESC & in the Cat there is an LRP IPC digital Speed Controller.
im not fussed about sticking with Brushed, Brushless is defo an option.
I have finished cleaning up my vintage RC10 and have an old Futaba Magnum Sport radio and receiver in the car and for some reason it glitches like crazy whenever the throttle is applied. I have checked the capacitors on the motor and tested all...
Last post
Where is the esc mounted and where is the receiver mounted???
It's best when the receiver is furthest away from power leads (motor and batt)....
Usually if a crystal goes bad, you have no reception at all.....
So, it's been a long, long time since I've had to deal with capacitors. I'm wondering if I need some now. I'm trying to get my RC10 truck conversion up and running. It's got a new Reedy StockStar motor in it:
Which, according to the AE site says...
Last post
I recently tried getting all nostalgic and set an old techniplus acoms radio in one of my beach scorpions. The car got about 5 feet away then started going C R A Z Y ! The antennae wire was plenty long enough and everything was wired in right....
I've seen several references on the Internet about trimming the receiver wires on the Spektrum receivers, but I haven’t found anything that was really clear as to why. :? I’ve used these radios for a while now- and they work fine in stock form - but...
Last post
One thing you could do is to make an antenna loom .
Take a scrap piece of lexan and drill holes in it to take up the extra antenna. Drill the holes so that when you thread the wire through it makes a zig zag pattern.
Users browsing this forum: No registered users and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum