just wondering what is the toe-in angle on the rc10 rear arm mounts? ive read references to 3deg,1.5deg and 0deg in other threads and am wondering what is the kit standard.or is it the outer hub that changes?
the short arrm cars came with 1.5 mounts and 0 degree hubs. then when the 6 gear graphite and CE, they used 1.5 mounts AND hubs. that's how they all were until the b2 came out.
anyone know where to buy rear arm mounts??? for a long time you could get rc10ds alloy rear arm mounts but now there all gone...im looking for anything that works..i dont care the brand and i dont care if its something like a traxxas part... i hear...
Last post
Would these fit on the RC10 if I removed the front eye ?
Hot Racing Associated RC10GT aluminum rear arm mounts RGT010A
I'm about 99% sure the answer is yes but the seller couldn't say for sure... I bought some rc10gt blocks a few months back that I was told would fit but apparently they are slightly off to mount on an rc10t.
Last post
Hi,
Team Associated made running changes, they also recycled some part numbers just to make things confusing,
and there was optional rear mounts and hubs.
ASC6360, 1.5 degrees rear mounts are in the #7001 kit.
I busted one of my stub axles the other day presumably bc i have too much down travel in my shocks ( im gonna fit that soon) and my stub axles are old and warn...
I ordered a cvd kit and some RPM arms for the rear. I noticed before but just wanted...
Last post
thanks gomachv.
Also, when i mount the shocks on the outer most hole on the rear arms, the tire touches the shock. the rear is set with some negative camber. would i just need to go more neutral to positive camber ideally or just not use the outer...
I have been a member for awhile and put up a couple of posts here and there, but this will be my first question on the forum. Through the years I have purchased a few RC10s and parts lots, and amassed a few rear arm mounts, front and...
Last post
Many thanks for the reply, and great info, looks like I need to get a protractor and a piece of tubing or rod to seperate all the front carriers I have. Now will there always be a L or R markings on the 1.5 Rear hubs or do I want to go by how thick...
Are they still available new?
I'd like some new black 3 degree toe-in ones if they are. Anyone know the part number?
Cheers,
G
Last post
The mounts physically fit the chassis, but...
The arms are shoved into the short wheelbase position and, at least with regular white arms, they're bound against the chassis tub. Also there's an axle clearance issue, as the GT trans is slightly...
Please anyone out there, i need to know where I can find a t4 rear arm mount but it has to be aluminum blue or silver but i cant find anything on online only plastice or black alloy i need blue alloy. Anyone know where I can locate one of these?...
Last post
Just found blue so disregard this post thanks to everyones help
my dilema is i want stronger rear arm mounts and im really limited on what i have laying around and just dont know if what i have will survive the season im gonna put my truck through. any suggestions as to what to run or where to buy from?. i have...
Last post
soo funny, this topic never ends.. its like if someone made rear arm mounts for about $10 shipped they could sell a ton .. they are a $2 part