- Whity white RPM Ultra molded chassis (update) -
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: -Whity white RPM Ultra molded chassis (update)-
I have had an order with RPM that screwed up and Richard Royall kindly accepted to sign the chassis for all the troubles I've had. You can try to send it to him in order to have it signed by him, but he is very shy when it comes to sign anything, so you may send a few emails before he accepts... Later on, I also asked for an authentification slid and I've still no answer about that, oh well I got a ton of emails to prove it...badhoopty wrote:sweet car dude. how'd you get it signed?
(i want mine signed too... )
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: -Whity white RPM Ultra molded chassis (update)-
I got this letter today from Richard Royall (RPM CEO and designer of the car). This is just for the sceptics among you guys, if there are any
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Wed Dec 12, 2007 9:43 pm
- Location: Illinois, USA
- Been thanked: 3 times
Re: -Whity white RPM Ultra molded chassis (update)-
Very nice!!!!
Are those losi wing tubes mounted upside down?
Regards,
highwayracer
Are those losi wing tubes mounted upside down?
Regards,
highwayracer
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: -Whity white RPM Ultra molded chassis (update)-
Thanks! Yes they are Losi tubeshighwayracer wrote:Very nice!!!!
Are those losi wing tubes mounted upside down?
Regards,
highwayracer
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: -Whity white RPM Ultra molded chassis (update)-
After years and years of searching, I finally found the missing MIP shock caps for this ride! These are darn hard to find!
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: -Whity white RPM Ultra molded chassis (update)-
Hoop, dig into the other pages and you'll see that I'm actually using VLT's on it, though they are Losi stylish the black Losi shocks came with the blue MIP cartridges. By the way, did Losi ever released black shocks or are these MIP too?badhoopty wrote:it's good to see somebody using shocks besides vlt's on an rpm.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - Whity white RPM Ultra molded chassis (update) -
Though I already have a very good example, I couldn't resist this one, has been run one time indoor, fitted with Triumph gold shocks and tranny (weird!), 2.2 HPI 5-spoke rims at all corners, nice RCPS body, Tecnacraft turnbuckles... only missing a rear a-arm and RPM specific steering components. I'll post better pics once arrived and cleaned a bit.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- RC10resto
- Super Member
- Posts: 2925
- Joined: Tue Sep 09, 2008 2:26 am
- Location: Los Angeles, CA
- Has thanked: 1064 times
- Been thanked: 417 times
Re: - Whity white RPM Ultra molded chassis (update) -
Nice find, keep us updated!
I would like to see a white RPM trans case on your shelf queen, will one fit?
I would like to see a white RPM trans case on your shelf queen, will one fit?
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - Whity white RPM Ultra molded chassis (update) -
Yes it will....................... with a lot of dremelling on the trans case or rear arms mounts, Scr8p did it for one of his builds!RC10resto wrote:Nice find, keep us updated!
I would like to see a white RPM trans case on your shelf queen, will one fit?
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- scr8p
- Administrator
- Posts: 16514
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 948 times
Re: - Whity white RPM Ultra molded chassis (update) -
that should clean up pretty good, david. so, how many is that now, 4-5?
here is a couple pics of the trans case mod.
here is a couple pics of the trans case mod.
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: - Whity white RPM Ultra molded chassis (update) -
I have one built and signed by Richard Royal and I must now have enough parts to build 2 other ones. I didn't need this one but it was sooo cheap I couldn't pass it up, especially with all the goodies included. I sold a complete new chassis to momo a long time ago and I am missing two bellcrank sets. The 5 spoke rims will go on signed my shelfer and I will probably relist everything else; time will tell... Looks like I have a Triumph project now, oh noooooooscr8p wrote:that should clean up pretty good, david. so, how many is that now, 4-5?
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 886 Views
-
Last post by RABIDFOX50
-
- 6 Replies
- 1410 Views
-
Last post by cybercrxt
-
- 20 Replies
- 4175 Views
-
Last post by slotcarrod
-
- 11 Replies
- 1404 Views
-
Last post by transamman908
-
- 3 Replies
- 573 Views
-
Last post by jcwrks
-
- 24 Replies
- 1645 Views
-
Last post by jcwrks
-
- 11 Replies
- 1006 Views
-
Last post by MarkyDents
-
- 31 Replies
- 2780 Views
-
Last post by Bugle
Who is online
Users browsing this forum: RogueIV and 5 guests