MIP 4wd-10 possible reissue
- Patriiick
- Approved Member
- Posts: 42
- Joined: Wed Jun 18, 2008 9:27 am
- Location: Paris, France
- Has thanked: 1 time
- Been thanked: 3 times
MIP 4wd-10 possible reissue
There are a couple threads on facebook about the possibility of a 4-10 reissue run of the kits.
Please email interest at [email protected]
I will let everyone in the know throw more info about it
Please email interest at [email protected]
I will let everyone in the know throw more info about it
I can't drive 55 !
- GoMachV
- Approved Member
- Posts: 11253
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 797 times
- Been thanked: 2293 times
Re: MIP 4wd-10 possible reissue
Been there, tried that. There's 26 pages on here from the last attempt. In 2009 it was protected to cost $500 too. Time will tell, keep the emails coming....just don't hold your breath
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 3 times
- GoMachV
- Approved Member
- Posts: 11253
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 797 times
- Been thanked: 2293 times
Re: MIP 4wd-10 possible reissue
Cause that's where they keep the drama lol
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- scr8p
- Administrator
- Posts: 16514
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 948 times
Re: MIP 4wd-10 possible reissue
It's called a joke.
You guys can talk about it all you want, but I heard enough about it last time.
You guys can talk about it all you want, but I heard enough about it last time.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: MIP 4wd-10 possible reissue
Jeff, in light of this i feel we should stop all development of our 4wd rc10 kit immediately.
NOT!
NOT!
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 3 times
Re: MIP 4wd-10 possible reissue
scr8p wrote:It's called a joke.
You guys can talk about it all you want, but I heard enough about it last time.
- RichieRich
- Approved Member
- Posts: 2350
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 34 times
- Been thanked: 19 times
Re: MIP 4wd-10 possible reissue
Yeah, I'm giving this low odds of happening too.
Probably should be on Myspace instead of Facebook.
Probably should be on Myspace instead of Facebook.
- losiXXXman
- Approved Member
- Posts: 936
- Joined: Sat Aug 29, 2009 9:53 am
- Location: Cary, NC
- Been thanked: 5 times
Re: MIP 4wd-10 possible reissue
Everyone "on the know is already here...and already knows that that aint happenin'.Patriiick wrote:
I will let everyone in the know throw more info about it
Welcome to the board though Patriiick. FWIW its unlikely you'll get the scoop on any developments on the vintage RC front on anyone here. Do a search, and find that thread to read for fun. YOu should go ahead and check out the one about RPM rerelease of 91 worlds stuff too. If you ARE interested in the potentiality of a 4WD RC10, check out gomachvs and mkzeros thread on their joint development.
-
- Approved Member
- Posts: 699
- Joined: Sat Mar 06, 2010 3:38 pm
- Location: Vraa Denmark
- Been thanked: 1 time
Re: MIP 4wd-10 possible reissue
In need of a huge LIKE button
losiXXXman wrote:Everyone "on the know is already here...and already knows that that aint happenin'.Patriiick wrote:
I will let everyone in the know throw more info about it
Welcome to the board though Patriiick. FWIW its unlikely you'll get the scoop on any developments on the vintage RC front on anyone here. Do a search, and find that thread to read for fun. YOu should go ahead and check out the one about RPM rerelease of 91 worlds stuff too. If you ARE interested in the potentiality of a 4WD RC10, check out gomachvs and mkzeros thread on their joint development.
Morten Max
- stickboy007
- Approved Member
- Posts: 695
- Joined: Sun Sep 16, 2012 6:13 pm
- Location: Mahopac, NY
- Been thanked: 17 times
Re: MIP 4wd-10 possible reissue
It all comes down to projected demand and whether that will offset the cost of developing and manufacturing a re-release 4-10 kit. I, for one, would gladly buy one, and I doubt any of us would complain if such a kit were re-released. Even if the chance is small, I'd still put my hat in the ring for one. No harm whatsoever in emailing Matt and letting him know you'd buy one, on the slim chance that they'd actually do this.
That being said, I do wonder if such a re-re would be designed for the crummy re-re Stealth gearbox, or for a proper stealth gearbox, which uses the single piece idler gear and idler shaft. I don't imagine how it could be for anything but the latter, and since AE still sells those gearboxes, it shouldn't be a problem.
That being said, I do wonder if such a re-re would be designed for the crummy re-re Stealth gearbox, or for a proper stealth gearbox, which uses the single piece idler gear and idler shaft. I don't imagine how it could be for anything but the latter, and since AE still sells those gearboxes, it shouldn't be a problem.
- GoMachV
- Approved Member
- Posts: 11253
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 797 times
- Been thanked: 2293 times
Re: MIP 4wd-10 possible reissue
It couldn't work with the junk world's stealth, it needs the bearings in the case not the idler. Still, and easy thing to buy.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- aeiou
- Approved Member
- Posts: 1071
- Joined: Fri Apr 13, 2007 4:04 pm
- Location: Atlanta, GA
- Been thanked: 1 time
Re: MIP 4wd-10 possible reissue
I think I just heard someone at MIP say "Oh #$%^, here we go again'...
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 19 Replies
- 1717 Views
-
Last post by hugger19
-
- 5 Replies
- 822 Views
-
Last post by Mad Racer
-
- 71 Replies
- 12827 Views
-
Last post by Lavigna
-
- 3 Replies
- 755 Views
-
Last post by GoMachV
-
- 1 Replies
- 542 Views
-
Last post by mrlexan
-
- 35 Replies
- 5179 Views
-
Last post by AscotConversion
-
- 9 Replies
- 1580 Views
-
Last post by clodsrule
-
- 21 Replies
- 4184 Views
-
Last post by amx73
Who is online
Users browsing this forum: Ahrefs [Bot], spylo27 and 5 guests