Well, don't get too excited... I found pictures of Jay's car. I thought there would be a few more standard AE kit decals
The only decals I may have are the black Team Associated decals that are on the side of the tub. Not sure if I have black or white from a 10L kit I will dig them out and let you know.
Here is the spreadsheet listing all of the mods/parts needed for this project. It's originally an Excel file, but I exported as a JPEG and broke into 3 seperate pages to get the file size small enough. Let me know of any errors or additions and I will update.
Well today was my birthday, so I got a little time to install the correct servo and front shock tower. Thanks to Kooz for selling me a hard to find S131 Servo. I found a graphite shock tower on Ebay for a reasonable amount, solving my Ritt Dye issue.
Rainy week, so took the opportunity to Incorporate new parts on the JJH Classic project:
1) Installed correct Novak Receiver (Not an easy part to find)
2) Replaced Classic Shocks with period correct versions
3) Replaced butchered G-Plug wiring on Novak ESC (Tested my eyes and soldering skills)
4) Corrected Battery Plug
5) upgraded front wheels (chrome)
6) Test operation with NIB Airtronics XL2P Radio System
Overall I'm pleased with how the re-re parts integrated with the vintage chassis and other components. The reproduction chassis is often a lighter gold, providing a more authentic look.
They are Proline 1.5" wheels that fit the Rough Rider (#200-F). You will also need Tamiya Wheel bearing adapters. If you click on the spread sheets, they will enlarge so you can better read them. The spread sheet contains all of the parts needed for the replica.
If you search eBay for Proline 1.5 wheel, they show up fairly regularly. Here's a set showing now:
Here are some pics that had been sent to me earlier, and are now public which is why I am posting them at this time as I was just notified that it is on their webpage, of one of the bodies & wings I painted up for Associated prior to the...
Last post
Anyone else have a source for OOS JConcepts parts besides the bay?
Here are a few pics of my RC10 Re-Re runner. Wanted to keep it mostly stock. Only upgrades are JConcepts bellcranks and 2.2 inch wheel conversions. Let me know what you think!
I just recently dug my 1988ish RC10 out to get back into RC. I have been having trouble finding rear axle parts. I wanted to install a CVA but the ones I found on Ebay are really expensive at $89 and $109. Is there an upgrade? Do people swap out the...
Last post
I wanted to swap out the dog bones for CVA but it sounds like that may be more trouble than it is worth having an early version of the RC10. I am going to put it back together and see how it goes.
I think I am missing 1 of the springs for the dog...
I wont bore you with the step by step pics of my build, as it is basically standard apart from replacing the bushings with bearings. Were I did go away from standard is by using a Viper body instead of the Protech. I also have a different rear wing...