will this B4 gear cover woth on a stealth trans gold pan car

Post by **FlyinGN** » Tue Mar 13, 2007 10:23 am

http://www.losipartshouse.com/servlet/the-23247/RPM80082-RPM-Gear-Cover%2C/Detail

Thanks!

Post by **Eau Rouge** » Tue Mar 13, 2007 10:53 am

Nope. Top screw hole lines up, but there is no plastic on the bottom to line up with the gold pan motor plate. There will probably be clearance issues with the gold pan driveline and the gear cover, as well.

Generally, nothing on the B4 will work on an original car, outside of shocks, springs and tires on 2.2 wheels. They are completely different cars.

Post by **terry.sc** » Tue Mar 13, 2007 12:57 pm

Why not just order an original cover
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LX2791&P=0

Post by **FlyinGN** » Tue Mar 13, 2007 1:22 pm

thanks Eau..
I did order one from tower terry.sc, But I like the rpm one:)

Post by **aconsola** » Tue Mar 13, 2007 3:23 pm

are the gear covers for the original 6-gear and stealth transmissions the same?
-Anthony

Post by **Eau Rouge** » Tue Mar 13, 2007 4:22 pm

Yes, they use the exact same motor plate.

Post by **Tadracket** » Tue Mar 13, 2007 4:41 pm

Eau Rouge wrote:Yes, they use the exact same motor plate.

I had to tap a new hole in my gold plate to make the Stealth fit.

RC10Talk - The Net's Largest Vintage R/C Community