I guess that this would be the most appropriate place to share this infomation.
I just can't leave stuff alone, so I've put my 3d printer to work making parts for the re-re worlds car I recently picked up.
Link to the files if you want them:...
Last post
I got those buggy wheels & tires from Amazon and dig them! Thank you for turning me on to them.The outside dia. of the tires are a little tall but that's ok. I found some 12mm hex adapters in my stash (stock ones from a TC4) that worked for now....
With all the very cool vintage RC cars that I see in this forum, and with the trouble and expense that some people go to get them as good if not better than what they would have been originally, it occurs to me that with the advent of technology...
Last post
It doesn't have to be attached, there is a support material that is removed after the part is finished.
I am looking to get some parts printed in PCblend. I think I have one .stl file sourced already. But, another part I need is a variation/prototype version of what later became the production version. There is enough of a difference between the two...
Last post
Looking at the part, it looks quite easy to model... And a nice start to onboard within 3D design with Fusion360...
So I have an Ender3 V2 I picked up last Christmas. I have been using it for smaller functional prints and am curious about making some replacement parts for RC cars. I have been learning to design parts on Tinkercad and have found some on...
Last post
Fusion 360 is free for makers and should suit your needs as long as you aren't a commercial user.
First off, I’m new at this. I’m not a pro. I’m learning as I go
I have two printers. A Malyan M200 and a currently unfinished Creality CR-10s. The Malyan is printing really well right now so I’m in no hurry to finish up the Creality. The CR-10s...
Last post
That works perfectly !! Now you just have to build an adorably small vacuum as well :lol:
I've been modeling and printing parts like crazy lately, a lot of which are SRB based. Thought you guys might like to see the progress. This first set is all the vintage style nylon bits. I'm also working on a rear mono rocker that works with the...
Last post
Hi, welcome.
Have a look on Shapeways j-sou has a shop on there where youbuy the items in the first photos.