well the narrow rear of this build really bothered me so............ i stepped up and put the correct rear rpm arms also added a rpm bulkhead and rpm frt bumper.
ok i never liked how the rear end of this car came out was too narrow so i changed the rear wheels to yokomo wheels and it widened the rear. now it looks better for sure!
Here we go again. I've had this NIP Composite Craft Worlds RC10 chassis for a few years. I was torn between building it vintage or modern. Since my first CC RC10 is mostly vintage with some modern touches, I wanted to stick true to one direction on...
Last post
I don’t know man I’m thinking that mini bumper has had that header card since day one…. Not seeing any other staple holes in it. The true tell will be if there’s more holes in the bag :D
I looked at it closely. The header card and staple appear...
A all new complete RC10 Composite Craft / RPM World 1991 , I had an Hydradrive and the Yokomo wheel adapter 8)
On this one I use a Houge Enterprise steering system !
Parts are finally coming together for my Worlds chassis build. The bulk of the chassis will be aftermarket parts from Composite craft, RPM and Tecnacraft. I just put the finishing touchs on the wheels. Here is a peek.
Last post
Thanks for the compliments guys
So what is the history behind this car? What year worlds were these parts made for? This car is funadamentally different that the worlds car associated released.
Jim, I know you are looking down from above. Hard...
Hello,
I recently acquired a Composite Craft worlds chassis for a new build and was curious if it is a vintage or new chassis? I am pretty sure it is not a vintage but was wondering if there are any tell tale signs of old versus the newer ones? I...
Last post
I called Composite Craft and they will still make you a new chassis very reasonable in price, add the dynotech Klein world arms and you could make a new vintage re re runner... 8)
Heres a car I have been gathering parts for for the better part of 5yrs. As you can see its not a real CC chassis. I have a real one that is beat to hell that I used as a template to craft this one out of a different NIP chassis I had laying around....
Last post
you can use any rc10 rear tower with the rpm rear bulkhead. just drill 2 new upper holes in the tower to line up with holes in the bulkhead.
Hey guys, just wanted some opinions with what you have done to the rear bulkhead to make it fit with the a-arms. Also I am running into some clearance problems with the upper deck hitting the rear shock tower... what did you guys do? Any suggestions...
Last post
couple different examples. all black rig shows stock tower and just clearancing the area under the upper deck screws, keeping the gap overall nice and tasty (imho). second pic shows how little of the stock bulk really needs to be trimmed.
Hello Everyone! Well its been in my collection long enough and i couldn't look at it unbuilt any longer. This did however take me the longest of any other project to locate the needed parts but was well worth the wait. This is what i have done so...
Last post
I think having some of these parts machined in delrin would probably be a far cheaper method of having them recreated.
chad smith form dynotech was working on that but i don't know how far he ever got.
ya budget no more lol! at least its done for good now 
Google [Bot] and 43 guests