Thanks -
Everytime I´m about to paint a body, I have big plans; Japanese flags, checkered goal flags, My Little Pony´s and rainbows - Learning airbrush techniques and stuff. (Still have an unsed airbrush sitting on a shelf going on fifth year)
But I always end up with the most simple schemes know to man
I picked up a Losi XX and some parts cars after reading through the threads and seeing the appreciation everyone seems to have for it. My last Losi was a JRXT I had as a kid. I loved that truck and still have it today. While I am not the best driver...
Last post
Wow this is great information. Thank you all for your help. My head was starting to spin reading through all the XX post and looking at the pictures.
I am going to clean them up as 2 buggies and a truck. I just wanted to try to keep them as...
Drove my T2 this past weekend at my local indoor clay track for the first time since refurbishing it. Truck was good on straights and jumping, but turns were a nightmare! The first issue is my rear universals were popping out when I drove it hard...
Last post
Thanks for the tips Joey. After a few weeks of trial and error, I have the truck setup nice. Is there a blank T2 setup sheet floating around? I couldn't find one. Anyway here is where I'm at. No bones slipping out of the drives either.
I have a few T3 runners so I have collected quite a few parts of the years. My daughter is getting to the age where I thought I'd put a truck together for her too. After digging thru my stuff I discovered I have enough parts to build a truck with...
Last post
Cool build you've got. I've become a big fan of the T3/B2/3 series over the past year. I am nearly done with my T3, and currently working on my B3.
That's nice! I believe you picked up a B3 from me in 2021. My all new build I did similar to my T3...
Here are some picture of my RC10DS that I put together from parts I obtained. I have a few custom parts on it. The transmission has a B4 topshaft with Avid slipper. I used RC Carbon Works shock towers. In some of the later pictures you will see that...
Last post
Haven't had a chance to run it other than on my hardwood floors. I am hoping to hit the local indoor track in the next couple of weeks. I don't know if they will let me race it as they are all 4wd, but I should be able to run it during practice....
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...
This is a c stamp, with a copper head motor, modern ESC, Spektrum RX running 2S, and of course the new Jconcepts Protector body and Mono wheels. Its # 8/9 out of my goldpan restorations.
Last post
Are the mismatched shocks on purpose or placeholders?
I seen that as well. Looks like T4 rears and Kyosho or Duratrax fronts.
