Hi all!
Looking for the above front wheels. They have been discontinued and are tough to find anywhere (including ebay). Does anyone know where I could find some?
Thx!
yokomo 870C、works91、93、yz10 have different rims,I have some white rims but lost label,so want to the part number of these wheels?any one can help thanks
1、this pair wheels I think it is 2 so may be fit 870C or US edition yz10,but is that front or...
Last post
#1 is ZC- 801 the 800 is 2wd narrow, #2 may be the 30's or the ZC 835, the Works 2.2 # I am not familiar with :oops: :wink: But the offset is different.
thanks for the helpful info! :D
Hey I had some Chrome proline wheels on my JRx2 back in the day I still have the 2 rears but badly scuffed up. I have done searching but cant come up with any replacements or part number anything, wondering if anyone has some or can lead me to some?...
hey guys, new to the forum and a new owner to a 10t black pan. I'm using the truck to whoop on some state of the art machines at the local track but it seems the tires are well past their glory days. Can I use T4 front and rear wheels such as these?
Last post
The offset of the rims have not changed in the entire run from the 10t through the T4.1- as long as you switch to the 3/16 axels your good to go-
i just received my order from tower hobby and i ordered front wheels for a b4.1 thinking they would fit my rc10 but they have the hex piece in the front and no spot for the bearings to go. i thought i read some where that the b4.1 wheels fit?
by the...
Last post
Why would anyone want to do the front hex conversion? You are stuck using trailing steering. I prefer inline.
I'm just playing around with the Idea but I'm considering trying to run a set of alloy rear wheels on the front wheels. I'm not trying to do a 4wd kit but could be open to the idea. Id like the car to be drive able after done.
im thinking if i cut...
Last post
well, back at square one. the seller was missing one of the axles in the set so I'm getting a refund :(
ill keep the b4 setup in mind until i find another set of axles that are cutoff at the end.