I now have available battery straps for my transverse shorty pack battery cups, printed in Nylon.
I'll make these available at Shapeways in the next day or two, but for now I have 3 available for immediate shipment. The price is $8 plus shipping....
Last post
The width is 1.86 , and the length is 3.80 .
I've run several brands of shorty packs in them and they have all fit nicely. 8)
I have a few older SCR type sub C packs that I would like to use in some shelfers, but they are showing signs of leakage. You know, crusty white junk around the shrink on the individual cells. Does anybody know what would work to either stop the...
Last post
Vinegar should break it up and remove it- total discharge should help prevent re-occurance I believe-
I can't believe how far the battery and motor technology has come. The sheer power and lightness is incredible. The field quick charger he uses was $2k by the time he bought a capable generator. I can't even afford the battery pack in this beast...
Last post
I wasn't sure if I was watching a giant dragonfly after doing a speedball or a helicopter caught in a f1 twister. Silly if you ask me.
I am wanting to run my rc10 with a 8.4 volt (7cell) NIMH battery pack and was thinking about buying a XPS micro esc #8023AE to go with it. Will this combination work? I read where I CAN NOT use the diodes described in the rc10 build manual to reduce...
Last post
I think that speed control is not what you are after for a 10th scale car as that is the stock speed control for a RC18t/b/mt If you want a speed control in that same basic size/shape you may want to look at one of LRP's speed controls like the AI...
Finally available! Now there is another option for mounting battery packs in the RC10, no drilling required!. These battery cups have the same look as the originals, but have an added boss on them that allows them to bolt in to the existing holes...
this was just put on golden years rc facebook page. romulus just received some nice pre-photos of the rc10 graphite box art car from the photographer that worked with chris chan. looks like they didn't settle with this body and did another for the...
Last post
looks mean in the last pick ... cool picts .. ive never seen the before edit shots
Not completely sure, but after three charge/discharge cycles it was holding strong. Discharged again, now charging the recommended 15 hours. Wonder how my old stick packs will fare....should probably be working on the chassis but have my geek on so...
Hey all,
Have used a set of calipers to measure the battery box within about half a mil
134.5mm x 47mm x 24mm
1) Has anyone found any lipo packs that fit?
Prefer hardpack/ROAR approved, but they all seem to be too big?
Yeah Racing 4000mah LP0042...
Last post
In my Pro SE I took my Losi hinged battery bar/box out of the front and replaced it with a Velcro batter strap (i used the same coutnersunk screws and put a hole in the velcro strap then used a washer and a nut on each side, and now combined with...
