Sanwa Dash R2 Modulation identify

[Libra]

Hi at all,

i have this Sanwa transmitter and it's working for 41 MHz.
The thing i don't know if this working in AM or FM modulation.
It's 41 MHz AM or FM? On the manual say is full AM band.
The Tx i have, are equipped with a 41.040 MHz crystal.

The crystal i find on the net, are all FM for the 41MHz.
And waht receiver are compatible with this Dash R2?



Thanks at all.

Libra

[Libra]

Anyone?

Thanks,

Libra

[GoMachV]

I have a sanwa dash but unfortunately there are no markings on the receiver, and nothing on the box mentioning the receiver. The receiver is all black with no label and has "dash" molded into it, so it is unique if you are trying to find the exact one. These are definitely AM. Any AM Airtronics, Cox, or Sanwa receiver of the pre 1991 era should work just fine so long as it's tuned for the same band as yours and has matching crystals.

[Libra]

Thanks so much Gomach.

Where i can find, a set of AM crystal for this tx (and rx)?
On the net i find a lot's of 41.040MHz crystal set, but all are only FM.

Thanks,

Libra

[Frankentruck]

I thought the frequency was 40mhz, not 41mhz. Maybe 40 is close enough?
.

[Libra]

Thanks Franken,

it's really 41MHz have a sticker on the remote.
It's working too with 40MHz set crystal?

Thanks again,

Libra