doldsen83 wrote: ↑Mon Jul 24, 2023 4:32 pm
This is the final setup. Rustler pipe and header, the exhaust blows under the chassis to the center.
The car is an animal to drive on the HPI Vintage tires, the Traxxas 2.5 is way to much for it, geared 24/58 and I feel like it is on par or faster than my Slayer Pro.
I have a set of normal low profile touring car tires I'm going to try on it, maybe then I can control it and stay in the throttle long enough to see how fast it is..
Yea I bet it’s a wicked lil machine rockin the 2.5 for sure
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Its been a while, but I finally got somewhat of a handle on this thing. Reducing the steering rate really helps tame the driving down along with tweaking the throttle linkage and getting used to it. The 2.5 has power to burn and is currently geared 24/58. The 24t clutch bell is the biggest I have been able to find so far, I just found a 56 tooth spur gear on Evil Bay so we will try that in the spring and see if we can get 50mph out of it.
:D Hi Everyone. Here is a thread on a project i started in December 2017. During the holidays I found a RC10 mid engine buggy conversion. Mind you, im not a buggy guy. It was a nice, clean and simple design with a few custom parts like the chassis....
Last post
Vary nice job,I really like the pantera body.
Thanks, it was the appropriate body for a mid-engine car
Holy Mother of Space Goats, Batman!!! That turned out awesome!
Nicely done!
HAHAHA Thanks...this was a cool project outcome i think....
First off I wish I was capable of posting pictures it would help a lot I know.
I got an old 1/8 with a Super Tigre. It has a large G with a X21 inside the G below that R.E.
On the other side of block it says.
MADE
IN
ITALY
Yes, i have looked into...
I've done a fair few OS engines which have come up really well, soooo, I thought I'd start a thread documenting the tear down and clean up of a nitro engine. I'd rather rebuild an OS but have this pretty rough Hyper .12 should clean up well. It is...
Last post
Hi RJ,
Great post!
Do you need to oil any of the parts?
Especially if you don't plan to run it straight away?
Like Alex said,
Learnt something new today!
I knew a Guy in Mt. Gambier and he flew model aircraft.
Hi, new here with a second-hand Schumacher Nitro 10 Mk3.
Engine is starting but not staying running - one issue for sure is fuel running back into tank after priming, if I quick it will run till I remove igniter.
I plan to investigate around the...
Last post
Will do. Hopefully the OP is getting something out of this since I’m starting to feel I high jacked the thread.
Hi, I was recently given a Schumacher nitro 10, and want to put a new engine in it, can anyone suggest one that is not too expensive? Would love some advice.
Last post
Have you considered a Radial engine. That will get you from A-B:)
Some of you might have seen this on other forums, some may not so I thought I'll post some here, sorry but no video on this, but I once ran it with a 1/8 scale Porsche 356? with Duratrax on road tires I estimated at least 70 mph or more anyways air...
Last post
Thanks, Sometimes I think I go too far. LOL
I painted with metalcast paint to give it that anodized look before I went with Moly-resin.
Some more before pics.
2 main inferno gears slapped together, 18 toothbells.
Well i finally took the Camaro out on the pavement. she is no longer relegated to the shelf. She performed well and i can say i didn't hold back.
I took a little footage
IsK58PJ1I6g
Last post
great pix. Thanx once again. I'm gonna have to hunt another one up for myself. Figured they would be around for awhile yet but then again...they were made for a vehicle that isn't around anymore :wink: