Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
I added a note to the first page.
I switched to CW rear hubs and B44 CVD's.
The bones were too long at 67mm.
I will get to the electronics on this soon.
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.
Supernaut wrote: ↑Fri Dec 08, 2023 10:19 am
I added a note to the first page.
I switched to CW rear hubs and B44 CVD's.
The bones were too long at 67mm.
I will get to the electronics on this soon.
I'm super curious - how does the graphite tub chassis perform on the track? Have you or anyone else raced one of these chassis?
I have never really seen a graphite chassis raced or even played with around my area. That begs the question regarding durability or longevity when compared to the tub chassis.
What are the advantages to the graphite chassis? Is it weight? Or...
Last post
Some people claim that the aluminum tub chassis is superior and cite the fact that Team Associated won the '93 IFMAR championships with them. As a direct rebuttal to that I'd like to point out that those cars had shorter suspension arms than the...
.........being deeply poisoned by this site for a long time..........& after getting a gold tub, A&L conversion not long ago........my next target is the graphite tub...........:)
lucky enough to get one in the bay at a reasonable price...
Last post
Nice!!, that's one of my target finds too, Did that chassis come from ebay in the last month?
I got this graphite tub around 3 to 4 months ago.........from valkyrie ........:)
Got a very nice fusion speed tub drilled for a stealth. Not totally sure on the direction of this yet, any suggestions? I'm going to fill the 2 little holes on each side of the chassis then seal it with lacquer.
I blew the dust off of one on my projects (actually, they don't really collect much dust, I open them up to review them and what parts I need to get the kit to 100%, or change things around)
I have about 15 different 'kits' of buggies on my to do...
So I started a while ago on this car and never finished it.
The chassis doesn't line up well with most bodies and it got sidelined for a while.
Anyways...
The chassis had been cut/carved where the front arms were touching the chassis on full...
Last post
I watch Andy's eBay listings but only see the painted bodies getting listed. I wasn't sure if there was a different retail source with a set price. Wishful thinking.
He had some clear Pro Arrow and Renegade bodies listed a while back.
This project started when I received a darn nice graphite chassis except for the fact that the front of the chassis had been cut on the ends of the nose. So much that only half of the outer holes for the a-arm mounts were there :evil: So i dug into...
Last post
Very nice, ballsy to run those arms though-
I do have a set of the dynotech arms, I may change them. The arms are actually not as nice as they appear in the pictures. Someone took a dremel to the shock area for clearance :evil: