to everyone keeping this board up, it helped me a ton getting back into the hobby. pretty much the same story as most others. got a rc10T new back in 92. never had the money to really go racing at my local track. good batteries and a good motor...
Last post
took the old girl to a local track today. I forgot how bad hard dried out clay is for traction. wow... but at least I didn't break anything besides a body mount and it looks better with some red dirt on it haha
Just wanted to say hi, my name is Jon and I am from Liverpool in the U.K.
Only really have B4's at the minute but have been racing them for years. Prior to the B4 I raced nitros for a while before going electric.
I was tempted to buy one of the...
I recently picked up a rattle can from Tamiya called Lame flake, the top says paint black over the top, so is this just clear with flake or black flake like the paint can top suggests? Getting nothing from the Tamiya site.
Last post
$ 15 for a can, good news it can be used with any color you like. It was easy to use and make look good, 2 light coats and on with the color, I'll try to post the finished body as soon as I get it mounted up. Thanks for your help.
hello ! can i charge this brand new 3600 nimh pack 0224012332 .jpg
with THIS very not brand new kyosho nicd auto peak charger ? 0224012333 .jpg
i have been using it to charge my old nimh packs, and it seems to work fine, but i wasnt very worried....
Last post
I would charge them on something newer just to be sure you don't shorten the life of the cells. The delta peak setting is very important with NiMh cells, it can make or break them.
I have a RC10GT and I need to get replacement front axle nuts but the manual is not clear on the size I need to get. I can't find them locally so I have to order them, so are they 6-40 or 5-40, the manual shows both as the size.
Last post
And don't over-tighten them. The threaded section will snap off.
I've got two gold pan rollers, for restoring one car. One of the rollers is in terrible shape; some one did a bad job making their own stealth tranny holes, and there really isn't much to use for good parts.
Did AE anodize their...
Last post
Good to know - thanks. I've used soft scrub on both the anodized aluminum and plastic parts, and I noticed that it can rub the anodizing off it's it's continuously scrubbed in one spot. I won't use either on the aluminum parts now . . .
Just got my ce rc10 in the mail that I won on ebay and have a quick question. I noticed that the dog bones are trying to come out of their sockets sometimes when i pick it up. Could this be a worn out spring or is this just a 'common problem'?
I...
Last post
im running the 3/16 axles conversion AE list on their site.i decided to go with rpm rear bearing carriers since i already had the fronts rpm.
you can only use the special rpm bearings though
Has anybody put the posi lock GT2/T4 system on a 10T will it fit ?
Thanks
Last post
His truck is in the f/s section here:
but you have to have access to the b/s/t area to see it. From his description here are a few lines of what it has.
rpm black body mounts
rpm 2.6:1 trans conversion w/t4 shaft and trinity light weight t4...