Evening all. I have upgraded my 6-gear rc10 to the andys wide arm setup, still using the small shocks.
I am running 35wt oil and A silver short spring with the kit piston. I am running the standard shock tower (one position)
The problem is that...
Last post
I would use thicker oil and/or a heavier piston. RC10 pistons are 1-3, lightest to heaviest.
I have a car with 0.56 shocks and Andy's arms. It has silver springs, #2 pistons, and 30 weight oil. I wouldn't use it on big jumps but it seems fine for...
I came across these RPM front arms and have not seen any like these before. Did RPM make arms that would be a replacement for the Andys pro race arms? They do not fit a 10T bulkhead but are the same length as the worlds arms and the pro race arms....
Last post
The RPM arms would be short on a Pro-Race front end but maybe you could use GT axles to bring the width back out.
Option #2 is B2 Carpet arms...which are longer than Andy's Pro-Race arms but should work with B4 wheels. Problem with those is the...
Anyone using soft packs for your personal use ( i.e. non organized racing) at home, backyard, park-type casual running. Would I REALLY be taking a chance?
Last post
Thanks guys. That's that's what I was thinking... how much can happen to it in the centerline of a 1/10 buggy? For now (not racing organized) I can ease into lipo w/ cheaper soft packs. I'll pickup a hard case for the race car when get ready to race...
Anyway, I have ended up with a SC10B from a work mate with a broken front arm. He bought it from our shop a few months ago and proceeded to turn it partially into a canoe after 8 batteries on his front yard...
Last post
Update on this: I haven't butchered my RPM parts yet, as the importer here reckons they will have the genuine parts in this week.... We will see.
The later AE arms for the 10T, GT and T2 have the spacer for adjusting the wheelbase. The early AE white arms and the RPM arms dont. My question is lined up next to each other is Does the RPM arms line up with the short or long position or are they...
all parts on the build are andys all the way including the body, but i did use a&l steering and a a&l rear shock tower. wanted to do this one for a while and it came out very nice :) DSCN4162.jpg DSCN4163.jpg DSCN4164.jpg DSCN4165.jpg DSCN4166.jpg...
Last post
I was going to buy the exact same body from E-bay,
Ahrefs [Bot],