Well ive been a tad busy for some time but did manage to get a few items done, rear ball joints done, shocks fitted, front steering ball joints done and shocks fitted but now to rethink on how to do ball joints at the very front.
Designer of the Lazer ZX / ZXR Tub Chassis (now available again from Fibre-Lyte)
I haven't posted the full build here as didn't want to distract from the true geniuses behind the concept of using a front Stealth gearbox to make a 4wd converted RC10. Jeff and Mini.
Anyway, I've made my own version using Optima Mid front arms,...
Last post
How is the car coming along? I was able to build up a similiar style car with a few changes to the front support for the shocks. I took it to my local track and I handled better than I could have hoped. Thank you for your posts and information. I...
I don't know how many folks took advantage of the sale on the mini b race rollers but I did.
I'm starting this thread to put some information out there, and for others to add what they learn to it.
If you have thing to add please do.
The Mini B...
Last post
Cool buggy just wish there was more of a carpet tire selection
There are different RC10 4WD conversions in the past.....but the prices are terribly high which I am not able to afford any one of them now......so I decided to build my own one instead...... :)
Choosing the front gearbox is troublesome.......with...
Was anyone into Mini Z's back in the day so to say? I remember racing all hours of the night many a night. We got pretty good to the point where one crash into the barrier would cost you the race. Anyone who has raced mod Mini Z on an RCP track...
Last post
I have a few. I'd get more, but the prices are usually kinda high. Our new basement is much bigger than the old one, so I'd like to set up a nice flat oval eventually. The mini Z's are just the right size. (and the Losi 1/24 vehicles we've got)
so long story short, bought my 3.5 year old a cheap rc and i got an ecx smash (mini t) so i could play with him.
why so slow!
i mean slow, slow. faster then his $20 el cheapo but still, s l o w.
i know i'll need lipo and brushless along with a...
Last post
I find the mini tierod ends to be the source of sloppiness, Mine got so bad I used a tiny piece of paper over top of ball stud before pushing on rod end. it worked decent but wasnt a long term solution. Anybody have a source for decent mini rod ends?
Got a few runs under my belt with my new M-03 Mini.
What a blast of a car!
Even more,when I bolted in a Reedy MVP 27 turn stock motor...When I took the body off,the inside of the body and the front of the chassis was covered in rubber from the...
Last post
Right on-I've already bought a pair of universals and am just waiting for them to arrive.
I'll try a Robinson pinion and see if that'll shut it up some... :roll:
Anybody here into Mini Z racing? We have a bunch of guys who meet every Wednesday night for a bit of racing in a industrial building. There are about 14 of us and we all pitched in $100 each to buy ourselves a couple of Kyosho Mini Z tracks which we...
Last post
come on over!lol
here is a link to my club's sight.
i know were a bit far but, you can check out the other cars anyway.