NIX91 Questions and Answers

[m_vice]

Great moment for me to decide to pop up and take a look at the Talk. This is amazing guys, great job.

[slow_jun]

Unfortunately I do not have a "racer kit" so to speak. I sure wish I could accommodate everyone but it is just not feasible since I am doing all the kit work by myself and time is not exactly on my side since I also have a normal day job as well.

The race parts will follow shortly since I am finishing up the final kits now.

Jake

No problem Jake, Thanks a lot for taking the time to do this Kit for everyone to have .

[tiger1]

Hi:

What was the meaning of (on the other URL http://www.rc10talk.com/viewtopic.php?f=99&t=36418 ): "CNCRC-004 - Aluminum Chassis Stand Off (4pcs) (Non-tapered)"

Non-tapered? Non-tapped?? Or it meant the posts are straight sided??

Please advise.

Thanks in advance

[Seabass]

The stand off are tapped 4-40 top and bottom. The standoffs do not have a taper machined into them meaning they are straight sided. The original car had tapered chassis standoffs which can easily be done in a lathe. I did not do the machine work on the taper simply because if the time it takes and the quantity I needed.

Jake

[tiger1]

thanks Seabass

[Seabass]

Guys I ordered enough small pattern nuts to include in every kit to correct the minor issue we identified with the SLS steering bell cranks.

Jake

[tiger1]

Seabass: you could be my son-in-law!!!

[slotcarrod]

Seabass: you could be my son-in-law!!!

Hmmmm? Another South East fling? I would send pics of her to Jake now!

[Seabass]

Rod you are hilarious....

[askbob]

[Mark Westerfield]

Since the original had 30 degrees of chassis kickup, will there be a 2nd chassis and bulkhead for the Nix91 with 30 degree in the future?

And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?

[badhoopty]

wow... what a nice thing to come back to the board after another leave of absence. this is rad.

[Seabass]

Undecided on the other chassis and bulkhead right now, it is a possibility.

Jake

[JPAE07]

wow... what a nice thing to come back to the board after another leave of absence. this is rad.

X 2

[Niki]

And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?

Sorry, I can offer only DIY version of my pancar project stickers...
https://dl.dropboxusercontent.com/u/31381524/NIXconcepts_NIX10LC_600dpi_A4.jpg