belt driven belt drive

The place for all things Kyosho.

Moderators: scr8p, klavy69

adam lancia
Approved Member
Posts: 1116
Joined: Tue Feb 05, 2008 6:37 pm
Location: Donkin, Nova Scotia, Canada
Has thanked: 7 times
Been thanked: 41 times

Re: got my lazer out tonight

Post by adam lancia »

Paul, all the front belts for the Lazer series are the same length except for the ZX-S versions (not the sport version of the ZX-R, the later version before the ZX5 came out). As long as they`re actually Lazer belts, they should fit...

isobarik
Approved Member
Posts: 616
Joined: Mon Sep 22, 2008 5:09 am
Location: Sweden
Been thanked: 10 times

Re: got my lazer out tonight

Post by isobarik »

you can also get them from beltcorp in us and minimum order is 20-25 dollars and i think that they where like 1 dollar each and kevlar reinforced.

mvh Isobarik

Kyosho Fan2
Approved Member
Posts: 320
Joined: Mon Nov 26, 2007 3:39 pm

Re: got my lazer out tonight

Post by Kyosho Fan2 »

isobarik wrote:Damn those tubs are super sexy.....and red belt...like looking at nice as* i an thong .... :mrgreen:

mvh isobarik
well i designed the first and now im trying to locate it as i sold it in weston super mare. Its one of a kind and no other was made like it. Higher side walls and six cell holes, and was designed due to Jason Green standing on my car whilst fighting for pole and he was marshalling. He broke my esc and was the reason why i designed the tub for protecting the electrics.

Also the buggies look sweet, hope you enjoy beating the newer cars

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: got my lazer out tonight

Post by treehugger »

so i finnaly got back to some kyoshoing this week two days till midnight and i almost finished two chain drives and my zx lazer which is my favorite car i think i like it more than the cr version .
this zx came to me as broken the chassis was in good condition but it was (is still missing a rear arm ) and it took a big front end hit which took out the front gear case .
so i put some Ti buckles and fitted a one way slipper and a front ball diff Ti hinge mounts and a nice motor plate

Paul
Attachments
001.JPG
002.JPG
003.JPG
004.JPG
006.JPG

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: got my lazer out tonight

Post by treehugger »

and i finnally got around to putting on my Ti hub mounts on my com com
Attachments
009.JPG
008.JPG
007.JPG

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

so i installed the electrics and put some rubber on them i bit the bullet and got the narrow fronts :shock: not thinking about tires for now but i did get a original double wing from fire-boy he has been steadily dropping his price on them so TBG i have been dicking around with them to get the body i have the wing so i asked him for a deal on the tray and combine shipping so i got the deal and hit the pay now FULL PRICE i cant spend 20 bucks on shipping so i dont know whats going on i only started this zx cos he was producing the bods and mar-wan the decals i hope i dont get stuck without some cloths fir this beautiful car
oh and im on the hunt for the FRP towers (LAW1)

Paul
Attachments
001.JPG
002.JPG
003.JPG
004.JPG
005.JPG

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

so this is the paint im going to do a nice box art pics are of a marwan car

Paul
Attachments
P_page_013.jpg
P_page_012.jpg

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

so im getting the run around with TBG i sent the email with the quote for the body and tray minus the crappy wing that comes with it saving 7 bucks and this is nearly a week after hitting the Bin and i got an email through eBay saying that TGB was declining to take my order for the tray but i could have the body so i declined the offer and said i didn't want one without the other . so who else is producing a zx shell and tray ...anyone
Paul

Jay Dub
Approved Member
Posts: 1136
Joined: Tue Jul 29, 2008 1:04 am
Location: San Jose, Ca.
Been thanked: 1 time

Re: one ZX down two to go

Post by Jay Dub »

I've got your FRP towers. How many sets do you want? Thay are NIP btw. -Jeff

isobarik
Approved Member
Posts: 616
Joined: Mon Sep 22, 2008 5:09 am
Location: Sweden
Been thanked: 10 times

Re: one ZX down two to go

Post by isobarik »

Doesent marvan make the zx body ???

mvh Isobarik

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

i wish one stop shopping all packaged with decals mm ....no he was talking about it i will be getting the decals from him
i finally sorted out the TBG thing so i should have my new zx shell and tray here in a month or so :shock: :lol: still cant get that canada US post thing i have held off the final trimming and fitting of the double wing untill the bod gets here
so im working on the towers im hopping to get another set for my sport it seems strange to put new platinum shocks on some alloy towers instead of CF

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

so these came today
Image
Image
we will see they seem alot thinner than i thought

Image
[/img]

bdrmbully
Approved Member
Posts: 398
Joined: Mon Feb 18, 2008 3:54 pm
Location: toronto canada

Re: one ZX down two to go

Post by bdrmbully »

i heard that about his body's hence the reason i buy from marwank.
2nd place is just the 1st loser

treehugger
Approved Member
Posts: 1304
Joined: Tue Dec 08, 2009 10:10 pm
Location: seattle washington

Re: one ZX down two to go

Post by treehugger »

bdrmbully wrote:i heard that about his body's hence the reason i buy from marwank.

well marwan has not produced the zx yet or i would have when he gets back from one of his many holidays :shock: :roll: :lol: he said he will send me the decals but after spending an hour on the body today i might just change bodys i think it will let down the build the lazer range were never skimpy on the lexan so i want it to be as crisp as the original double wing

User avatar
GJW
Approved Member
Posts: 2325
Joined: Mon Oct 15, 2007 7:22 pm
Location: AUSTRALIA!!
Been thanked: 1 time

Re: one ZX down two to go

Post by GJW »

bdrmbully wrote:i heard that about his body's hence the reason i buy from marwank.

marwank :lol: :lol:

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Help! OLD Belt Driven RC w/Losi body
    by iloveyourface17 » » in Kyosho Forum
    10 Replies
    1307 Views
    Last post by mrlexan
  • belt conversion for chain driven optimas?
    by Charlie don't surf » » in Kyosho Forum
    33 Replies
    3798 Views
    Last post by Kyoshojoe
  • Belt driven AYK Radian and a cool Bobcat
    by AYKBOBCAT » » in AYK Forum
    11 Replies
    1549 Views
    Last post by JHarris
  • TrackMaster X Caliber Direct Drive & Belt Drive trans
    by jcwrks » » in RC10 Buggy Forum
    1 Replies
    888 Views
    Last post by LaserRC10
  • RC Carbon works belt drive and direct drive transmissions?
    by firebird1999us » » in RC10 Truck Forum
    3 Replies
    1607 Views
    Last post by blubblood
  • Cougar drive belt
    by Danf1275 » » in Schumacher Forum
    7 Replies
    1624 Views
    Last post by Danf1275
  • MX-4 Front Drive Belt
    by Wazza22 » » in Yokomo Forum
    1 Replies
    659 Views
    Last post by Marshky
  • rc10 belt drive
    by 17nut » » in RC10 Buggy Forum
    6 Replies
    1247 Views
    Last post by rc10johnny

Return to “Kyosho Forum”

Who is online

Users browsing this forum: No User AvatarBing [Bot] and 4 guests