gearing

Moderators: scr8p, klavy69

2 posts • Page 1 of 1

muck: Approved Member; Posts: 119; Joined: Sun Oct 10, 2010 8:11 pm; Location: Grand Rapids MI

gearing

Quote

Post by muck » Sun Jan 09, 2011 12:10 am

ok more from me..
i am sticking with the 32p gearing. I modded my VXL rustler to 32P gears to prevent stuck sand and flat out stronger gears.

I plan on using about a 8.5t motor on 2s lipo.
Does any one have a suggestion to what pinion size to use with my 54t spur?

Also where do i find that CF triangle shaped battery hold down strap i see in soo many pics..

thanks

klavy69: Moderator; Posts: 5151; Joined: Thu May 29, 2008 4:11 pm; Location: Fulton, IL (Land of one stop light but we DO have a windmill!); Has thanked: 569 times; Been thanked: 269 times

Re: gearing

Quote

Post by klavy69 » Sun Jan 09, 2011 12:52 am

muck wrote: Also where do i find that CF triangle shaped battery hold down strap i see in soo many pics..

thanks

I believe thats an atlas part you are talking about. He is repro-ing them and usually has them on ebay or in the b/s/t area when he has a batch on hand.
Todd

Peace and professionlism.....Kabunga signing off!!!

Post Reply

2 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

gearing help please ????

Last post by styarr « Wed Jun 27, 2012 6:09 pm
Posted in RC10 Buggy Forum
Replies: 2
by styarr » Wed Jun 27, 2012 1:42 pm » in RC10 Buggy Forum

First post

i have a b3 with a 78t 48dp spur gear and a 17t motor, what would be a good tooth pinion for a typical park track please ???? :shock:

Last post

thats great thanks, iv been running a 20t and it just cant cut it anymore

2 Replies

541 Views

Last post by styarr
Wed Jun 27, 2012 6:09 pm
21.5 gearing?

Last post by ca-rj « Tue Apr 22, 2014 5:35 pm
Posted in Temple's RC10 Tech Forum
Replies: 5
by ca-rj » Wed Apr 09, 2014 1:30 am » in Temple's RC10 Tech Forum

First post

I'm back for another gearing question. I recently bought a 21.5 for my son's CE with Stealth and have no clue how to gear it. Any suggestions?

Last post

Currently at 30/69 and it is just about perfect. Car is peppy but not too fast. I'd highly recommend this to anyone who has kids who are learning.

5 Replies

1191 Views

Last post by ca-rj
Tue Apr 22, 2014 5:35 pm
I need some help with gearing

Last post by JK Racing « Mon Feb 10, 2014 11:09 pm
Posted in Temple's RC10 Tech Forum
Replies: 16
by NickTheGreek » Wed Jan 22, 2014 7:49 pm » in Temple's RC10 Tech Forum
1

2
First post

Someone please help a brother out with some understanding about gearing (and motors)

I had been out of the hobby for like 25 years....n in the past 2 months, how else can I put this....Im freakin hooked.
2 months ago I hadn't thought about an rc...

Last post

Your running 23*81 now...I wouldnt go over 27-28 tops (hits your 3:1 ratio), or drop to a 78 and do 26-27 tops.

Heck, if your feeling dangerous, try a 30...BUT ::warning:: if something lets out the magic smoke...I told ya so!!

Its all for fun,...
16 Replies

5721 Views

Last post by JK Racing
Mon Feb 10, 2014 11:09 pm
Gearing help

Last post by mark in wi « Wed May 02, 2012 11:07 am
Posted in RC10 Buggy Forum
Replies: 6
by mark in wi » Fri Apr 27, 2012 1:23 am » in RC10 Buggy Forum

First post

I was wondering if you would be able to help me gear my rc10. I have an A stamp 6 gear from the mid 80's with a newer Ready stock motor, Novak t4, and b3 wheels. I hope to run a lipo to race with but might have to drop back to a 6 cell. I was also...

Last post

Well I picked up a 81 tooth pinion and a set of pinions (16,18,20,22,24,26) so I should be able to get close. I will let you know how it works out.
Thanks again
Mark

6 Replies

882 Views

Last post by mark in wi
Wed May 02, 2012 11:07 am
What gearing?

Last post by geeforce59 « Sun Jan 02, 2011 1:44 am
Posted in RC10 Truck Forum
Replies: 1
by joel45acp » Fri Dec 24, 2010 10:40 pm » in RC10 Truck Forum

First post

I have an RC10T3 running 3k NiMH packs and a Novak 610 RV ESC and recently aquired a Trinity Ti 9x2 mod motor. What gearing would best fit this truck for bashing, racing, and just messing around? Thanks in advance. Hope you gents have a wonderful...

Last post

i dont recommend you to use that 9x2 modified motor for your T3 truck......its over kill for bashing.

Just stick on the 17turns speedgems brush motor lots of fun, speed and run times!

Happy New Year!

1 Replies

331 Views

Last post by geeforce59
Sun Jan 02, 2011 1:44 am
Gearing a 17.5T BL

Last post by JK Racing « Sat Aug 16, 2014 2:54 pm
Posted in Temple's RC10 Tech Forum
Replies: 30
by joel45acp » Thu Sep 29, 2011 5:39 am » in Temple's RC10 Tech Forum
1

2

3
First post

Hey gents, I know this is a loaded question, but what are you guys running on your 17.5T BL for gearing? I currently have an EZRun 17.5T 2400KV motor and a HB35A ESC running a Gens Ace 4K 30C battery. The track I run on is relatively large and...

Last post

messing with gearing last night, Novak Ballistic 17.5, full timing, geared 32/72 - mucho speed and came off after a 6 minute race at 120 degrees.
30 Replies

6219 Views

Last post by JK Racing
Sat Aug 16, 2014 2:54 pm
Gearing suggestions on Yz-10

Last post by Justjoe « Fri Nov 11, 2011 12:28 am
Posted in Yokomo Forum
Replies: 7
by DJGonzo69 » Tue Nov 08, 2011 1:15 pm » in Yokomo Forum

First post

Hi All,
Just wanted to know if yu guys have any gearing suggestions on the YZ-10 if using a 17.5, 10.5 & 5.5 Brushless motors. Also what is the gear ratio of the Yoke is is 2.25?
Thx,
John

Last post

The early YZ10 was 2.33. Mine came with the 35 tooth diff and 15 tooth center pulley. Not too sure what the 91/93 works cars came with.

7 Replies

1002 Views

Last post by Justjoe
Fri Nov 11, 2011 12:28 am
Silver Can Gearing

Last post by Lonestar « Fri Aug 19, 2011 12:02 pm
Posted in Vintage Electronics
Replies: 5
by SoloGraphix » Wed Aug 10, 2011 12:42 pm » in Vintage Electronics

First post

I am prepping a Losi JRX Pro with the XX Retrofit trans for a vintage class at my local track. We are allowed to run period correct tires with a tamiya 540 silver can. So with my 2.19:1 trans & stock Losi tires on the yellow dish wheels, what can I...

Last post

The water dipping trick yields vary various results... do it carefully, and get a few spares to experiment with ;)

Paul

5 Replies

1454 Views

Last post by Lonestar
Fri Aug 19, 2011 12:02 pm

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 2 guests

gearing

gearing

Re: gearing

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online

Login Register