B3 rear arm mount question
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
B3 rear arm mount question
For those whom know....I have already ordered a couple replacement sets (hoping the B2 rear mounts are the same!!)...as I am cleaning up my B3, I noticed the rear mounts 'say' different things. R3/3 (I know this is 3 degrees in, 3 degrees squat), but the other says L2....
I am sure they are mismatched, hoping not, but fear the worst...
I am sure they are mismatched, hoping not, but fear the worst...
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: B3 rear arm mount question
here you go joey...
9266 B3/B2/T3 REAR SUSPENSION MOUNTS, 2° toe-in (per side)
9267 B3/B2/T3 REAR SUSPENSION MOUNTS, 3° toe-in (per side) and 3° anti-squat
9268 B3/B2/T3 REAR SUSPENSION MOUNTS, 3° toe-in (per side) and 0° anti-squat
page 8
http://www.teamassociated.com/pdf/discontinued_items/drawing_b3.pdf
9266 B3/B2/T3 REAR SUSPENSION MOUNTS, 2° toe-in (per side)
9267 B3/B2/T3 REAR SUSPENSION MOUNTS, 3° toe-in (per side) and 3° anti-squat
9268 B3/B2/T3 REAR SUSPENSION MOUNTS, 3° toe-in (per side) and 0° anti-squat
page 8
http://www.teamassociated.com/pdf/discontinued_items/drawing_b3.pdf
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: B3 rear arm mount question
one other thing joey, hopefully you don't get a pack of the early b2 #9265 3 degrees rear suspension mounts. those are drilled for 4-40" screws and requires the earlier b2 rear chassis plate (#9240). all the later b2/b3/t3 suspension mounts all come drilled for 5-40" screws. the rear chassis plate (#9241) for the buggies and truck were updated too for the larger screws.
this might also be true too for the earlier b2 #9266 2 degrees rear suspension mounts. be aware of that when buying a pack of sus. mounts.
this is the supplement that came with the rear sus. mounts when they made the change over...
![Image](http://farm8.staticflickr.com/7493/15928665312_d0b2e49e16_b.jpg)
this might also be true too for the earlier b2 #9266 2 degrees rear suspension mounts. be aware of that when buying a pack of sus. mounts.
this is the supplement that came with the rear sus. mounts when they made the change over...
![Image](http://farm8.staticflickr.com/7493/15928665312_d0b2e49e16_b.jpg)
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: B3 rear arm mount question
Glad I ordered a couple sets of 9267's from Tower
should be here Thursday....Thanks Rob!
![Smile :)](./images/smilies/icon_smile.gif)
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: B3 rear arm mount question
Looks like you may have a mismatch. Try to get 9267 and use the washer.
B2 mounts are hard to find. 4-40 screws and less material on the top for the rear screw to go in. These mounts are gold! The chassis plate can accommodate the 4-40 or 5-40 screws with no modification. If you do have the 4-40 version, please do not use them.
B2 mounts are hard to find. 4-40 screws and less material on the top for the rear screw to go in. These mounts are gold! The chassis plate can accommodate the 4-40 or 5-40 screws with no modification. If you do have the 4-40 version, please do not use them.
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: B3 rear arm mount question
On towers website? But its the part number above.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Re: B3 rear arm mount question
check rc10 .com
9268 on clearance at associated
http://www.teamassociated.com/parts/details/9268/
plus rear arms for cheap
http://www.teamassociated.com/parts/details/9258/
same as a new motor plate.
http://www.teamassociated.com/parts/details/9245/
nevermind jk/ didnt see you started the thread, but info or links for other b2/b3/t3 owners
9268 on clearance at associated
http://www.teamassociated.com/parts/details/9268/
plus rear arms for cheap
http://www.teamassociated.com/parts/details/9258/
same as a new motor plate.
http://www.teamassociated.com/parts/details/9245/
nevermind jk/ didnt see you started the thread, but info or links for other b2/b3/t3 owners
Re: B3 rear arm mount question
A b3 too? My b3 is easily my favorite race car.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: B3 rear arm mount question
who, me? nah...I wouldnt have a B3 being built....no way, not this guy
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: B3 rear arm mount question
Rod, the parts I got from tower are 5/40 for the B3. On tower it is listed as a B2 rear mount.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: B3 rear arm mount question
Yea it was always a B2 part first, but it was updated just like many of AE's parts, it kept the same part number and description.JK Racing wrote:Rod, the parts I got from tower are 5/40 for the B3. On tower it is listed as a B2 rear mount.
If you ever find 4-40 ones, lmk!
![Wink :wink:](./images/smilies/icon_wink.gif)
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- dldiaz
- Super Member
- Posts: 796
- Joined: Thu Apr 01, 2010 11:21 am
- Location: San Antonio, TX
- Has thanked: 14 times
- Been thanked: 34 times
Re: B3 rear arm mount question
I run a couple B3's myself, would love to hear any setup tips you guys come up with!
I recently cracked a front shock tower (ran into a Monster Truck...),
I ordered a Fiber-Lyte CSC tower with the cross-brace - I'm actually installing it tonight!![Laughing :lol:](./images/smilies/icon_lol.gif)
I recently cracked a front shock tower (ran into a Monster Truck...),
I ordered a Fiber-Lyte CSC tower with the cross-brace - I'm actually installing it tonight!
![Laughing :lol:](./images/smilies/icon_lol.gif)
-dldiaz
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: B3 rear arm mount question
I really should have a build thread, but I didnt take many pictures. Slinging paint tonight, putting my purple down on lexan.
I'm starting with #2 - 32.5 green, #1 - 30 silver - front/rear. Geared 33/69 with a 17.5 (blinky). Tell you more after this weekend.
I'm starting with #2 - 32.5 green, #1 - 30 silver - front/rear. Geared 33/69 with a 17.5 (blinky). Tell you more after this weekend.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
-
- Approved Member
- Posts: 299
- Joined: Thu Feb 28, 2013 9:00 am
- Location: Den Haag, The Netherlands
- Has thanked: 35 times
- Been thanked: 10 times
Re: B3 rear arm mount question
glad to hear that there are folks running B3's!
Wil follow the thread with interest!
Your setup, witch grip-level would that be?
@ dldiaz: pictures of your new tower would be nice...![Cool 8)](./images/smilies/icon_cool.gif)
Wil follow the thread with interest!
Your setup, witch grip-level would that be?
@ dldiaz: pictures of your new tower would be nice...
![Cool 8)](./images/smilies/icon_cool.gif)
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1028 Views
-
Last post by RcMonk
-
- 1 Replies
- 602 Views
-
Last post by littleVETTE
-
- 5 Replies
- 1331 Views
-
Last post by prp
-
- 8 Replies
- 1317 Views
-
Last post by yellowdatsun
-
- 7 Replies
- 922 Views
-
Last post by templeofspeed
-
- 3 Replies
- 727 Views
-
Last post by blubblood
-
- 4 Replies
- 507 Views
-
Last post by Lowgear
-
- 10 Replies
- 1509 Views
-
Last post by cowsrneat2002
Who is online
Users browsing this forum: No registered users and 1 guest