Carlsson

Post by **Fun41** » Tue Jul 03, 2018 8:01 pm

I had a friend station over sea's in the late 80's. Not sure if the 1/10 scale was still being make.

Post by **Fun41** » Thu Jul 05, 2018 7:30 pm

More of my Carlsson collection

Post by **Fun41** » Thu Jul 05, 2018 7:35 pm

Post by **Fun41** » Tue Dec 25, 2018 7:45 pm

Look what I got for Xmas. Never had a 1/12 scale car, but since it was a Carlsson I just had to get it. Did not take time to clean anything up before taking these pictures. I know from looking at other 1/12 Carlsson cars that the base for this car should look just like the larger scales but who ever did this was really good. Lots of missing parts, but with body and motor and look at all the tires. And don't forget the manual. Happy Holidays too all

Post by **Fun41** » Wed Feb 19, 2020 7:43 pm

Shorty after getting my 1/12 scale Carlsson I was able to get what looked like a Beginner or a pro 80. With all the parts I have I was sure that I could do something with it. As it worked out I had most of the parts to make a pro 80 (even a body from Carlsson with pro 80 stamped on it) but I wanted to make a beginner because it didn't look like my viking. I'm almost done working on it but here is what I got.

Post by **Fun41** » Mon Feb 24, 2020 7:56 pm

Here are some pictures of work that needed to be done on this car. Removed all paint from wheels and put on new tires. The Leo engine did not turn over and had no carb, but an old OS 21 worked great, and a couple of days cleaning and the engine fired up. Needed to make new engine mounts and redo the rear axle (the one in the car had a 3/4 spacer on it) by putting threads and nut on the end. Replaced just about everything on the front end. Changed the rear bumper but left the front on because of the body that came with the car works great. Working on a radio tray now from a Viking with gas tank.

Post by **coxbros1** » Tue Feb 25, 2020 7:08 pm

Nice work!

Post by **romulus22** » Thu Feb 27, 2020 7:32 pm

coxbros1 wrote: ↑Tue Feb 25, 2020 7:08 pmNice work!

I concur. Please keep posting pictures. I never get tired of old 1/8 nitro on road cars.

Post by **Fun41** » Sun Mar 01, 2020 12:54 pm

At this point I've done all I can to make this car look like a Beginner with he parts that I have. Made the opening larger around the engine for the air cleaner and put the wing on , added old type servo's and linkage.

Post by **Fun41** » Wed May 13, 2020 7:53 pm

I wanted to put my four wheel drive system on my off-road car for years, but just realized it is for a on-road car, So here it is.

Post by **Fun41** » Fri May 15, 2020 8:03 pm

With the four wheel drive on the car I had to change the body also. I replaced the Viking sport with a Mercedes 450 SLC I had . Also put the roll bars on both my cars at the same time.