First sorry for the English but I am French
![Smile :)](./images/smilies/icon_smile.gif)
This is my first thread on RC10Talk and I choosen to present you my Samurai build.
I bought 2 models plus some NIP parts as some where weared on both
![Sad :(](./images/smilies/icon_sad.gif)
Here we go :
Polishing the FWD plate
![Image](http://img15.hostingpics.net/thumbs/mini_733222P1090637.jpg)
![Image](http://img15.hostingpics.net/thumbs/mini_923286P1090641.jpg)
![Image](http://img15.hostingpics.net/thumbs/mini_613772P1090649.jpg)
The shocks are long to polish as there are many corners
![Image](http://img15.hostingpics.net/thumbs/mini_173685P1090657.jpg)
As per manual I started with FWD diff with some NIP parts
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160413.jpg)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160410.jpg)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160412.jpg)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160415.jpg)
The FWD diff is NIP
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160411.jpg)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160416.jpg)
Done but something is missing between FWD and rear
![Smile :)](./images/smilies/icon_smile.gif)
Previous diff is cracked near little black scerws. Do not tighten a lot.
It will stay on a shelf as it is very weak but I put a correct era option: ball bearings
![Smile :)](./images/smilies/icon_smile.gif)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160421.jpg)
FWD is done :smoke:
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160419.jpg)
It is not so easy to build the FWD as there are a lot of parts going into others.
Almost finished with genuine mechanical speed controller and associated lots of wires
![Smile :)](./images/smilies/icon_smile.gif)
The two halves chassis are NIP as all were broken at shocks or rear diff attachements.
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160512.jpg)
The driver:
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160511.jpg)
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160510.jpg)
I couldn't install the BIGGG ACOMS receiver and the driver. Maybe that's why the driver was not there when I bought the buggy.
![Image](http://i86.servimg.com/u/f86/15/91/83/96/20160513.jpg)
Instead of doing 100% box art I added a touch of green.
![Image](https://i62.servimg.com/u/f62/15/91/83/96/p1090810.jpg)
![Image](https://i62.servimg.com/u/f62/15/91/83/96/p1090811.jpg)
It is was a very nice model produced by Marui. One of the most beautiful of RC in my opinion with the Scorpion and the Javelin
I hope you will like it also.
See ya...