Lowgear wrote: ↑Sat Apr 20, 2024 3:30 am
Hopefully it doesn't become a permanent addition. I've noticed other sites using it over the past few weeks so maybe something is going on.
TRX-1-3 wrote: ↑Sat Apr 20, 2024 6:14 am
It's a PITA that takes me longer to get in here! But I understand.
You're maybe seeing a different filter that you have to interact with? This latest one I had to put in place is just for US based traffic, and requires no user input.
TRX-1-3 wrote: ↑Sat Apr 20, 2024 6:14 am
It's a PITA that takes me longer to get in here! But I understand.
You're maybe seeing a different filter that you have to interact with? This latest one I had to put in place is just for US based traffic, and requires no user input.
Nah, it's justa musta "ensure I'm not a bot" whirlpool thinker swirl that delays entry. It's really not an issue, just delays me from reaching my precious from 5-15 seconds. VPN or not. Anything to protect the site, seriously, I was being a bit of a smartarse.
Lowgear wrote: ↑Fri Apr 19, 2024 11:30 pm
I set it so all US traffic has to go through an automatic managed challenge before entering the site.
Lowgear wrote: ↑Sat Apr 20, 2024 4:08 am
I'm 40% Russian! ...but 60% Italian. Verified by AncestryDNA.
Oh? Only the US traffic?... Just letting your Russian and Italian "friends" right on in??
Dunno about users in the more Eastern parts of the globe but I just get a white screen saying, "RC10TALK.COM is trying to determine if you are human". Though, I know people who're still trying to figure that out.
Sets a cookie so you don't have to go through the verification every time. Unless you dump your browser after every session... then it's a little cookie monster.
Dangeruss wrote: ↑Sat Apr 20, 2024 8:11 am
Sets a cookie so you don't have to go through the verification every time. Unless you dump your browser after every session... then it's a little cookie monster.
Cookie Monster.jpg
It's done it to me three times today, and I haven't cleared anything.
It also gives me a prompt when I refresh the page.
Always looking for new and interesting ways to waste money.
juicedcoupe wrote: ↑Sat Apr 20, 2024 11:18 am
It's done it to me three times today, and I haven't cleared anything.
It also gives me a prompt when I refresh the page.
Oh wow, that's no fun. Wonder why it's treating users differently. Mind of it's own? A.I. with attitude? Oh crap... is it Master Control and we're stuck inside TRON??
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
I recently rebuilt a triumph for some vintage racing here in Australia and it became apparent quite quickly that there really isn't much info about these cars on the net. So if there are any owners of these cool cars out there, we could keep...
i just scanned the board index here, (might have missed something), but didn't see any appropriate forums for discussing the rc8.2e. not sure if there is a place here.
otherwise, rc10talk has been HUGELY helpful to me in getting my old gold pan...
this is gonna come off more like a rant since i'm in a bad mood..........................
usually, when posts come up in threads about how someone doesn't know why someone else has all of these cars and doesn't use them, they just let them sit on a...
Last post
....CDO (its like OCD, but in alphabetical order, LIKE IT SHOULD BE!!! :x
started with a jrx2 based edm, ended with wedge bodied cobbed together rc10/houge kit w/jg lowering kit.
we also had a bbt or ascot sprinter. i gotta get pics up of that so you guys can tell me what...
Last post
Any suggestions then, I have already ordered a McAllister #237 Bakersfield Late Model body 10” wide because this is what was suggested for a buggy conversion, I plan on running SC10 front hex conversion axles and spindles so the wide gt spindles are...
Through my eBay fun, I have ended up with a spare set of trailing arms set up (Andy's/S&K) and have this question to the guys who have actually run trailing arms....
What does it do to the handling of the car? Too much rear traction, making the car...
Last post
I think you will find that most molded graphite tubs will lack the strength for a suspension mount of that variety. Specifically, I think you will have to grind off the edge of the tub to get the suspension block to fit, and I don't think the...
I'll post some progress pics of the track but here is the skinny- I have a medium sized natural terrain/surface outdoor track at our house, nice mix of fast and tight sections perfect for 2wd/4wd buggies an trucks with 27t stock or 17.5 motors.
I...
Last post
Better pics from Anthony's visit, and Lowry's- DSCN6241.JPG DSCN6242.JPG DSCN6246.JPG DSCN6270.JPG DSCN6278.JPG DSCN6282.JPG DSCN6291.JPG DSCN6280.JPG
Thanks Rod!! DSCN6240.JPG
1991 RC10CE....1991 Transmitter :P DSCN6244.JPG Lowry though that...