RC10Talk - The Net's Largest Vintage R/C Community

Few pictures with it's older brother

Putting the finishing touches on a RC10GX stealth car from the kit that Grand Prix 3D sells. https://grandprix3d.store/products/rc10gx-stealth-masami-1989-world-champ-replica-conversion-kit?_pos=2&_sid=1ecb21244&_ss=r&variant=40023048781898 Really like how the car is coming along, the pa...

My finished car, came out better than I hoped

Chipping away at mine I have a 89 worlds conversion kit that I got from Fan RC that I am using on it, most of it fits after I re-drilled the chassis using the new one as a template. if you go this route make sure you have a dremel tool! it isn't pretty but who cares since this car has undertray the...

Yokomo Super Dogfighter, 89 worlds conversoin

The turnbuckles are copies for an RC10 that I found on Ebay.

Shocks are from Fan RC. They are really nice, they come with seals, all the hardware and springs but you can use any associated sized spring. Same with the pistons

Mine is almost done, just have to finish the body.

Chipping away at mine I have a 89 worlds conversion kit that I got from Fan RC that I am using on it, most of it fits after I re-drilled the chassis using the new one as a template. if you go this route make sure you have a dremel tool! it isn't pretty but who cares since this car has undertray the ...

5 link JRX2

Overview shot showing the electronics The car came with a Tekin Pro Tempret speedo which goes with the Trinity motor so it stays, I added extensions to the motor wires so I can direct solder them to the motor. I still use an Airtronics M8 so I found a receiver that works with my radio and happens to...

Cut out the body and mounted it up along with the wing, I will be honest I wasn't a huge fan of this car even after it was back together but after I put the body on I changed my mind. I like how the body covers the whole rear end, it's pretty sleek. Not sure exactly what I am going to do for paint a...

My RC10 stealth car, short arm version based on the chassis kit that Michael Vollmer sells.

Build link has more details
https://www.rc10talk.com/viewtopic.php?t=46375

The car came with the stock wheels, the fronts were in pretty good shape and as a bonus the original front tires were in the box and didn't look like they were ever used. The rear rims are ok, the outer lip is pretty scratched up but at least they are not painted or cracked. I ended up buying a new ...

Finished rear end I replace all the suspension links with 3D printed ones since it was all I could find. I ordered white ones since I have been messing around with dying parts with Rit Dye which worked pretty well for me with some old wheels. Tried dying them black which didn't really go to plan, I ...

Here is the competed front end I put new arms on it, they are 3D printed but are new. The ones on the car were ok, the were scratched a bit but also were bent like they were sitting in the sun too long. The c hubs and steering arms are fine, just cleaned. I put new ball cups on it and a new reproduc...