RC10Talk - The Net's Largest Vintage R/C Community

Some modern Losi - buggy full custom anodizing (yep, been on a kick to make them all unique) - yes, I run them too...

The one that was in my mind for decades before I actually built it - I still havent run it, but I will one day....

My XX buggy above before all the purple was added and before being brutally snapped in half by 'someone' sending it like a goofball during a race.

Share your favorite ESC from your collection vintage or contemporary. I'm not a collector, but in my quest for period-correct electronics I've come to appreciate them over the decades. ESC's never get reissued and there is something very timeless about them. Their technology made a big difference in...

Was my first legit ESC. 410-M5 Sport s-l300.jpg Most elusive/lusted after/will never find/can't afford if found/not actively searching for/most lusted after: TRX Pro XL-3 Pic courtesy of danielhr77, over on the traxxas.com forums 43ygQw.jpg Crud I failed to read, "from your collection".......

*Edit - I just realized that I received 2 of the rear mounts, but the pictures below show 2 of the front mounts are needed if you want to run this style of dual brakes. Maybe it was an oversight. I'm not planning on making any changes anyway. * These old photos show the 3 mount setup. It looks like...

After boiling the nylon A-arms for a few minutes, I put everything in another bath of 3% peroxide and placed it outside since we had a mostly full day of sunshine, didn't time it but roughly 9 hours I'd say. Can now definitely tell it made some bit of difference, boiling the nylon A-arms certainly d...

Lavigna wrote: ↑Fri Jun 10, 2022 9:26 pm I finally splurged on some MIP drivers. They actually came from the LHS.

Those are really good prices on those drivers.

Got something to add to this buggy should have the bits fitted soon hopefully

Getting back around to this and added the brushed system and RX; Futaba R203GF receiver, Novak GTS esc & Reedy Ti 12x2 brushed motor. It'll be dressed with the T4 RS pre-painted body, shown here, until the T4.1 FT body gets painted and decaled. Haven't ran it yet besides on the stand to verify s...

Just cleaned this one up, added new bearings and brushes, but kept the gold springs which seem pretty soft. It's a triple wind armature, but not certain how many turns. The armature looks identical to the armature in my Monster Horsepower 1987 World Champion Joel Magic Johnson black can motor, which...

Hello! This is my assembled RC10GX from Japan. It is the latest Japan spec based off the RC10 Graphite Team Car #6036. Yokomo was the early distributor for Team Associated in the early years, and Masami also helped to race and develop the car. The ball connectors, ball cups, tie-rods, and wheels/tir...

It's been quite a while since I posted something new so here is my Composite Craft TRX-1. Just finished it up to this point here With some electronics
LRP Indy 600

A Hawk was also my first performance oriented hobby grade RC it was the vehicle I traded for my first Losi. I would love to get ahold of one again sometime down the line but the time just never seems right... Maybe I can find someone who wants to trade one for a vintage Losi to go full circle lol Yo...

Looks good